Biomedical subjects

Youn Cheol Kim

Publications and source records attributed to Youn Cheol Kim.

2 recordsLinked to original sources

PubMed2006

Commercial scale fabrication method for fabricating a gradient refractive-index rod: Overcoming volume shrinkage and chemical restrictions.

We report a fabrication method for a gradient refractive-index polymeric object from a binary comonomer system, regardless of the monomers' reactivity ratio and the molar volume criteria of gradient refractive-index development. To fabricate a large gradient refractive-index rod consisting of a methyl methacrylate and 2,2,3,3-tetrafluoropropyl methacrylate comonomer pair that has not been used for fabrication of a copolymer gradient refractive-index rod by previous conventional methods because of chemical restrictions in molar volume and reactivity ratio difference, we use the so-called successive UV polymerization in a controlled radial volume in conjunction with an automatic refill reactor. Simultaneously and automatically, the volume shrinkage problem, an inevitable shortcoming for the fabrication of a large polymeric object in a commercial production scale, is overcome and exploited. The theoretical features of the refractive-index profile generation of this method are also compared with those of conventional methods for which the chemical restrictions of monomers are crucial for the shape of a refractive-index profile.

Journal Article↗

PubMed2004

Monoolein cubic phases containing hydrogen peroxide.

Monoolein (MO) cubic phases were prepared by hydrating MO using distilled water or 12wt.% H(2)O(2) solution so that the content of aqueous phase in the cubic phase is 30wt.%. The thermal transition of the isotropic cubic phase to reversed hexagonal phase was observed on a polarizing photomicroscope and the transition temperature was found to be around 65 degrees C on a differential scanning calorimeter (DSC). Small-angle X-ray scattering (SAXS) patterns indicated the cubic phases had diamond surfaces. The cubic phase released H(2)O(2) into an aqueous phase in a saturation manner so that approx. 50% of total loaded H(2)O(2) release in the first 10 h and thereafter relatively slow was observed over 40 h. The cubic phase was stable at 45 degrees C for 56 days before it broke down into an oily phase and an aqueous phase in 70 days. According to (1)H NMR spectrum, glycerol moiety and -CH(2)=CH(2)- of the oily phase were detected less in number than those of intact MO. Therefore, the hydrolysis and the oxidation of MO would be responsible for the breakdown of the cubic phase. The tensile adhesive forces of the cubic phases were higher than a skin-adhesive patch prepared using polyacrylate. The cubic phase containing H(2)O(2) could be used as a topical disinfected gel for a wounded skin.

Calorimetry, Differential Scanning↗