PubMed Health⌕ Search

Biomedical subjects

Yimei Zhu

Publications and source records attributed to Yimei Zhu.

17 recordsLinked to original sources

Comparison of decanethiolate gold nanoparticles synthesized by one-phase and two-phase methods.

We investigated the differences between the decanethiolate gold nanoparticles synthesized by two different routes: one-phase and two-phase methods. Their properties were compared in bulk and at the air-water interface by transmission electron microscopy (TEM), X-ray reflectivity (XR), extended X-ray absorption fine structure (EXAFS) spectroscopy, X-ray powder diffraction (XRD), thermal gravimetric analysis (TGA), time-of-flight secondary-ion mass spectrometry (TOF-SIMS), electron paramagnetic resonance (EPR), and Langmuir-Blodgett technique. The mean nanoparticles sizes obtained by EXAFS and XRD were found to be smaller than those by the TEM measurements. We explained these differences by the structural disorder and multiple twinning in the nanoparticles. The one-phase particles were found by EXAFS to be smaller and had a higher grafting density of thiol chains than the two-phase particles. We attributed these differences to the enhanced disorder of the one-phase particles. At the air-water interface, the one-phase particles did not spread, while the two-phase particles spread and formed Langmuir films. TEM and XR results revealed that the close-packed monolayer of the two-phase particles collapsed and folded into multilayer films upon further compression.

Journal Article↗

Transferring self-assembled, nanoscale cables into electrical devices.

This study details a new derivative of the contorted HBCs that self-organizes into one-dimensional, single-crystalline fibers. X-ray diffraction, transmission electron microscopy, and electron diffraction studies show that they have an orthorhombic unit cell with dimensions of 5.8 nm x 4.5 nm x 0.45 nm. Each fiber is composed of a few thousands columns. A method is put forth that utilizes elastomer stamps to manipulate and position isolated fibers in organic field effect transistors.

Journal Article↗

Bright-field TEM imaging of single molecules: dream or near future?

We examine the suitability of spherical aberration (C(S))-corrected (CS) and uncorrected (UC) transmission electron microscopes (TEM) for conventional bright-field imaging of radiation-sensitive materials. We have chosen an individual molecule suspended in vacuum as a hypothetical example of a well-defined radiation-sensitive sample. We find that for this particular sample, CS instruments provide about 30% improvement over an UC instrument in terms of signal/noise ratio per unit electron dose at 300kV. The lowest imaging doses can be achieved in CS instruments equipped with high-brightness electron source operated at low incident electron energies. Our calculations suggest that it may be possible to image individual, iodine- or bromine-substituted organic molecules in bright-field mode, at doses lower than the accepted values for radiation damage of aromatic molecules.

Journal Article↗

Optical spectroscopy of individual single-walled carbon nanotubes of defined chiral structure.

We simultaneously determined the physical structure and optical transition energies of individual single-walled carbon nanotubes by combining electron diffraction with Rayleigh scattering spectroscopy. These results test fundamental features of the excited electronic states of carbon nanotubes. We directly verified the systematic changes in transition energies of semiconducting nanotubes as a function of their chirality and observed predicted energy splittings of optical transitions in metallic nanotubes.

Journal Article↗

Characterization of palladium nanoparticles by using X-ray reflectivity, EXAFS, and electron microscopy.

We compared the characteristics of dodecanethiolate palladium nanoparticles synthesized by two different techniques, a one-phase method and a two-phase method. From transmission electron microscopy (TEM), we determined that the particle sizes were 46 +/- 10 angstroms and 20 +/- 5 angstroms for the one- and two-phase particles, respectively. Electron diffraction confirmed that their structure was face-centered cubic (fcc). The lattice constant a0 was 3.98 +/- 0.01 angstroms and 3.90 +/- 0.01 angstroms for the one- and two-phase particles, respectively. High-resolution TEM (HRTEM) showed that the one-phase particles had an ordered core surrounded by a disordered shell structure, while the two-phase particles appeared to be crystalline throughout. The particles were also analyzed with extended X-ray absorption fine structure (EXAFS). A cuboctahedral fcc model was used to fit the data, which implied particle sizes of less than 10 angstroms for both the one- and two-phase particles. The discrepancy between the two techniques was attributed to the presence of a disordered phase, which we presumed was composed of Pd-S compounds. Compared with the bulk palladium, lattice expansion was observed in both one- and two-phase particles by electron diffraction, HRTEM, and EXAFS. At the air/water interface, a uniform film that produced surface pressure/area isotherms could only be obtained from the two-phase particles. The one-phase particles did not wet the water surface. X-ray reflectivity data indicated that the Langmuir monolayer of the two-phase particles was only 13 angstroms thick. TEM revealed the diameter of the particles in this layer to be 23 angstroms; hence the particles assumed an oblate structure after spreading. EXAFS examination of a stack of 750 Langmuir monolayers indicated far fewer Pd-S compounds, which may have dissolved in the water. The data were consistent with a model of a monolayer of truncated cuboctahedron Pd particles that were 7 angstroms thick and 19 angstroms in diameter.

Journal Article↗

Inversion of two-band superconductivity at the critical electron doping of (Mg, Al)B2.

Electron energy-loss spectroscopy (EELS) was combined with heat capacity measurements to probe changes of electronic structure and superconductivity in Mg(1-x)Al(x)B(2). A simultaneous decrease of EELS intensity from sigma-band hole states and the magnitude of the sigma gap was observed with increasing x, thus verifying that band filling results in the loss of strong superconductivity. These quantities extrapolated to zero at x approximately 0.33 as inferred from the unit cell volume. However, superconductivity was not quenched completely, but persisted with T(c) < 7 K up to about x approximately 55. Only the pi band had detectable density of states for 0.33 < or =x < or = 0.55, implying an inversion of the two-band hierarchy of MgB(2) in that regime. Since pi-band superconductivity is active in other materials such as intercalated graphite, implications for new materials with high T(c) are discussed.

Journal Article↗

Quasi-continuous growth of ultralong carbon nanotube arrays.

We report the growth of ultralong (>10 cm) multi-walled and single-walled carbon nanotubes such that the length is limited by the size of the furnace rather than by the termination of growth. The disturbance of microscale laminar flows results in disordered or shorter growth of carbon nanotubes. By downsizing reaction pipes, reaction gas flows are stabilized with low Reynolds numbers. In this way, the catalyst nanoparticles at the end of growing carbon nanotubes can travel a longer distance to grow ultralong nanotubes.

Chlorides↗

Formation and oxidation state of CeO(2-x) nanotubes.

Well-crystalline CeO(2-x) nanotubes are synthesized via a mild hydrothermal reaction route using cerium nitrate and ammonium hydroxide as reactants. The CeO(2-x) nanotubes have the same structure as the bulk CeO2 but larger lattice parameter. The measurement of the ratio of M5/M4 edge shows the valence reduction of cerium ions for the CeO(2-x) nanotubes.

Cerium↗

Copper oxide nanocrystals.

It is well-known that inorganic nanocrystals are a benchmark model for nanotechnology, given that the tunability of optical properties and the stabilization of specific phases are uniquely possible at the nanoscale. Copper (I) oxide (Cu(2)O) is a metal oxide semiconductor with promising applications in solar energy conversion and catalysis. To understand the Cu/Cu(2)O/CuO system at the nanoscale, we have developed a method for preparing highly uniform monodisperse nanocrystals of Cu(2)O. The procedure also serves to demonstrate our development of a generalized method for the synthesis of transition metal oxide nanocrystals. Cu nanocrystals are initially formed and subsequently oxidized to form highly crystalline Cu(2)O. The volume change during phase transformation can induce crystal twinning. Absorption in the visible region of the spectrum gave evidence for the presence of a thin, epitaxial layer of CuO, which is blue-shifted, and appears to increase in energy as a function of decreasing particle size. XPS confirmed the thin layer of CuO, calculated to have a thickness of approximately 5 A. We note that the copper (I) oxide phase is surprisingly well-stabilized at this length scale.

Journal Article↗

An organometallic synthesis of TiO2 nanoparticles.

We report the synthesis of TiO2 nanoparticles that uses the low-temperature reaction of low-valent organometallic precursors. Bis(cyclooctatetraene)titanium reacts with dimethyl sulfoxide in organic solution at temperatures as low as room temperature to produce TiO2. In the absence of any supporting ligand, the reaction gives precipitation of amorphous TiO2 powder; however, in the presence of basic ligands such as tributylphosphine, tributylphosphine oxide and trioctylphosphine oxide, the precipitation is arrested, and chemically distinct, isolated, internally crystalline TiO2 nanoparticles are formed.

Crystallization↗

In-situ formation of ultrathin Ge nanobelts bonded with nanotubes.

A novel nanostructure of ultrathin Ge nanobelts bonded with nanotubes has been fabricated and characterized. Nanotubes (either carbon or BN) are first coated with amorphous germanium and then heated and observed by an in-situ TEM. The thickness, down to 2 nm, and the width of the Ge nanobelts are determined by the thickness of this amorphous Ge coating and the diameter of nanotubes, respectively.

Crystallization↗

Assembly and interaction of Au/C core-shell nanostructures: in situ observation in the transmission electron microscope.

Using transmission electron microscopy, we identify the temperature-dependent interaction pathway of carbon-supported Au nanoparticles. At low temperature (room temp. to 400 degrees C), Au nanoparticles predominantly interact by coalescence initiated by an atomic Au bridge. At high temperature (400-800 degrees C), the particles assemble into Au/C core-shell nanostructures. C-shells around individual nanoparticles passivate their surface and prevent coalescence. Ultimately coalescence does occur via rupture of the passivating shells, which invariably follows the assembly of C sheets enveloping and compressing multiple closely spaced Au/C nanoparticles.

Journal Article↗

Zinc oxide quantum rods.

Nanoscale zinc oxide (ZnO) rods of diameters close to the Bohr-exciton radius ( approximately 2 nm) can be prepared from a simple acetate precursor, resulting in ligand-capped rods of ZnO, highly dispersible in nonpolar solvents. Zinc oxide, ZnO, is a wide band-gap semiconductor with applications in blue/ultraviolet (UV) optoelectronic devices and piezoelectric devices. We observe self-assembly into uniform stacks of nanorods aligned parallel to each other with respect to the long axis, and photoluminescence measurements provide evidence for one-dimensional quantum confinement.

DNA Probes↗

Direct evidence for negative grain boundary potential in Ca-doped and undoped YBa2Cu3O7-x.

Using electron holography in a transmission electron microscope, we obtained direct evidence for the reduction of negative charge at grain boundary dislocations in Ca-doped YBa2Cu3O7 (YBCO) when compared to undoped YBCO. Because of the finite width of the valence band in the superconducting CuO2 planes, the negative grain boundary charge can lead to a depletion of electron holes available for superconductivity. A significant reduction in the size of the perturbed region in the Ca-doped samples appears to be the principal mechanism for the improved interfacial superconductivity.

Journal Article↗

Deterministic phase unwrapping in the presence of noise.

We present a new Fourier-based exact solution for deterministic phase unwrapping from experimental maps of wrapped phase in the presence of noise and phase vortices. This single-step approach has superior performance for images with high phase gradients or insufficient digital sampling approaching 2pi/pixel and therefore performs as a fast and practical solution for the phase-unwrapping problem for experimental applications in applied optics, physics, and medicine.

Journal Article↗

Fast phase unwrapping algorithm for interferometric applications.

A wide range of interferometric techniques recover phase information that is mathematically wrapped on the interval (-pi, pi). Obtaining the true unwrapped phase is a longstanding problem. We present an algorithm that solves the phase unwrapping problem, using a combination of Fourier techniques. The execution time for our algorithm is equivalent to the computation time required for performing eight fast Fourier transforms and is stable against noise and residues present in the wrapped phase. We have extended the algorithm to handle data of arbitrary size. We expect the state of the art of existing interferometric applications, including the possibility for real-time phase recovery, to benefit from our algorithm.

Journal Article↗