Biomedical subjects

Yukishige Kondo

Publications and source records attributed to Yukishige Kondo.

10 recordsLinked to original sources

PubMed2006

Preparation of thin polymer films with drug release and protein adsorption resistance.

Thin polymer films with the ability of both drug release and protein adsorption resistance were formed on silicon substrates and silica particles. The films were made of a block copolymer of poly(N-isopropylacrylamide) (p(AAm)) that can load and release drugs and poly(2-methoxyethyl methacrylate) (p(MEMA)) that can suppress protein adsorption. Aspirin and bovine serum albumin were respectively used as model substances for testing the abilities of the films to load and release drugs and to suppress protein adsorption. The films were immersed in a phosphate buffer saline (pH 7.4) for 100 days to evaluate their water resistance. The experimental results showed that the films have both drug release and protein adsorption resistance and are highly stable against PBS.

Acrylic Resins↗

PubMed2006

Protein adsorption and stability of poly(ethylene oxide)-modified surfaces having hydrophobic layer between substrate and polymer.

The materials covered with poly(ethylene oxide) (PEO) are of use in a wide variety of biomaterials due to blood compatibility of this polymer. The long-term sustainability of its blood compatibility strongly depends on the stability of the PEO layer against aqueous environment. An attempt was made in the present work to immobilize a PEO layer on the silicon surfaces using a silane coupling agent with the aim to improve the waterproof durability of the layer. Several kinds of PEO-modified substrates having a densely and closely packed hydrocarbon layer between substrate and PEO layer were prepared and the stability of the PEO layer against phosphate buffer saline (pH 7.4) was examined in terms of the density of hydrocarbon chains. Those substrates which have a dense hydrophobic chain layer showed a high waterproof durability and a good ability to suppress protein adsorption.

Adsorption↗

PubMed2006

Protein adsorption on polymer-modified silica particle surface.

Silicon substrate surface and silica particle surface were modified with five kinds of polymers, poly(2-methoxyethyl methacrylate) (pMEMA), poly(2-hydroxyethyl methacrylate) (pHEMA), poly(acrylamide) (pAAm), poly(methyl methacrylate) (pMMA), and poly(styrene) (pSt), using a combined polymerization of surface-initiated polymerization that gives dense polymer chain layers and atom transfer radical polymerization (ATRP) that yields polymers with a narrow molecular weight distribution. Measurements of water contact angle and polymer chain amount on the modified silicon substrate surface and adsorption amounts of proteins (albumin and fibrinogen) on the modified silica particle surface revealed that the amount of polymer on the modified surface greatly affects the suppression of protein adsorption on the surface.

Adsorption↗

PubMed2006

Surface modification of poly(oligoethylene oxide methacrylate) for resisting protein adsorption.

We prepare poly(2-methoxyethyl-, 2-(2-methoxyethoxy)ethyl-, 2-[2-(2-methoxyethoxy)ethoxy]ethyl methacrylate) (p(nEOMA), n=1, 2, and 3) brushed surfaces with varying the polymer density by surface initiated polymerization. The amount of bovine serum albumin (BSA) adsorbed on the surfaces is investigated. The mobility of the polymer chain in the polymer/water interfaces and the structure of adsorbed water on the surfaces are characterized by Electron Spin Resonance (ESR) and transmission-Fourier transform infrared (FT-IR) spectroscopy, respectively. This work reports the relationship between these surface properties and albumin adsorption. As a result, the surface having both a high molecular mobility and bulk-like water found to be very effective in preventing albumin adsorption.

Adsorption↗

PubMed2006

Ferrocene-containing cationic lipids for the delivery of DNA: oxidation state determines transfection activity.

The ability of two redox-active, ferrocene-containing cationic lipids [11-(ferrocenylundecyl)trimethylammonium bromide (FTMA) and bis(11-ferrocenylundecyl)dimethylammonium bromide (BFDMA)] to transfect mammalian cells was investigated. This study sought to determine the range of conditions over which these lipids were capable of transfecting cells and whether the oxidation state of the ferrocenyl groups in these materials could be used to influence the extent of transfection. Experiments conducted in the COS-7 cell line demonstrated that reduced and oxidized FTMA were substantially cytotoxic and did not transfect cells. Subsequent experiments conducted using BFDMA and reporter plasmids encoding enhanced green fluorescent protein (EGFP) and firefly luciferase demonstrated that BFDMA was able to transfect cells. However, the extent of transfection depended significantly upon both the concentration of BFDMA and the oxidation state of the lipid. Quantitative characterization of cytotoxicity and gene expression demonstrated that a window of concentration existed over which reduced BFDMA was non-cytotoxic and yielded high levels of transfection, but over which electrochemically oxidized BFDMA yielded very low (background) levels of transfection. Characterization of lipoplexes using dynamic light scattering demonstrated that reduced and oxidized BFDMA formed small aggregates (ca. 90 to 250nm) at concentrations of lipid ranging from 2 to 10 microM. Taken together, these results demonstrate that the oxidation state of BFDMA, which can be controlled electrochemically, can be used to control the extent of cell transfection. These results could form the basis of transfection procedures that exploit the redox behavior of ferrocene-containing lipids to achieve active spatial and temporal control over transfection using electrochemical methods.

Animals↗

PubMed2005

Ferrocene-containing cationic lipids: influence of redox state on cell transfection.

A ferrocene-containing, redox-active cationic lipid that can be transformed using electrochemical methods yields large differences in cell transfection depending on the oxidation state of the lipid. Expression of enhanced green fluorescent protein and firefly luciferase occurs at very high levels when DNA lipoplexes are formulated using the lipid in the reduced state. In contrast, transfection is negligible when oxidized lipid is used. These observations suggest the basis of a general method that could be used to transform inactive lipoplex formulations to an active form through the application of externally applied electrical potentials. The ability to activate lipoplexes toward transfection electrochemically and "on demand" could create new opportunities to deliver DNA in vitro and in vivo with both spatial and temporal control.

Animals↗

PubMed2004

Control of viscoelasticity using redox reaction.

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.

Journal Article↗

PubMed2004

Template-directed patterning using phase-separated Langmuir-Blodgett films.

The structures of the mixed Langmuir-Blodgett (LB) films of conventional amphiphiles (CAs) and amphiphilic silane-coupling agents (SCAs) were investigated using IR spectroscopy, atomic force microscopy, and friction force microscopy. By using CAs having hydrogenated alkyl chains and SCAs having perfluorinated alkyl chains, phase-separated structures were formed with domains consisting of CAs surrounded by SCAs. The size and shape of the domains depended strongly on the mixed components, the mixing ratios, and the subphase temperature. In particular, usage of a CA having hydrogenated and perfluorinated portions in the hydrophobic group as one of the components led to the formation of nanothreads. When the phase-separated mixed LB films were heated, SCAs formed covalent bonds with the substrates having silanol groups whereas CAs did not have such ability. Rinsing the heat-treated LB films with ethanol selectively removed CAs with the SCA regions intact, resulting in the fabrication of templates. The structures of the templates reflected those of the original phase-separated LB films. LB transfer of amphiphiles on the templates led to the confinement of the amphiphiles in regions with the size and shape delineated by the templates. These results demonstrate that a variety of amphiphiles can be confined two-dimensionally in a designed manner.

Journal Article↗

PubMed2004

Interfacial properties of branch-tailed fluorinated surfactants yielding a water/supercritical CO2 microemulsion.

We have examined the interfacial properties of several fluorinated surfactants in a water/CO2 mixture with a pendant drop tensiometer and revealed the relationships between the interfacial properties, the surfactant structure, and the microemulsifying power. We employed the following Aerosol-OT analogue surfactants that have two fluorinated tails: bis(1H,1H,5H-octafluoropentyl)-2-sulfosuccinate (di-HCF4), sodium bis(1H,1H,9H-hexadecafluorononyl)-2-sulfosuccinate (di-HCF8), sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), and sodium bis((1H,1H,2H,2H-heptadecafluorodecyl)-oxyethylene)-2-sulfosuccinate (8FS(EO)4). To discuss the effect of the fluorocarbon/hydrocarbon ratio in single surfactant molecules, water/CO2 interfacial tension (IFT) of a hybrid surfactant with one fluorocarbon and one hydrocarbon tail, that of a surfactant with a single fluorinated tail, and that of a hydrocarbon surfactant, Aerosol-OT (AOT), were examined. The hybrid surfactant employed was sodium 1-oxo-1-[4-(tridecafluorohexyl)phenyl]-2-hexanesulfonate (FC6-HC4), and the single-tailed surfactant was perfluoropolyether ammonium carboxylate (PFPECOONH4, CF3CF2(CF2OCF(CF3))4COONH4). All of the fluorinated AOT analogue surfactants exhibited an excellent level of activity at the water/CO2 interface compared with other fluorinated surfactants and AOT. With a larger hydrocarbon chain number in the CO2-philic tails (i.e., from 0 to 2), the IFT of the AOT analogue surfactants was increased. The area occupied by one surfactant molecule at the water/CO2 interface, A, and the critical microemulsion concentration, cmicroc, were determined and used to examine the water-to-surfactant molar ratio within a reversed micelle, W0c, of the surfactants. The surfactants that form W/scCO2 microemulsions with a large W0c were found to lower the interfacial tension efficiently irrespective of increases in temperature. To achieve the most desirable W0C, the surfactant needs not only a high CO2-philicity of the tails but also a high Krafft point, properties which induce a low hydrophilic/CO2-philic balance.

Carbon Dioxide↗

PubMed2002

First anionic micelle with unusually long lifetime: self-assembly of fluorocarbon-hydrocarbon hybrid surfactant.

The exchange of a fluorocarbon-hydrocarbon hybrid surfactant between monomer and micelle states in deuterium oxide has been investigated through 19F NMR and 1H NMR experiments. The CF3 group in the surfactant gives two kinds of 19F NMR signals corresponding to the monomer and micelle states, indicating slow surfactant exchange on NMR time scale. The lifetime (taumic) of micelle, estimated by line shape analysis of the signals, is 2.0 ms at cmc, 102 to 103 times longer than that of general surfactant micelles. Pulsed-gradient spin-echo (PGSE) experiments show that the hybrid surfactant forms considerably small micelles with a hydrodynamic radius of 0.6 nm. In contrast, at a higher concentration where no slow surfactant exchange is observed, the micelle radius increases to 1.1 nm. The interdigitation between the surfactant molecules in the micelle will contribute to the unusually long lifetime, in other words, slow surfactant exchange on the NMR time scale.

Journal Article↗