Biomedical subjects

Yoon Yeo

Publications and source records attributed to Yoon Yeo.

16 recordsLinked to original sources

PubMed2007

Anti-inflammatory function of an in situ cross-linkable conjugate hydrogel of hyaluronic acid and dexamethasone.

Postoperative peritoneal adhesions cause pelvic pain, infertility, and potentially lethal bowel obstruction. We have designed and synthesized an injectable hydrogel composed of cross-linkable modified hyaluronic acids (HAs) conjugated to dexamethasone (HAX-DEX), and investigated its anti-inflammatory function. HAX-DEX formed a hydrogel in <1min by cross-linking reactions between aldehyde groups and hydrazide groups. The hydrogel degraded in media over 5 days, releasing dexamethasone slowly over that time, reducing TNF-alpha and IL-6 production from lipopolysaccharide-stimulated primary mouse macrophages in vitro. HAX-DEX was biocompatible on subcutaneous injection, and caused less inflammation than unmodified cross-linked HA.

Animals↗

PubMed2007

Photocrosslinkable hydrogel for myocyte cell culture and injection.

Conventional treatment options for myocardial infarction are limited by the inability of mature myocardium to regenerate after injury. Although functional improvements after injection of cells and growth factors have been demonstrated, the clinical utility of this procedure has been hampered by poor cell localization, low survival, and rapid clearance of injected growth factors. The main objective of this study was to evaluate the applicability of a hydrogel, based on photocrosslinkable chitosan and acryloyl-poly(ethylene glycol)-RGDS (Az-chitosan/Acr-PEG-RGD) for myocyte cell culture and myocardial injection. Chitosan was modified with photoreactive azidobenzoic acid and Acr-PEG-RGD was synthesized by reacting YRGDS with an equimolar amount of acryloyl-PEG-N-hydroxysuccinimide. For injection and encapsulation each polymer was dissolved in Di-H(2)O (pH 6.4), the solutions were mixed and crosslinked by UV application (4 mW/cm(2)). C2C12 myoblasts proliferated and differentiated on hydrogels containing 5 mM RGD but not on the pure photocrosslinked chitosan. In vitro, the crosslinked hydrogels retained 80% of encapsulated VEGF for 24 days. Live/dead staining of neonatal rat cardiomyocytes encapsulated into Az-chitosan/Acr-PEG-RGD hydrogels indicated high cell viability upon UV crosslinking. Ex vivo, we localized the hydrogel on the surface and in the ventricle wall of an adult rat heart by brief (2 min) UV light application.

Animals↗

PubMed2006

The prevention of peritoneal adhesions by in situ cross-linking hydrogels of hyaluronic acid and cellulose derivatives.

Post-operative peritoneal adhesions can cause pelvic pain, infertility, and potentially lethal bowel obstruction. We have designed and synthesized injectable hydrogels that are formed by mixing hydrazide-modified hyaluronic acid (HA) with aldehyde-modified versions of cellulose derivatives such as carboxymethylcellulose (CMC), hydroxypropylmethylcellulose (HPMC), and methylcellulose (MC). Gelation of these hydrogels occurred in less than 1 min, and had higher shear moduli than that of HA-HA gel (HAX). Hydrogels degraded in the presence of hyaluronidase in vitro, with HA-MC and HA-HPMC degrading more slowly than HAX and HA-CMC. The aldehyde-modified cellulose derivatives showed dose-dependent mild-to-moderate cytotoxicity to mesothelial cells and macrophages in vitro, but all were biocompatible in the murine peritoneum, causing no adhesions for 3 weeks. All the cellulose-derived gels showed efficacy in reducing the area of adhesion formation in a rabbit sidewall defect-bowel abrasion model.

Animals↗

PubMed2006

Peritoneal application of chitosan and UV-cross-linkable chitosan.

The suitability of chitosan and UV-cross-linkable chitosan for intraperitoneal use, for example as a barrier device for preventing peritoneal adhesions or for drug delivery, was examined. In vitro experiments using two major cell types present in the peritoneal cavity (mesothelial cells and peritoneal macrophages) revealed neither attractive interactions between cross-linked chitosan gels and the cells nor a proliferative effect. However, the same UV-cross-linked chitosan applied in the peritoneal cavity of rabbits caused a granulomatous reaction with adhesion formation within two weeks in all animals, which persisted up to 4 weeks after exposure. Unmodified chitosan also caused adhesions, while UV irradiation did not. UV-cross-linkable chitosan induced significant elevations in MIP-2 and TNF-alpha from peritoneal macrophages, suggesting that soluble mediators could play a role in inducing adhesion formation. These results reinforce the view that the predictive value of in vitro cytotoxicity assays in matters of biocompatibility may not be sufficient, and suggest that other assays such as cytokine levels may be of value in predicting outcomes in situations involving multiple cell types (i.e. in vivo).

Animals↗

PubMed2006

Micromolding of photocrosslinkable chitosan hydrogel for spheroid microarray and co-cultures.

Bioengineering approaches, such as co-cultures of multiple cell types, that aim to mimic the physiological microenvironment may be beneficial for optimizing cell function and for engineering tissues in vitro. This study describes a novel method for preparing a spheroid microarray on microfabricated hydrogels, alone or in co-cultures. Photocrosslinkable chitosan was synthesized and utilized for fabricating hydrogel microstructures through a micromolding process. The chitosan surface was initially cell repellent but became increasingly cell adhesive over time. By using this unique property of chitosan hydrogels, it was possible to generate patterned co-cultures of spheroids and support cells. In this scheme, cells were initially microarrayed within low shear stress regions of microwells. Human hepatoblastoma cells, Hep G2, seeded in these wells formed spheroids with controlled sizes and shapes and stably secreted albumin during the culture period. The change of cell adhesive properties in the chitosan surface facilitated the adhesion and growth of a second cell type, NIH-3T3 fibroblast, and therefore enabled co-cultures of hepatocyte spheroids and fibroblast monolayers. This co-culture system could be a useful platform for studying heterotypic cell-cell interactions, for drug screening, and for developing implantable bioartificial organs.

Animals↗

PubMed2006

In situ cross-linkable hyaluronic acid hydrogels prevent post-operative abdominal adhesions in a rabbit model.

We studied the efficacy of an in situ cross-linked hyaluronic acid hydrogel (HAX) in preventing post-surgical peritoneal adhesions, using a rabbit sidewall defect-cecum abrasion model. Two cross-linkable precursors were prepared by modifying hyaluronic acid with adipic dihydrazide and aldehyde, respectively. The hydrogel precursors cross-linked to form a flexible hydrogel upon mixing. The hydrogel was biodegradable and provided a durable physical barrier, which was highly effective in reducing the formation of post-operative adhesions. Ten out of 12 animals in the untreated control group developed fibrous adhesions requiring sharp dissection, while only 2 out of 8 animals treated with HAX gels showed such adhesions, and those occurred in locations that were not covered by the hydrogel. We also studied means by which gel degradation time can be modulated by varying the precursor concentration and molecular weight.

Abdomen↗

PubMed2006

A photolithographic method to create cellular micropatterns.

Here we describe a simple and rapid system for creation of patterned cell culture substrates. This technique is based on (1) printing a mask on a standard overhead transparency, (2) coating a thin layer of a photocrosslinkable chitosan on a slide, (3) exposing the slide and mask to ultraviolet (UV) light, and (4) rinsing the uncrosslinked polymer to expose the underlying cell-repellent patterns. Photocross-linkable chitosan does not require photoinitiators, it is non-toxic and forms flexible, biocompatible hydrogel upon short ( approximately min) UV exposure. Patterns of various shapes (lanes, squares, triangles, circles) were created on two surfaces commonly used for cell culture: glass and tissue culture polystyrene. The pattern size could be varied with a mum resolution using a single mask and varying UV exposure time. Cardiac fibroblasts formed stable patterns for up to 18 days in culture. Cardiomyocytes, patterned in lanes 68-99 microm wide, exhibited expression of cardiac Troponin I, well developed contractile apparatus and they contracted synchronously in response to electrical field stimulation. Osteoblasts (SAOS-2) localized in the exposed glass regions (squares, triangles, or circles; 0.063-0.5mm(2)). They proliferated to confluence in 5 days, expressed alkaline phosphatase and produced a mineralized matrix.

Animals↗

PubMed2006

Biodegradable polymeric microspheres and nanospheres for drug delivery in the peritoneum.

Drug delivery to the peritoneum is hampered by rapid clearance, and could be improved by application of controlled release technology. We investigated the suitability for peritoneal use of micro- and nanoparticles of poly(lactic-co-glycolic) acid (PLGA), a biodegradable polymer with generally excellent biocompatibility commonly used for controlled drug release. We injected 90 kDa PLGA microparticles, 5-250 microm in diameter, into the murine peritoneum, in dosages of 10-100 mg (n=3-5 per group). We found a high incidence of polymeric residue and adhesions 2 weeks after injection (e.g., 50 mg of 5-microm microparticles caused adhesions in 83% of animals). Histology revealed chronic inflammation, with foreign body giant cells prominent with particles>5 microm in diameter. Five micrometer microspheres made from 54, 57, and 10 kDa PLGA (gamma irradiated) caused fewer adhesions (16.7%) with a similar incidence of residue. Nanoparticles (265 nm) of 90 kDa PLGA also caused much fewer adhesions (6.3% of animals), possibly because they were cleared from the peritoneum within 2 days, and sequestered in the spleen and liver, where foamy macrophages were noted. The effect of sterilization technique on the incidence of adhesion formation is also studied.

Animals↗

PubMed2006

Hyaluronic acid-based microgels and microgel networks for vocal fold regeneration.

Vocal fold scarring disrupts the viscoelastic properties of the lamina propria that are critical for normal phonation. There is a clinical need for the development of advanced biomaterials that approximate the mechanical properties of the lamina propria for in vivo vocal fold regeneration. We have developed hyaluronic acid (HA)-based microgels and cross-linked microgel networks with tunable degradation and mechanical properties. HA microgels were prepared by cross-linking HA derivatives carrying hydrazide (HAADH) and aldehyde (HAALD) functionalities within the inverse emulsion droplets. Alternatively, poly(ethylene glycol) dialdehyde (PEGDiALD) was employed in place of HAALD. Microgels based on HAADH/HAALD are more resistant to enzymatic degradation than those generated from HAADH/PEGDiALD. In vitro cytotoxicity studies using vocal fold fibroblasts indicate that microgels synthesized from HAADH/HAALD are essentially nontoxic, whereas microgels derived from HAADH/PEGDiALD exhibit certain adverse effects on the cultured cells at high concentration (> or =2 mg/mL). These microgels exhibit residual functional groups that can be used as reactive handles for covalent conjugation of therapeutic molecules. The presence of residual functional groups also allows for subsequent cross-linking of the microgels with other reactive polymers, giving rise to doubly cross-linked networks (DXNs) with tunable viscoelasticity. Mechanical measurements using a torsional wave apparatus indicate that HA-based DXNs exhibit elastic moduli that are similar to those of vocal fold lamina propria at frequencies close to the range of human phonation. These HA-based microgel systems are promising candidates for the treatment of vocal fold scarring, not just as biocompatible filler materials, but as smart entities that can repair focal defects, smooth the vocal fold margin, and potentially soften and dissolve scar tissue.

Aldehydes↗

PubMed2005

Complex coacervates for thermally sensitive controlled release of flavor compounds.

To improve the appeal of frozen baked foods upon heating, we have encapsulated flavor oil in complex coacervate microcapsules using gelatin and gum Arabic. Variation of polyion concentrations and homogenization rate affected particle morphology, size distribution, and oil release upon heating. Release of the oil from formulations was determined by a simple spectroscopic method based on separation of oil labeled with a lipophilic dye from unaffected particles. When heated to 100 degrees C or higher, univesicular microcapsules (prepared with a lower homogenization rate) released almost all of the encapsulated oil, while multivesicular microcapsules (produced by high homogenization rates) resulted had lesser degrees of release. The oil remained encapsulated during 4 weeks of storage at 4 and -20 degrees C (freezing and thawing) but was released by exposure to 100 mM NaCl at room temperature. When particles were cooled after releasing their oil content, the oil was re-encapsulated.

Capsules↗

PubMed2004

A new microencapsulation method using an ultrasonic atomizer based on interfacial solvent exchange.

Reservoir-type microcapsules were produced in a mild and highly efficient manner using a coaxial ultrasonic atomizer. To understand the microencapsulation mechanism, the atomizer was operated in different modes. The results suggested the reservoir-type microcapsules were formed by midair collision of the microdrops of the two component liquids consisting of a polymer solution and an aqueous solution. The encapsulation efficiency and the distribution of the microdrops captured in midair were dependent on the ratio of the flow rates of the two liquids, which suggested that the collision involved multiple microdrops. This method allowed lysozyme to be encapsulated without loss of functional integrity and to be released with near zero-order kinetics for over 50 days. The ultrasonic atomizer provided a new method of preparing reservoir-type microcapsules.

Anti-Infective Agents↗

PubMed2004

Characterization of reservoir-type microcapsules made by the solvent exchange method.

The purpose of this research was to characterize and optimize the properties of microcapsules produced by the solvent exchange method, a new microencapsulation technique. Reservoir-type microcapsules containing lysozyme as a model protein were produced using a coaxial ultrasonic atomizer under various formulation and instrument settings, and characterized with respect to in vitro release kinetics and stability of the encapsulated protein. The solvent exchange method could encapsulate protein drugs with high efficiency under an optimized condition and was mild enough to preserve the integrity of the encapsulated lysozyme during the process. In vitro release studies showed that the microcapsules could release proteins in a controllable manner. The solvent exchange method is a mild and simple microencapsulation method that could encapsulate lysozyme, maintaining its functional integrity.

Capsules↗

PubMed2004

Control of encapsulation efficiency and initial burst in polymeric microparticle systems.

Initial burst is one of the major challenges in protein-encapsulated microparticle systems. Since protein release during the initial stage depends mostly on the diffusional escape of the protein, major approaches to prevent the initial burst have focused on efficient encapsulation of the protein within the microparticles. For this reason, control of encapsulation efficiency and the extent of initial burst are based on common formulation parameters. The present article provides a literature review of the formulation parameters that are known to influence the two properties in the emulsion-solvent evaporation/extraction method. Physical and chemical properties of encapsulating polymers, solvent systems, polymer-drug interactions, and properties of the continuous phase are some of the influential variables. Most parameters affect encapsulation efficiency and initial burst by modifying solidification rate of the dispersed phase. In order to prevent many unfavorable events such as pore formation, drug loss, and drug migration that occur while the dispersed phase is in the semi-solid state, it is important to understand and optimize these variables.

Capsules↗

PubMed2004

Solvent exchange method: a novel microencapsulation technique using dual microdispensers.

PURPOSE: A new microencapsulation method called the "solvent exchange method" was developed using a dual microdispenser system. The objective of this research is to demonstrate the new method and understand how the microcapsule size is controlled by different instrumental parameters. METHOD: The solvent exchange method was carried out using a dual microdispenser system consisting of two ink-jet nozzles. Reservoir-type microcapsules were generated by collision of microdrops of an aqueous and a polymer solution and subsequent formation of polymer films at the interface between the two solutions. The prepared microcapsules were characterized by microscopic methods. RESULTS: The ink-jet nozzles produced drops of different sizes with high accuracy according to orifice size of a nozzle, flow rate of the jetted solutions, and forcing frequency of the piezoelectric transducers. In an individual microcapsule, an aqueous core was surrounded by a thin polymer membrane; thus, the size of the collected microcapsules was equivalent to that of single drops. CONCLUSIONS: The solvent exchange method based on a dual microdispenser system produces reservoir-type microcapsules in a homogeneous and predictable manner. Given the unique geometry of the microcapsules and mildness of the encapsulation process, this method is expected to provide a useful alternative to existing techniques in protein microencapsulation.

Capsules↗

PubMed2003

A new process for making reservoir-type microcapsules using ink-jet technology and interfacial phase separation.

A new microencapsulation technique that utilizes interfacial mass transfer between two mutually soluble liquids has been developed. The technique is based on formation of a solid polymer film at the interface of a solution of a water-insoluble polymer and an aqueous solution, resulting from the mutual mass transfer of solvents (i.e., solvent exchange). Reservoir-type microcapsules were prepared by inducing this phenomenon to occur on the surface of an aqueous droplet. One method of implementation employed a dual microdispenser system that consisted of two ink-jet nozzles. The nozzles, producing droplets of a polymer solution and an aqueous drug solution, respectively, were aligned to allow collision of pairs of the droplets. The collision resulted in spreading of the polymer solution on the aqueous droplet and simultaneous solvent exchange, to form a polymeric membrane around the aqueous droplet. The formation of the polymer membrane depended largely on the favorable spreading of the polymer solution on the aqueous droplets and fast solvent exchange, and required judicious selection of the organic solvent. Simple and fast screening methods were developed for selection of a proper solvent. Ethyl acetate was chosen as one of the most desirable solvents through the screening procedures. Ethyl acetate and the dual microdispenser system were used to form microcapsules that were subsequently examined by microscopic methods to demonstrate their unique geometry.

Acetates↗

PubMedDate not supplied

Reservoir-type microcapsules prepared by the solvent exchange method: effect of formulation parameters on microencapsulation of lysozyme.

A new microencapsulation technique based on the solvent exchange method was implemented using an ultrasonic atomizer system to encapsulate a protein drug in mild conditions. The reservoir-type microcapsules encapsulating lysozyme as a model protein were prepared by inducing collisions between the aqueous droplets containing lysozyme and the droplets of organic solvent with dissolved poly(lactic acid-co-glycolic acid) (PLGA). The main focus of the study was to examine formulation variables on the size and the encapsulation efficiency of the formed microcapsules. The formulation variables examined were concentrations of mannose in the aqueous cores, NaCl in the aqueous collection medium, and PLGA in organic solvent. The mean diameter of the microcapsules ranged from 40 microm to 100 microm. Smaller microcapsules showed lower encapsulation efficiencies. The resulting microcapsules released native lysozyme in a sustained manner, and the release rate was dependent on the formulation conditions, such as the concentration and molecular weight of the polymer used. The solvent exchange method does not induce lysozyme aggregation and loss of its biological activity. The solvent exchange method, implemented by the ultrasonic atomizer system, provides an effective tool to prepare reservoir-type microcapsules for delivering proteins.

Capsules↗