PubMed Health⌕ Search

Biomedical subjects

Yilin Wang

Publications and source records attributed to Yilin Wang.

At least 19 recordsLinked to original sources

Humanizing acidic mammalian chitinase variants establish lung immune conditioning and control environmentally driven inflammation and fibrosis.

Chitin, a widespread environmental particle constituent, triggers lung inflammation but is degraded by chitinases. In humans, single-nucleotide polymorphisms (SNPs) in CHIA (acidic mammalian chitinase; AMCase) are associated with lung disease, suggesting that chitinase variants influence responses to airborne particles. Here, we edit the mouse Chia1 locus to generate humanized (hChia) mice harboring common human SNPs. Compared with controls expressing disease-protective SNPs, hChia mice lack robust chitinase activity and fail to degrade natural chitin substrates. Lung-resident lymphocytes and macrophages are spontaneously primed and sensitive to inflammatory triggering by environmental chitin. Immune cell infiltration correlates with airway chitin following challenge, and hChia mice exhibit exacerbated inflammatory and fibrotic lung disease. In humans with acute respiratory failure, alveolar hemorrhage coincides with environmentally derived chitin particles that are susceptible to chitinase degradation, attenuating inflammatory cell responses. Thus, environmental chitin and chitinase activity are crucial determinants of lung immune conditioning with potential therapeutic applications.

AMCase↗

Viral inhibition of the anaphase promoting complex enhances replication by elevating nucleotide pools.

The anaphase promoting complex/cyclosome (APC/C) is a large, ubiquitin ligase and a central regulator of cell cycle progression. By targeting key substrates for degradation during mitosis and G1 phase, the APC/C coordinates metabolic fluctuations that occur during the cell cycle. A diverse range of viruses have convergently evolved mechanisms to bind and inhibit the APC/C; however, a molecular understanding for these interactions has never been demonstrated. Here, we use chicken anemia virus (CAV), a small single-stranded DNA virus encoding only three proteins, to demonstrate the importance of viral APC/C inhibition during replication. We show that the Vp3 protein of CAV inhibits the APC/C, causing a dramatic mitotic arrest during infection. The mutant virus lacking Vp3 is defective for replication and can be rescued by APC/C inhibition. Metabolomic profiling during CAV infection revealed that Vp3 expression mediates a broad increase in nucleotide pools. Moreover, viral inhibition of the APC/C resulted in stabilization of enzymes required for nucleotide biosynthesis. These findings suggest that the APC/C is a general target of many viruses to elevate nucleotide levels and facilitate viral genome replication.

Anaphase-Promoting Complex-Cyclosome↗

Controllable organization of a carboxylic acid type gemini surfactant at different pH values by adding Copper(II) ions.

The gemini surfactant sodium 4,8-dioctyl-3,9-dioxo-6-hydroxy-4,8-diaza-1,11-undecanedicarboxylate (SDUC), bearing two carboxylic headgroups and two hydrocarbon chains, has been synthesized, and its self-organization characteristics at strong basic and neutral environments have been studied. The results reveal that a transition from micelles to vesicles in SDUC aqueous solution occurs when the pH drops from 12.0 to 7.0. When a small amount of Cu(2+) ion is added to the SDUC solutions at both pH 12.0 and 7.0, remarkable transformations were observed within the SDUC aggregate structures. At pH 12.0, micelles transform into vesicles as Cu(2+) is added, while the vesicles of SDUC are formed at pH 7.0 and these small vesicles tend to fuse into larger ones slowly. Moreover, these SDUC vesicles at pH 7.0 undergo a relatively fast fission process when Cu(2+) is added in. An attempt has been made to explain the mechanism of these transformations.

Alkanes↗

Solvent effect on the aggregate of fluorinated gemini surfactant at silica surface.

The aggregate states of partially fluorinated gemini surfactant [(CF3)2CF(CF2)2(CH2)10N(CH3)2]2(CH2)6Br2 (C(F)(5)C10-C6-C10C(F)(5)) on silica surface were investigated with atomic force microscopy (AFM) and water contact angle (CA) measurement by analyzing the effects of bulk concentration and adsorption time on stack state. On surfactant-adsorbed silica surfaces, there was a flat surface layer interspersed with some scattering surfactant aggregates. In the case of short adsorption times, the aggregates would be hemisphere. In the case of long adsorption times, the aggregates would be present in the form of bilayers. With the increase of bulk concentration, the adsorbed amount was enlarged and the surface layer became more compact. The formation of patchy bilayer aggregates indicated the saturation of the surface layer. Furthermore, organic solvent effects on the aggregate state of the surfactant on a silica surface were studied with four organic solvents, including n-hexane, dehydrated ethanol, 1,1,2-trichloro-1,2,2-trifluoroethane, and toluene. With the treatment of different organic solvents, the hemisphere aggregates on the surface layer can rearrange into spherical bilayer, rodlike monolayer, and branched rodlike monolayer aggregates, respectively. The polarity of solvents and affinity of organic solvents for surfactant molecules may have a great impact on the stack state of the fluorinated gemini surfactant molecules.

Adsorption↗

Alzheimer amyloid beta(1-40) peptide: interactions with cationic gemini and single-chain surfactants.

The aggregation of amyloid beta-peptide [Abeta(1-40)] into fibril is a key pathological process associated with Alzheimer's disease. The effect of cationic gemini surfactant hexamethylene-1,6-bis-(dodecyldimethylammonium bromide) [C(12)H(25)(CH(3))(2)N(CH(2))(6)N(CH(3))(2)C(12)H(25)]Br(2) (designated as C(12)C(6)C(12)Br(2)) and single-chain cationic surfactant dodecyltrimethylammonium bromide (DTAB) on the Alzheimer amyloid beta-peptide Abeta(1-40) aggregation behavior was studied by microcalorimetry, circular dichroism (CD), and atomic force microscopy (AFM) measurements at pH 7.4. Without addition of surfactant, 0.5 g/L Abeta(1-40) mainly exists in dimeric state. It is found that the addition of the monomers of C(12)C(6)C(12)Br(2) and DTAB may cause the rapid aggregation of Abeta(1-40) and the fibrillar structures are observed by CD spectra and the AFM images. Due to the repulsive interaction among the head groups of surfactants and the formation of a small hydrophobic cluster of surfactant molecules, the fibrillar structure is disrupted again as the surfactant monomer concentration is increased, whereas globular species are observed in the presence of micellar solution. Different from single-chain surfactant, C(12)C(6)C(12)Br(2) has a much stronger interaction with Abeta(1-40) to generate larger endothermic energy at much lower surfactant concentration and has much stronger ability to induce the aggregation of Abeta(1-40).

Alzheimer Disease↗

Fabrication of highly antireflective silicon surfaces with superhydrophobicity.

Highly antireflective porous silicon surfaces with superhydrophobicity were obtained by means of chemical etching and fluoroalkylsilane self-assembly. The results show that wettability and reflectivity of these surfaces strongly depend on the etching method and the resultant surface morphology. All of the four resultant porous silicon surfaces by alkaline etching, acidic etching, thick Pt-assisted acidic etching, and thin Pt-assisted acidic etching can reduce reflectance, but the efficiency differs greatly. Except for the alkaline etching, the porous silicon surfaces produced by the other three etching methods can reach superhydrophobicity after fluoroalkylsilane modification. These differences are due to the different surface morphology and roughness. Moreover, the porous silicon surface produced by thin Pt-assisted acidic etching presents abundant holes and particles with diameters ranging from nanometers to submicrometers. This morphology enables the porous silicon surface to own a very low reflectance value that is averaged to be about 3% over the whole experimental photon wavelength spanning 300-800 nm.

Journal Article↗

The surface chemistry of propylene, 1-iodopropane, and 1,3-diiodopropane on MoAl alloy thin films formed on dehydroxylated alumina.

The adsorption of C3 hydrocarbons propylene, 1-iodopropane, and 1,3-diiodopropane is studied in ultrahigh vacuum on a molybdenum-aluminum alloy formed by molybdenum hexacarbonyl reaction with a planar alumina film grown on a Mo(100) substrate. Carbon-iodine bond scission occurs below approximately 200 K to deposit iodine, and form propyl species from 1-iodopropane and a C3 metallacycle from 1,3-diiodopropane. Propyl species either undergo beta-hydride elimination to yield propylene or hydrogenate to form propane. Propylene adsorbs as both pi- and di-sigma-bonded species, and the di-sigma form hydrogenates to yield propane, where the addition of the first hydrogen to form propyl species is slower than the second hydrogenation step to yield propane. Propylene also thermally decomposes on the surface to desorb hydrogen and deposit carbon where the methylyne group is the most, and the methyl group the least reactive. The metallacyclic intermediate reacts to give an allylic intermediate, which forms propylene, but also decomposes by C-C bond cleavage to evolve ethylene and deposit methylene species on the surface. This is a key step in the mechanism proposed for heterogeneously catalyzed olefin metathesis and this is the first time that this chemistry has been directly identified in ultrahigh vacuum.

Journal Article↗

Formation and decomposition of C3 metallacycles from ethylene and methylene on MoAl alloy thin films.

The reaction between adsorbed ethylene and methylene species has been investigated on a molybdenum-aluminum alloy grown from Mo(CO)(6) on a planar alumina film formed on a Mo(100) single crystal in ultrahigh vacuum. Di-sigma-bonded ethylene reacts with carbene species, formed on the surface from methylene iodide, to form a C(3) metallacycle. This predominantly decomposes to yield propylene, while a smaller portion yields cross-metathesis products since (12)C(13)CH(4) is formed from reaction between (13)C(2)H(4) and (12)CH(2). This work demonstrates for the first time that the reaction proceeds in heterogeneous phase via a C(3) metallacycle as proposed in the Hérisson-Chauvin mechanism.

Journal Article↗

Comparative studies on interactions of bovine serum albumin with cationic gemini and single-chain surfactants.

The interactions of bovine serum albumin (BSA) with cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) [C12H25(CH3)2N(CH2)(S)N(CH3)2C12H25]Br2 (designated as C12C(S)C12Br2, S = 3, 6, and 12) and single-chain surfactant dodecyltrimethylammonium bromide (DTAB) have been studied with isothermal titration microcalorimetry, turbidity, fluorescence spectroscopy, and circular dichroism at pH 7.0. Comparing with DTAB, C12C(S)C12Br2 have much stronger binding ability with BSA to induce the denaturation of BSA at very low molar ratio of C12C(S)C12Br2/BSA, and C12C(S)C12Br2 have a much stronger tendency to form insoluble complexes with BSA. The binding of C12C(S)C12Br2 to BSA generates larger endothermic peaks. The first endothermic peak is much stronger than that of the second endothermic peak. The double charges and strong hydrophobicity of the gemini surfactants are the main reasons for these observations. In addition, the spectra results show that the binding of DTAB to BSA only promotes BSA unfolding and aggregation, whereas the secondary structure of BSA is possibly stabilized by a small amount of C12C(S)C12Br2 , even if the small amount of binding C12C(S)C12Br2 could induce the loss of the tertiary structure of BSA. This result may be related to the double tails of gemini surfactants, which may generate the hydrophobic linkages between the nonpolar residues of BSA.

Calorimetry↗

Adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) gemini surfactant on silica and its effect on wettability.

The adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) gemini surfactant on silica and its effect on wettability have been studied. The structure of the adsorbed aggregates experiences an evolving course with the increase of C(12)C(6)C(12)Br(2) concentration. It is from no aggregates to circular islands, then to semicontinuous islands, and at last to the two-bilayer structure. No matter what kind of aggregates are in existence, their thickness values are to be the same 3.3+/-0.3 nm. The fraction of silica surface covered by the surfactant aggregates also varies from nearly zero at 0.05 mM to approximately 0.92 at 5.0 mM. The variation of contact angle against C(12)C(6)C(12)Br(2) concentration shows two distinct regions. The upward shift indicates that the surfactant molecules are adsorbed with their hydrophobic tails facing air upon increasing concentration, while the downward shift reveals that the surfactant aggregates are in existence with the hydrophilic headgroups facing air. IR spectra suggest that two different courses are involved with the increase of the surfactant concentration. One possible course is that the surfactant tails pack more closely and orderly, and the other may be that the spacer changes from stretched profile to bended conformation upon increasing the surfactant concentration.

Journal Article↗

Aggregation behavior in mixed system of double-chained anionic surfactant with single-chained nonionic surfactant in aqueous solution.

The aggregation behavior of mixed systems of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) or sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) with nonionic surfactant pentaethylene glycol mono-n-dodecyl ether (C12E5) have been studied by means of steady-state fluorescence, electrical conductivity, dynamic light scattering, transmission electron microscopy, electrophoretic light scattering and pyrene solubilization measurements. The critical concentrations for aggregation, micropolarity, mobility, solubilization capacity and morphology of aggregates are characterized. Two critical concentrations for aggregation are observed in the mixed surfactants, which may correspond to the formation of different kinds of aggregates. Moreover, it is more favorable for AOT-C12E5 to form mixed vesicles compared to SBPBS-C12E5 at higher mole fraction of C12E5. In addition, it is revealed that SBPBS-C12E5 mixture has larger solubilization capacity for pyrene than AOT-C12E5 system.

Journal Article↗

Binding of sodium dodecyl sulfate with linear and branched polyethyleneimines in aqueous solution at different pH values.

Isothermal titration microcalorimetry (ITC), conductivity, and turbidity measurements have been carried out to study the interaction of sodium dodecyl sulfate (SDS) with polyethyleneimines (PEI) including linear PEI and branched PEI at different pH values of 3, 7, and 10. In all cases, the polymers show a remarkable affinity toward SDS. At pH 3, the polymer PEI is a strong polycation, and the binding is dominated by electrostatic 1:1 charge neutralization with the anionic surfactant. At pH 7, the electrostatic attraction between SDS and PEI is weak, and the hydrophobic interaction becomes stronger. At the natural pH of 10, PEI is essentially nonionic and binds SDS in the form of polymer-bound surfactant aggregates. The charge neutralization concentration (C1) of SDS for the PEI-SDS complex can be derived from the curves of variation of the enthalpy, conductivity, and turbidity with SDS concentration. There is good agreement between the results from the three methods and all show a decrease with increasing pH. The total interaction enthalpies (deltaH(total)) of PEI with SDS are obtained from the observed enthalpy curves and the difference enthalpy (deltaH*) between the total enthalpy of branched PEI with SDS, and the total enthalpy of linear PEI with SDS can be derived from the obtained deltaH(total). The difference deltaH* increases dramatically as pH increases, which indicates that the interactions are different for linear PEI and branched PEI at high pH values. A schematic map of the different states of aggregation is presented.

Journal Article↗

Aggregation properties of cationic gemini surfactants with partially fluorinated spacers in aqueous solution.

The aggregation properties of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide), [C(12)H(25)(CH(3))(2)N(CH(2))(m)(CF(2))(n)(CH(2))(m))N(CH(3))(2)C(12)H(25)]Br(2) [where 2m + n = 12 and n = 0, 4, and 6; designated as 12-12-12, 12-12(C(4)(F))-12, and 12-12(C(6)(F))-12, respectively] have been studied by microcalorimetry, time-resolved fluorescence quenching, and electrical conductivity. Compared with a fully hydrocarbon spacer of 12-12-12, the fluorinated spacer with a lower ratio of CF(2) to CH(2) in 12-12(C(4)(F))-12 tends to disfavor the aggregation, leading to larger critical micelle concentration (cmc), lower micelle aggregation number (N), and less negative Gibbs free energy of micellization (DeltaG(mic)). However, the fluorinated spacer with a higher ratio of CF(2) to CH(2) in 12-12(C(6)(F))-12 may prompt the aggregation, resulting in lower cmc, higher N, and more negative DeltaG(mic). It is also noted that enthalpy change of micellization (DeltaH(mic)) for 12-12(C(4)(F))-12 is the most exothermic, but the values of DeltaH(mic) for 12-12-12 and 12-12(C(6)(F))-12 are almost the same. These results are rationalized in terms of competition among the enhanced hydrophobicity and the rigidity of the fluorinated spacer, and the variation of immiscibility of the fluorinated spacer with the hydrocarbon side chains.

Journal Article↗

Self-assembly of amino-functionalized monolayers on silicon surfaces and preparation of superhydrophobic surfaces based on alkanoic acid dual layers and surface roughening.

Reproducibly smooth amino-functionalized surfaces were obtained by deposition of aminopropyltrimethoxysilane (APTMS) at the vapor/solid interface. Characteristics of these amino-functionalized surfaces were evaluated based on atomic force microscopy, water contact angle measurement and X-ray photoelectron spectroscopy. The results showed that APTMS modified surfaces are very homogeneous and the chemical reactivity of modified surfaces can be ensured with high free amino content. Furthermore, for the purpose of tailoring the wettability of silicon surface, dual self-assembled films were achieved by performing reaction between amino-functionalized surface and n-alkanoic acids with different chain length. The wettability of the self-assembled films can be adjusted with altering the hydrocarbon chain length of alkanoic acids. Moreover, cooperation of dual self-assembled films with surface roughening, superhydrophobic surfaces with CA larger than 153 degrees were obtained. Thus, the wettability of modified surfaces can be altered greatly with changing hydrocarbon chain length of self-assembled films.

Journal Article↗

Microcalorimetric study on micellization of nonionic surfactants with a benzene ring or adamantane in their hydrophobic chains.

The micellization of a novel family of nonionic surfactants poly(oxyethylene) glycol alkyl ethers has been studied by microcalorimetry. One of the surfactants has adamantane, and the other nonionic surfactants have a benzene ring in their hydrophobic chains, which moves from the terminal of the hydrophobic chain toward the headgroup. Moreover, the alkyl chain of the nonionic surfactants is straight or branched. Both the critical micelle concentration (cmc) and the thermodynamic parameters associated with the micelle formation have been obtained. The cmc decreases and the enthalpy of micelle formation (deltaH(mic)) becomes less positive gradually as the length of hydrophobic chain increases, whereas the values of cmc and deltaH(mic) tend to increase for the surfactants with a longer ethylene oxide chain. However, the deltaH(mic) value of the surfactant with seven carbon atoms in a hydrophobic chain is more positive than that of the surfactant with six carbon atoms in a hydrophobic chain. Comparing with the nonionic surfactant with a methylene hydrophobic chain, the surfactants with benzene rings and adamantane groups have larger cmc values and the cmc values increase with the size of the groups. Furthermore, moving the phenyl group from the terminal of the hydrophobic chain to the neighbor of the hydrophilic headgroup leads to the decreased cmc. Both the variation of hydrophobic interaction from the movement of phenyl group and pi-pi interaction among adjacent phenyl groups affect deltaH(mic) values.

Journal Article↗

In situ measurement of solute transport in the bone lacunar-canalicular system.

Solute transport through the bone lacunar-canalicular system is believed to be essential for osteocyte survival and function but has proved difficult to measure. We report an approach that permits direct measurement of real-time solute movement in intact bones. By using fluorescence recovery after photobleaching, the movement of a vitally injected fluorescent dye (sodium fluorescein) among individual osteocytic lacunae was visualized in situ beneath the periosteal surface of mouse cortical bone at depths up to 50 microm with laser scanning confocal microscopy. Transport was analyzed by using a two-compartment mathematical model of solute diffusion that accounted for the characteristic anatomical features of the lacunar-canalicular system. The diffusion coefficient of fluorescein (376 Da) was determined to be 3.3 +/- 0.6 x 10(-6) cm2/sec, which is 62% of its diffusion coefficient in water and is similar to diffusion coefficients measured for comparably sized molecules in cartilage. The diffusion of fluorescein in bone is also consistent with the presence of an osteocyte pericellular matrix whose structure resembles that proposed for the endothelial glycocalyx [Squire, J. M., Chew, M., Nneji, G., Neal, C., Barry, J. & Michel, C. (2001) J. Struct. Biol. 136, 239-255]. To our knowledge, this is the first instance where the dynamics of molecular movement has been measured directly in the bone lacunar-canalicular system. This in situ imaging approach should also facilitate the analysis of convection-based transport mechanisms in bones of living animals.

Animals↗

Odd/even effect in the chain length on the enthalpy of micellization of gemini surfactants in aqueous solution.

The micellization properties of cationic symmetric gemini surfactants, [CmH(2m+1)(CH3)2N(CH2)6N(CH3)2CmH(2m+1)]Br2 (designated as CmC6CmBr2, with m = 7, 8, 9, 10, 11, 12, and 16), has been investigated by isothermal titration microcalorimetry. The critical micelle concentration (CMC) and enthalpy of micellization (DeltaHmic) were determined from calorimetric titration curves. The linear decreasing of log CMC with increasing the length of the hydrophobic chain is consistent with an increase in the hydrophobicity of the alkyl chain. Interestingly, with increasing the length of the alkyl chain, the DeltaHmic values of the surfactants with even numbered alkyl chains vary from endothermic to exothermic, whereas the DeltaHmic values of the surfactants with odd numbered alkyl chains are all endothermic and tend to become more endothermic. The pronounced even/odd effect in DeltaHmic is discussed with respect to the "donor-acceptor" interaction.

Journal Article↗

Interactions of cationic gemini surfactants with hydrophobically modified poly(acrylamides) studied by fluorescence and microcalorimetry.

Steady-state fluorescence, time-resolved fluorescence quenching, and isothermal titration microcalorimetry have been used to study the interactions of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(S)C(12)Br(2), S = 3, 6, and 12) with hydrophobically modified poly(acrylamide) (HMPAM) and unmodified poly(acrylamide) (PAM). Without addition of gemini surfactant, 0.2 wt % HMPAMs except PAM have already self-aggregated into hydrophobic aggregates. Different from single-chain surfactants, C(12)C(S)C(12)Br(2) have stronger interactions with HMPAMs to form surfactant/polymer aggregates, even with PAM. Addition of C(12)C(S)C(12)Br(2) may cause the disruption of HMPAM hydrophobic aggregates and the formation of mixed micelles. It is found that HMPAMs generate lower micropolarity of mixed micelles, larger values of enthalpy of interaction (DeltaH(ps)), and nearly constant values of Gibbs free energy of interaction (DeltaG(ps)). On the other hand, C(12)C(S)C(12)Br(2) with longer spacer brings out slightly lower micropolarity of mixed micelles, owing to the lower electrostatic repulsion between surfactant headgroups. Especially for C(12)C(12)C(12)Br(2), the values of DeltaH(ps) are much more endothermic and the values of DeltaG(ps) are much less negative. The weaker interactions of C(12)C(12)C(12)Br(2) with HMPAMs arise from the marked reduction of attraction between surfactant headgroups and polymer hydrophilic groups induced by its longer spacer.

Journal Article↗