PubMed Health⌕ Search

Biomedical subjects

Yu-Chih Lin

Publications and source records attributed to Yu-Chih Lin.

10 recordsLinked to original sources

Activation of endothelial cells by antiphospholipid antibodies--a possible mechanism triggering thrombosis in patients with antiphospholipid syndrome.

Antiphospholipid syndrome (APS) is an antibody-mediated hypercoagulable state characterized by recurrent venous and arterial thromboembolic events. The presence of serum antibodies are collectively termed as antiphospholipid antibodies (aPL) and is the hallmark of the disease. Interest in the pathogenesis has mostly been focused on the blood coagulation factor. However, endothelial cells might play an important role. When stimulated, cell membrane would flip to expose negatively charged phospholipids and activation markers such as adhesive molecules may appear. We consider that these changes may play an important role in the initiation of the thrombotic process when endothelial cells encounter a PL. In this study, we incubated human umbilical vein endothelial cells (HUVECs) with IgG isolated from patients with APS and found that the HUVECs were activated by the expression of negatively charged phospholipids, as shown by high annexin V binding and negative propidium iodide staining and by an increase in the level of intracellular cell adhesion molecule-1 on the cell surface. The above findings indicate that endothelial cells can be activated on exposure to aPL and trigger the thrombotic event.

Adult↗

Malignant thymoma associated with mixed connective tissue disease: a case report.

Many autoimmune diseases have been reported to be associated with malignancy. Mixed connective tissue disease (MCTD), however, has rarely been associated with malignancy. Thymoma is one of the neoplasms often reported to be related to various immunological disorders. Among the types of thymoma defined by WHO, malignant thymoma (thymoma type C) is the one least reported to be associated with autoimmune disease. Here, we report a case of malignant thymoma with concurrent MCTD, which manifested with acrosclerosis, Raynaud's phenomenon, arthritis (synovitis), and a high titer of anti-ribonucleoprotein antibody.

Female↗

Control of VOCs emissions by condenser pre-treatment in a semiconductor fab.

The performance of a modified design of local condensers to pre-treat a variety of volatile organic compounds (VOCs) emitted from the stripping process of a semiconductor fab was tested in this study. The reaction temperature of the condensers was controlled at around 10 degrees C, it is relatively higher than the traditional condenser reaction temperature. Both VOCs and water vapors were condensed and formed liquid films. This resulted in an enhancement of the VOCs removals, especially for VOCs of high boiling points or solubility. This can help to prevent the follow up zeolite concentrator from damage. The performance of the integrated system of condenser/zeolite concentrator could, therefore, remain highly efficient for a longer operation time. Its annualized cost would also be lower than installing the zeolite concentrator only.

Air Pollution↗

Detection of IL-20 and its receptors on psoriatic skin.

The aim of this study was to investigate the expression of interleukin-20 (IL-20) and its receptors on psoriatic skin by immunohistochemical analysis and to evaluate the correlation of CD8-positive T lymphocytes with epidermal proliferation. Overexpression of IL-20 and its receptors was detected in the keratinocytes of the lesional skin of psoriasis and spongiotic dermatitis. The expression pattern of IL-20 spreads throughout the whole layer of epidermis, while IL-19 was expressed in up to three or four layers suprabasally. The serum level of IL-20 in psoriatic patients was significantly lower than that in healthy controls. IL-20 upregulated KGF transcripts on CD8-positive T cells. We hypothesize that overexpression of IL-20 is correlated with keratinocyte proliferation that acts through their receptor complex expressed by keratinocytes themselves. Furthermore, IL-20 can stimulate CD8-positive lymphocytes to produce KGF, which may contribute to sustaining the hyperproliferative status of the keratinocytes.

CD8-Positive T-Lymphocytes↗

Applying hexagonal nanostructured zeolite particles for acetone removal.

This study examines the performance of a new adsorbent, hexagonal nanostructured zeolite particles (HNZP) for acetone adsorption and compares the results with that of commercial mobil synthetic zeolite-5 (ZSM-5) type zeolite. The HNZP is a pure siliceous adsorbent with different values of pore diameter and surface area being adjustable by the manufacturing condition. The results indicate that a slight increase in the average pore diameter (d) of HNZP from 2 to 2.5 nm leads to an increase in the acetone adsorption capacity, although its surface area is decreased, in which case (d = 2.5 nm) the adsorption capacity of fresh HNZP is better than that of ZSM-5 zeolite. Even for the fresh HNZP (d = 2 nm) of which the adsorption capacity is less than that of the ZSM-5 zeolite at relative humidity (RH) of 0%, its adsorption capacity is not deteriorated after repeated regeneration, but the adsorption capacity of regenerated ZSM-5 zeolite decays markedly. Thus, after only one regeneration, the adsorption capacity of HNZP (d = 2 nm) becomes better than that of the ZSM-5 zeolite. The decrease in the adsorption capacity of regenerated ZSM-5 zeolite might be because of its aluminum content that catalyzes the acetone into coke and, thus, blocks the adsorption sites. Furthermore, result on the moisture effect shows that because the pure siliceous HNZP was more hydrophobic than the ZSM-5 zeolite, the acetone adsorption efficiency of fresh HNZP (d = 2 nm) is better than that of ZSM-5 zeolite at RH = 50%.

Acetone↗

Theoretical, numerical, and experimental investigation on resonant vibrations of piezoceramic annular disks.

In this study, vibration characteristics of thin piezoceramic annular disks with stress-free boundary conditions are investigated by theoretical analysis, numerical simulation, and experimental measurement. The nonaxisymmetric, out-of-plane (transverse), and axisymmetric in-plane (tangential and radial extensional) vibration modes are discussed in detail in terms of resonant frequencies, mode shapes, and electrical currents. Two optical techniques, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV), as well as the electrical impedance measurement are used to validate the analytical results. Both theoretical and experimental results indicate that the transverse and tangential vibration modes cannot be determined by the impedance analysis; hence, only resonant frequencies of extensional vibration modes are presented from the impedance analyzer. The LDV system is used to measure the resonant frequencies of transverse vibrations. However, both the transverse and extensional vibration modes and resonant frequencies of piezoceramic annular disks are obtained by the AF-ESPI method, and the interferometric fringes are produced instantly by a video recording system. Numerical results obtained by finite-element calculations are compared with those from theoretical analysis and experimental measurements. It is shown that the theoretical predictions of resonant frequencies and the corresponding mode shapes agree well with the experimental results. Good agreement between the predicted and measured electrical impedance also is found. The dependence of resonant frequencies and dynamic electromechanical coupling coefficients on the inner-to-outer radius ratio also is analyzed and discussed in this study.

Journal Article↗

Theoretical analysis and experimental measurement for resonant vibration of piezoceramic circular plates.

Based on the electroelastic theory for piezoelectric plates, the vibration characteristics of piezoceramic disks with free-boundary conditions are investigated in this work by theoretical analysis, numerical simulation, and experimental measurement. The resonance of thin piezoceramic disks is classified into three types of vibration modes: transverse, tangential, and radial extensional modes. All of these modes are investigated in detail. Two optical techniques, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV), are used to validate the theoretical analysis. Because the clear fringe patterns are shown only at resonant frequencies, both the resonant frequencies and the corresponding mode shapes are obtained experimentally at the same time by the proposed AF-ESPI method. Good quality of the interferometric fringe patterns for both the transverse and extensional vibration mode shapes are demonstrated. The resonant frequencies of the piezoceramic disk also are measured by the conventional impedance analysis. Both theoretical and experimental results indicate that the transverse and tangential vibration modes cannot be measured by the impedance analysis, and only the resonant frequencies of extensional vibration modes can be obtained. Numerical calculations based on the finite element method also are performed, and the results are compared with the theoretical analysis and experimental measurements. It is shown that the finite element method (FEM) calculations and the experimental results agree fairly well for the resonant frequencies and mode shapes. The resonant frequencies and mode shapes predicted by theoretical analysis and calculated by finite element method are in good agreement, and the difference of resonant frequencies for both results with the thickness-to-diameter (h/D) ratios, ranging from 0.01 to 0.1, are presented.

Journal Article↗

Experimental measurement and numerical analysis on resonant characteristics of piezoelectric disks with partial electrode designs.

Three experimental techniques are used in this study to access the influence of the electrode arrangement on the resonant characteristics of piezoceramic disks. These methods, including the amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI), laser Doppler vibrometer-dynamic signal analyzer (LDV-DSA), and impedance analysis, are based on the measurement of full-field displacement, pointwise displacement, and electric impedance, respectively. In this study, one full electrode design and three nonsymmetrical partial electrode designs of piezoelectric disks are investigated. Because the clear fringe patterns measured by the AF-ESPI method will be shown only at resonant frequencies, both the resonant frequencies and the corresponding vibration mode shapes are successfully obtained at the same time for out-of-plane and in-plane motions. The second experimental method is the impedance analysis, which is used to measure the resonant and antiresonant frequencies. In addition to these experimental methods, LDV-DSA is used to determine the resonant frequencies of the vibration mode with out-of-plane motion. From the experimental results, the dependence of electrode design on the vibration frequencies and mode shapes is addressed. Numerical computations based on the finite element method are presented, and the results are compared with the experimental measurements. The effect of different designs of electrode is more significant in the in-plane modes than that in the out-of-plane modes.

Journal Article↗

Cutaneous metaplastic synovial cyst: unusual presentation with "a bag of worms".

BACKGROUND: Cutaneous metaplastic synovial cyst (CMSC) is a rare cystic tumor that is unfamiliar to most dermatologists. A traumatic history usually precedes its onset. CMSC is often misdiagnosed as suture granuloma clinically. A correct diagnosis requires histopathologic examination to reveal its characteristic features, that is, a cystic tumor line by synovium-like structure. OBJECTIVE: To describe a case of CMSC encountered during dermatologic surgery practice. We present an unusual case with elongated projections. METHODS: A case report and literature review are presented. CONCLUSION: The differential diagnosis of tender cutaneous cysts should include CMSC. Projections from the cyst wall may attain significant size and give the intraoperative impression of a "bag of worms."

Female↗

Adsorption and desorption characteristics of semiconductor volatile organic compounds on the thermal swing honeycomb zeolite concentrator.

The use of a honeycomb zeolite concentrator and an oxidation process is one of the most popular methods demonstrated to control volatile organic compound (VOCs) emissions from waste gases in semiconductor manufacturing plants. This study attempts to characterize the performance of a concentrator in terms of the removal efficiencies of semiconductor VOCs (isopropyl alcohol [IPA], acetone, propylene glycol methyl ether [PGME], and propylene glycol monomethyl ether acetate [PGMEA]) under several parameters that govern the actual operations. Experimental results indicated that at inlet temperatures of under 40 degrees C and a relative humidity of under 80%, the removal efficiency of a zeolite concentrator can be maintained well over 90%. The optimal rotation speed of the concentrator is between 3 and 4.5 rph in this study. The optimal rotation speed increases with the VOCs inlet concentration. Furthermore, reducing the concentration ratio helps to increase the removal efficiency, but it also increases the incineration cost. With reference to competitive adsorption, PGMEA and PGME are more easily adsorbed on a zeolite concentrator than are IPA and acetone because of their high boiling points and molecular weights.

Adsorption↗