Biomedical subjects
Publications and source records attributed to Yoshio Inoue.
Reactions of alkynes with arenes proceeded in the presence of dinuclear palladium complexes and trialkylboranes to yield alkyne hydroarylation products with high stereoselectivity. In the reactions of monosubstituted benzenes, meta and para products were formed in statistical ratios, while no ortho isomers were detected.
Various allylic alcohols reacted with n-butyl acrylate in the presence of p-toluenesulfonic anhydride and palladium catalysts to yield the corresponding n-butyl 2,5-dienoates with high regioselectivity.
Various alkynes reacted with allyl tosylates in the presence of palladium catalysts, giving polysubstituted benzenes with good to high regioselectivity. Pentasubstituted and trisubstituted benzenes were readily prepared by reaction of internal alkynes and terminal alkynes, respectively. The combination of allyl alcohols and p-toluenesulfonic anhydride could be utilized in place of isolated allyl tosylates. The cyclization of diynes with allyl tosylate afforded bicyclic compounds containing an aromatic ring.
It is known that the absorption maximum of halorhodopsin is red shifted by 10 nm with the uptake of a chloride ion Cl(-). According to the X-ray structure, the ion is located at the position of the counterion of the chromophore, protonated retinal Schiff base. Thus, the direction of the observed spectral change is opposite to that expected from the pi-electron redistribution (an increase in the bond alternation) induced by the counterion. The physical origin of this abnormal shift is never explained in terms of any simple chemical analogues. We successfully explain this phenomenon by a QM/MM type of excitation energy calculation. The three-dimensional structure of the protein is explicitly taken into account using the X-ray structure. We reveal that the electronic polarization of the protein environment plays an essential role in tuning the absorption maximum of halorhodopsin.
Highly enantioselective 1,4-addition of organosiloxanes to alpha,beta-unsaturated carbonyl compounds was found to be catalyzed by a chiral rhodium complex generated from [Rh(cod)(MeCN)(2)]BF(4) and (S)-BINAP. Both (E)- and (Z)-1-alkenyl groups as well as aryl groups can be introduced enantioselectively into the beta-position of a variety of ketones, esters, and amides. [reaction--see text]
The objective of this study was to determine the efficacy of low-dose acetazolamide (125 mg twice daily) for the prevention of acute mountain sickness (AMS). The design was a prospective, double-blind, randomized, placebo-controlled trial in the Mt. Everest region of Nepal between Pheriche (4243 m), the study enrollment site, and Lobuje (4937 m), the study endpoint. The participants were 197 healthy male and female trekkers of diverse background, and they were evaluated with the Lake Louise Acute Mountain Sickness Scoring System and pulse oximetry. The main outcome measures were incidence and severity of AMS as judged by the Lake Louise Questionnaire score at Lobuje. Of the 197 participants enrolled, 155 returned their data sheets at Lobuje. In the treatment group there was a statistically significant reduction in incidence of AMS (placebo group, 24.7%, 20 out of 81 subjects; acetazolamide group, 12.2%, 9 out of 74 subjects). Prophylaxis with acetazolamide conferred a 50.6% relative risk reduction, and the number needed to treat in order to prevent one instance of AMS was 8. Of those with AMS, 30% in the placebo group (6 of 20) versus 0% in the acetazolamide group (0 of 9) experienced a more severe degree of AMS as defined by a Lake Louise Questionnaire score of 5 or greater (p = 0.14). Secondary outcome measures associated with statistically significant findings favoring the treatment group included decrease in headache and a greater increase in final oxygen saturation at Lobuje. We concluded that acetazolamide 125 mg twice daily was effective in decreasing the incidence of AMS in this Himalayan trekking population.
The availability of G-CSF increases the safety margin of chemotherapy use, especially in the management of infection. This in turn makes administration of a more intense regimen of chemotherapy possible. However, this improvement in neutropenic management could lead to an undesirable concurrent rise in thrombocytopenia risk due to the higher dose of chemotherapy administered. Although mortality from thrombocytopenia is generally quite rare, transfusions of platelets are often expensive and can be associated with side effects such as fever, hypersensitivity reaction, and occasionally infection. Therefore, transfusion of platelets should be performed when it is truly indicated. In general, the threshold for platelet transfusion is accepted as being when the platelet count drops below 10,000/microliter, unless there is an obvious bleeding lesion or other coagulation abnormality, such as DIC being identified in the patients. On the other hand, thrombotic microangiopathy (TMA) can also occur as a rare complication of the malignancy itself or from the associated cancer chemotherapy. The major features of TMA are thrombocytopenia and marked increases of destroyed erythrocytes and LDH in peripheral blood. Despite a low incidence, its high mortality rate makes it important for all physicians caring for cancer patients to be aware of it, especially in view of the ready availability of successful treatments (e.g., plasma exchanges). Early diagnosis of TMA in patients receiving chemotherapy requires special attention because some characteristics of TMA are often masked by common side-effects of chemotherapy such as bone marrow suppression. Since delay in initiation of plasma exchange could result in higher mortality, urgent hematology consultation should be obtained if TMA is ever suspected.
Form II is a kind of metastable crystalline form of trehalose anhydrate, and it is easily converted to the dihydrate crystal by absorbing water in moist atmosphere at room temperature (Akao et al., Carbohydr. Res. 2001, 334, 233-241). It can be utilized as an edible and nontoxic desiccant, and thus its efficient production from the dihydrate is significant from a viewpoint of industrial applications. In this study, we attempt to extract crystal water from the dihydrate using supercritical CO(2). We examine the dependence of extraction efficiency on the extraction time, the temperature and pressure of the fluid. Then, FTIR measurements are carried out to detect the extracted water and to identify the polymorphic phase of the sugar sample after the extraction treatment. In particular, the so-called first derivative euclidean distance analysis for IR spectra is shown to be quite useful for the structural identification. Consequently, we demonstrate that form II is produced from the dihydrate through supercritical CO(2) fluid extraction if appropriate temperature and pressure conditions (around 80 degrees C and 20 MPa) are maintained.
[reaction: see text] The ortho position of the aromatic ring of imino group substituted aromatic compounds is directly arylated and alkenylated with organic halides in the presence of a catalytic amount of a ruthenium(II)-phosphine complex.
Poly-3-hydroxybutyrate (PHB) granules of Zoogloea ramigera I-16-M contained two major PHB granule-associated proteins (PGA12 and PGA16) as revealed by sodium dodecyl sulfate-polyacrylamide gel elecrophoresis. N-terminal amino acid sequences of these proteins were determined. The genes encoding these proteins were cloned and sequenced. The structural genes of PGA12 and PGA16 were 351 and 447 bp long, which encode polypeptides with deduced molecular masses of 12.3 and 16.0 kDa, respectively. PGA12 and PGA16 were expressed in Escherichia coli. PHB granules were isolated from cells of recombinant strains of E. coli JM109, which harbored and expressed the PHB-synthetic genes of Ralstonia eutropha H16 and PGA12 or PGA16. These PHB granules contained PGA12 or PGA16 as a major protein. The presence of pga12 or pga16 did not affect the amount of PHB synthesized in E. coli. PGA12 and PGA16 bound to crystalline and amorphous PHB granules.
[reaction: see text] A novel, additive-free, and clean conjugate addition reaction of organosiloxanes to alpha,beta-unsaturated carbonyl compounds catalyzed by a cationic rhodium complex in water-containing solvent has been developed. A plausible reaction mechanism involving the additive-free transmetalation step between the rhodium complex and the silicon reagent is proposed.
Poly(L-lactide) (PLLA) thin film with 100 nm thickness was crystallized at 160 degreesC for 20 min from the melt obtained at 220 degreesC. Hexagonal crystals with three types of growth (derivative growth lamellae, overgrowth multistacked lamellae, and undergrowth multistacked lamellae) were simultaneously observed by atomic force microscopy (AFM). These phenomena are due to the differences of the formative points of secondary crystal nuclei against the basal lamella. Enzymatic degradation of PLLA thin film revealed two types of amorphous regions. These regions were identified as the free amorphous region around the crystals and the restricted amorphous region between the crystal and glass substrate. In situ observation of thermal behavior of lamellar crystals was performed to understand the correlation between the chain folding and stability of the crystal by using temperature-controlled AFM. The morphology of the sectors with [100] growth plane had changed to a comblike morphology despite the fact that the [110] growth plane remained unchanged, suggesting that the stability of the chain folding and the chain-packing state affected the thermal behavior.
Enzymatic degradability has been investigated for a series of bacterial poly(3-hydroxybutyrate-co-3-hydroxypropionate)s (P(3HB-co-3HP)s) with 3-hydroxypropionate (3HP) unit contents from 11 to 86 mol % as well as poly(3-hydroxybutyrate) (P(3HB)) and chemosynthesized poly(3-hydroxypropionate) (P(3HP)). The behavior of degradation by two types of extracellular poly(3-hydroxyalkanoate) (PHA) depolymerases purified from Ralstonia pikettii T1 and Acidovorax Sp. TP4, defined respectively as PHA depolymerase types I and II according to the position of the lipase box in the catalytic domain, were compared in relation to the thermal properties and crystalline structures of the PHA samples elucidated by differential scanning calorimetry and wide-angle X-ray diffraction. The degradation products were characterized by high-performance liquid chromatography and one- (1D) and two-dimension (2D) (1)H NMR spectroscopy. It was found that the PHA depolymerase of Acidovorax Sp. TP4 showed degradation behavior different from that shown by depolymerase of R. pikettii T1. PHA depolymerase from Acidovorax Sp. TP4 degraded the P(3HB-co-3HP) films with lower crystallinity in higher rates than those with higher crystallinity, no matter what kinds of crystalline structures they formed. In contrast, PHA depolymerase from R. pikettii T1 degraded P(3HB-co-3HP) films forming P(3HB) crystalline structure in higher rates than those forming P(3HP)s. The increase in amorphous nature of the P(3HB-co-3HP) films with P(3HB)-homopolymer-like crystalline structure increases and then decreases the rate of degradation by depolymerase from R. pikettii T1. The 3-hydroxybutyrate (3HB) monomer was produced as a major product by the hydrolysis of P(3HB) film by PHA depolymerase from Acidovorax Sp. TP4. The P(3HB-co-3HP) films could be degraded into 3HB and 3-hydroxypropionate (3HP) monomer at last, indicating that the catalytic domain of the enzyme recognized at least two monomeric units as substrates. While the PHA depolymerase from R. pikettii T1 hydrolyzed P(3HB) film into 3HB dimer as a major product, and the catalytic domain recognized at least three monomeric units. The degradation behavior of P(3HB-co-3HP) films by the PHA depolymerase of Acidovorax Sp. TP4 could be distinguished from that by the depolymerase of R. pikettii T1.
The miscibility and phase behavior of two stereoisomer forms of poly(lactide) (PLA: poly (L-lactide) (PLLA) and poly(DL-lactide) (PDLLA)) blends with poly(epsilon-caprolactone)-b-poly(ethylene glycol) (PCL-b-PEG) and PCL-b-monomethoxy-PEG (PCL-b-MPEG) block copolymers have been investigated by differential scanning calorimetry (DSC). The DSC thermal behavior of both the blend systems revealed that PLA is miscible with the PEG segment phase of PCL-b-(M)PEG but is still immiscible with its PCL segment phase although PCL was block-copolymerized with PEG. On the basis of these results, PCL-b-PEG was added as a compatibilizer to PLA/PCL binary blends. The improvement in mechanical properties of PLA/PCL blends was achieved as anticipated upon the addition of PCL-b-PEG. In addition, atomic force microscopy (AFM) measurements have been performed in order to study the compositional synergism to be observed in mechanical tests. AFM observations of the morphological dependency on blend composition indicate that PLA/PCL blends are immiscible but compatible to some extent and that synergism of compatibilizing may be maximized in the compositional blend ratio before apparent phase separation and coarsening.
The enzymatic degradability of chemosynthesized atactic poly([R,S]-3-hydroxybutyrate) [a-P(3HB)] by two types of extracellular poly(3-hydroxyalkanoate) (PHA) depolymerases purified from Ralstonia pickettii T1 (PhaZ(ral)) and Acidovorax Sp. TP4 (PhaZ(aci)), defined respectively as PHA depolymerase types I and II according to the position of the lipase box in the catalytic domain, were studied. The enzymatic degradation of a-P(3HB) by PhaZ(aci) depolymerase was confirmed from the results of weight loss and the scanning electron micrographs. The degradation products were characterized by one- and two-dimension (1)H NMR spectroscopy. It was found that a-P(3HB) could be degraded into monomer, dimer, and trimer by PhaZ(aci) depolymerase at temperatures ranging from 4 to 20 degrees C, while a-P(3HB) could hardly be hydrolyzed by PhaZ(ral) depolymerase in the same temperature range. These results suggested that the chemosynthesized a-P(3HB) could be degraded in the pure state by natural PHA depolymerase.
The comonomer-unit compositional distributions have been investigated for bacterial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HH)] samples with 3HH unit content of 13.8, 18.0, 22.0, and 54.0 mol %. They were comonomer compositionally fractionated using chloroform/n-heptane mixed solvent at ambient temperature. The fractionation of P(3HB-co-18.0 mol %3HH) and P(3HB-co-22.0 mol % 3HH), which could not be carried out effectively at room temperature, were refractionated at 70 degrees C in the mixed solvent. Fractions with different 3HH unit content in a wide range (from 4.4 to 80.7 mol %) were obtained. By use of these fractions with narrow compositional distribution, the comonomer composition dependence of thermal properties was investigated by differential scanning calorimetry. The melting point (T(m)) and heat of fusion (DeltaH) decreased as the 3HH unit content increased in the range of low 3HH content (<40 mol %), while they increased as the 3HH unit content increased in the high 3HH content range (>70 mol %). The minimum T(m) and DeltaH values were found to exist at 3HH unit content of about 60 mol %. The glass transition temperature (T(g)) decreased linearly with the increase of 3HH unit content. The values of T(m), DeltaH, and T(g) of P(3HB-co-3HH)s were compared with those of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3-hydroxybutyrate-co-3-hydroxypropionate), and poly(3-hydroxybutyrate-co-4-hydroxybutyrate), and the effects of comonomer types on the thermal properties were revealed.
The change in the surface structure of poly[(R)-3-hydroxybutyrate] [PHB] films upon the enzymatic hydrolysis was analyzed by attenuated total reflection infrared [ATR/IR] spectrometry. As enzymes, PHB depolymerases isolated from Ralstonia pickettii T1 and Pseudomonas stutzeri were used. By curve decomposition of the carbonyl stretching band of ATR/IR spectra, the change in the surface crystallinity of PHB films by exposure to buffer containing 0, 1, and 4 microg of PHB depolymerases was estimated. It has been widely believed that the enzymatic hydrolysis first occurs in the amorphous phase, followed by the degradation in the crystalline phase, and extracellular PHB depolymerase can degrade only polymer chains in the surface layer of the film. Therefore, the surface crystallinity had been expected to increase upon the enzymatic degradation. However, the results were contrary to this expectation. The surface crystallinity was decreased by the enzymatic attack. Because ATR/IR spectrometry is sensitive to a small change in molecular structure of the sample surface, the decrease in the crystallinity shown by ATR/IR experiments probably does not indicate the complete loss of regularity of the crystalline phase. Because the chains at crystalline surface are more mobile than those inside the crystals, the C=O band for crystalline surface may appear at a position similar to those of the amorphous or interfacial phase in ATR/IR spectra of PHB. Only the chains inside the crystals may contribute to the C=O band of the crystalline phase. Thus, we rather suppose that the decrease in the crystalline peak of the ATR/IR spectra reflects the change in chain mobility or the increase of crystalline surface area by cracking of lamellas at the surface layers of PHB films or both.
Explore the source record for details and available documents.