PubMed Health⌕ Search

Biomedical subjects

Yuri M Lvov

Publications and source records attributed to Yuri M Lvov.

At least 19 recordsLinked to original sources
PubMed2006

Layer-by-layer enzyme/polyelectrolyte films as a functional protective barrier in oxidizing media.

The influence of a catalase (Cat) layer located at different depths in the layer-by-layer hemoglobin/polystyrene sulfonate films with an (Hb/PSS)(20)(-)(x)/(Cat/PSS)/(Hb/PSS)(x) (x = 0-20) architecture on kinetics of hemoglobin degradation under treatment with hydrogen peroxide solutions of different concentrations and features of H(2)O(2) decay in surrounding solutions has been studied. While assembled on the top of the multilayers, the catalase layer shows the highest activity in hydrogen peroxide decomposition. Hemoglobin in such films retains its nativity for a longer period of time. The effect of catalase layers is compared with that of protamine, horseradish peroxidase, and inactivated catalase. Positioning an active layer with catalytic properties as an outer layer is the best protection strategy for layer-by-layer assembled films in aggressive media.

Electrolytes↗
PubMed2006

Stem cell attachment to layer-by-layer assembled TiO2 nanoparticle thin films.

Surface topography is one of the most important factors influencing the attachment and spreading of cells. In the present study, layer-by-layer assembled titanium dioxide (TiO2) nanoparticle thin films were chosen for attachment, proliferation and spreading studies on mouse mesenchymal stem cells (MSC). Increasing surface roughness was observed with increasing number of layer-by-layer assembled TiO2 thin films. Four layer TiO2 thin film showed higher number of attached cells than a one layer thin film and control surfaces. MSCs experienced no cytotoxic effects after culture on the TiO2 coated substrates as observed from the cytotoxicity tests. Cell spreading, visualized with scanning electron microscopy, showed a faster rate of spreading on a rougher surface. Cells on a four-layer substrate, at 12 h showed complete spreading, where as most of the cells on a control surface and a one-layer surface, at 24 h, retained a rounded morphology. In conclusion, TiO2 nanoparticle thin films were successfully assembled in alternation with polyelectrolytes and in-vitro studies with MSC showed an increase in the attachment and faster spreading of cells on rougher surfaces.

Cell Adhesion↗
PubMed2006

Layer-by-layer nanocoating of lignocellulose fibers for enhanced paper properties.

The systematic modification of the surface charge of lignocellulose fibers was performed with a polyelectrolyte layer-by-layer (LbL) nanocoating process to produce negatively and positively charged fibers. The fibers were coated with 20-50 nm thick polymer surface layers which subsequently increased interaction between the fibers during paper formation. The modified fibers were added to standard fibers at varying proportions to produce paper with corresponding variation in properties such as strength and electrical conductivity. Paper strength was doubled by manipulating the surface charge and coating thickness of the LbL-treated pulp fibers. It is demonstrated that the LbL coating process increased the fiber interactions and that these interactions enhanced the paper properties. This process, when applied to a simulated sample of recycle grade of fibers, produce paper with an increase in tear strength as compared with untreated fiber paper. Nanocoating fibers with polythiophene/polyallylamine multilayers produced marginally conductive pulp and paper. Paper electrical conductivity was proportional to the number of the bilayers deposited.

Adsorption↗
PubMed2006

Nano-engineered microcapsules of tannic acid and chitosan for protein encapsulation.

Tannic acid (TA), a high molecular weight polyphenol of natural origin, was assembled in alternation with chitosan (CH) using a layer-by-layer technique. The deposition of tannic acid and chitosan layers on flat supports was monitored by quartz crystal microbalance, UV-vis spectroscopy, and electrophoretic mobility measurements on microparticles. Hollow (TA/CH)4 capsules were built and their permeability as a function of pH and molecular weight of a penetrating compound was investigated. The pH-permeability threshold for TA/CH capsules is shifted to lower pH for 2 pH units, as compared with commonly used polyallylamine/polystyrene sulfonate capsules. A more pronounced dependence of the TA/CH capsules' permeability on molecular weight of encapsulated substances allows better control over their release properties. Bovine serum albumin was loaded into (TA/CH)4 capsules using a pH-driven method and released by decreasing pH. Biocompatible tannic acid/chitosan films and capsules have advantages toward capsules made of synthetic polyelectrolytes for drug encapsulation and as delivery and depot systems. Incorporating a layer of tannic acid with proved antioxidant and antimicrobial properties into capsule walls, provides defense for encapsulated materials.

Animals↗
PubMed2005

Nano-assembly of manganese peroxidase and lignin peroxidase from P. chrysosporium for biocatalysis in aqueous and non-aqueous media.

Development, characterization, and activity studies of nano-assemblies of lignin peroxidase (LiP), and manganese peroxidase (MnP) from Phanerochaete chrysosporium on flat surfaces as well as colloidal particles have been investigated. These assemblies of LiP and MnP were fabricated with polyelectrolytes-poly(ethylenimine) (PEI), poly(dimethyldiallylammonium chloride) (PDDA), and poly(allylamine) (PAH)-using a layer-by-layer self-assembly technique (LbL). Characterization of these assemblies on flat surfaces was monitored using quartz crystal microbalance (QCM), while assemblies on microparticles such as melamine formaldehyde (MF) were carried out with zeta potential analyzer (ZPA). A unique dynamic adsorption-desorption of the enzyme layers is observed during the assembly. All the nano-assemblies of LiP and MnP can effectively oxidize veratryl alcohol (VA) to its aldehyde for an extended period of time. The effect of different polyions and the number of polyion layers on the activities of LiP and MnP nano-assembly was also examined. It is observed that drying of enzyme layer during the assembly and the use of non-aqueous media, such as acetone can significantly reduce the activity of the enzymes. Enzyme activity reaches a minimum when the concentration of acetone is increased to 30%; however, the activity can be restored to its original value by increasing the concentration of aqueous media. Preliminary studies using assemblies of LiP and MnP on MF microparticles further demonstrate the feasibility of developing potential systems for degradation of environmental pollutants.

Adsorption↗
PubMed2005

Controlled release of dexamethasone from microcapsules produced by polyelectrolyte layer-by-layer nanoassembly.

PURPOSE: In an effort to expand the application of core-shell structures fabricated by electrostatic layer-by-layer (LbL) self-assembling for drug delivery, this study reports the controlled release of dexamethasone from microcrystals encapsulated with a polyelectrolyte shell. METHODS: The LbL self-assembly process was used to produce dexamethasone particles encapsulated with up to five double layers formed by alternating the adsorption of positively charged poly(dimethyldiallyl ammonium chloride), negatively charged sodium poly(styrenesulfonate) and depending on the pH positively or negatively charged gelatin A or B onto the surface of the negatively charged dexamethasone particles. The nano-thin shells were characterized by quartz crystal microbalance measurements, microelectrophoresis, microcalorimetry, confocal microscopy, and scanning electron microscopy. In vitro release of dexamethasone from the microcapsules suspended in water or carboxymethylcellulose gels were measured using vertical Franz-type diffusion cells. RESULTS: Sonication of a suspension of negatively charged dexamethasone microcrystals in a solution of PDDA not only reduced aggregation but also reduced the size of the sub-micrometer particles. Assembly of multiple polyelectrolyte layers around these monodispersed cores produced a polyelectrolyte multilayer shell around the drug microcrystals that allowed for controlled release depending on the composition and the number of layers. CONCLUSIONS: Direct surface modification of dexamethasone microcrystals via the LbL process produced monodispersed suspensions with diffusion-controlled sustained drug release via the polyelectrolyte multilayer shell.

Capsules↗
PubMed2005

Magnetic switch of permeability for polyelectrolyte microcapsules embedded with Co@Au nanoparticles.

We explored using a magnetic field to modulate the permeability of polyelectrolyte microcapsules prepared by layer-by-layer self-assembly. Ferromagnetic gold-coated cobalt (Co@Au) nanoparticles (3 nm diameter) were embedded inside the capsule walls. The final 5 mum diameter microcapsules had wall structures consisting of 4 bilayers of poly(sodium styrene sulfonate)/poly(allylamine hydrochloride) (PSS/PAH), 1 layer of Co@Au, and 5 bilayers of PSS/PAH. External alternating magnetic fields of 100-300 Hz and 1200 Oe were applied to rotate the embedded Co@Au nanoparticles, which subsequently disturbed and distorted the capsule wall and drastically increased its permeability to macromolecules like FITC-labeled dextran. The capsule permeability change was estimated by taking the capsule interior and exterior fluorescent intensity ratio using confocal laser scanning microscopy. Capsules with 1 layer of Co@Au nanoparticles and 10 polyelectrolyte bilayers are optimal for magnetically controlling permeability. A theoretical explanation was proposed for the permeability control mechanisms. "Switching on" of these microcapsules using a magnetic field makes this method a good candidate for controlled drug delivery in biomedical applications.

Capsules↗
PubMed2005

Layer-by-Layer assembly of TiO2 nanoparticles for stable hydrophilic biocompatible coatings.

Stable, super-hydrophilic (water contact angle approximately equal to 0 degrees) titanium dioxide nanoparticle thin films have been obtained on substrates with different initial wettability such as glass, poly(methyl methacrylate) and poly(dimethyl siloxane) using layer-by-layer nano-assembly method. Titanium dioxide nanoparticles were alternated with poly(styrene sulfonate) to form films of thickness ranging from 11 nm to 220 nm. The hydrophilicity of these thin films increases with increasing number of deposited PSS/TiO2 bilayers. It was found that 2, 5 and 20 layers were needed to form super-hydrophilic TiO2 coating on glass, PMMA and PDMS respectively. Oxygen plasma treatment of substrate surfaces enhanced the formation of homogeneous TiO2 films and accelerated the formation of hydrophilic layers. Super-hydrophilicity has been shown to be unique to PSS/TiO2 films as compared with other polyelectrolyte/nanoparticle layers, and UV irradiation may restore hydrophilicity even after months of storing of the samples. Biocompatibility of TiO2 nanoparticle films has been demonstrated by the successful cell culture of human dermal fibroblast.

Biocompatible Materials↗
PubMed2004

Nanoassembly of biodegradable microcapsules for DNA encasing.

A new microcontainer for DNA delivery based on biocompatible poly[beta-glucuronic acid-(1 --> 3)-N-acetyl-beta-galactosamine-6-sulfate-(1 --> 4)](chondroitin sulfate)/poly(-l-arginine) microcapsules with 40 nm thick molecularly organized shell was proposed. DNA molecules were deposited as DNA/sperimidine complex on the surface of template 4 mum core particles followed by layer-by-layer nanoassembly of protective chondroitin sulfate/poly(-l-arginine) shell. After template core dissolution, DNA molecules were captured inside microcapsules retaining a natural double-helix structure. The developed DNA encapsulation approach can be employed for targeted delivery of plasmid DNA in living cells.

Biocompatible Materials↗
PubMed2004

Nanoparticles, molecular biosensors, and multispectral confocal microscopy.

Complex, multilayered nanoparticles hold great promise for more sophisticated drug/gene delivery systems to single cells. Outermost layers can include cell targeting and cell-entry facilitating molecules. The next layer can include intracellular targeting molecules for precise delivery of the nanoparticle complex inside the cell of interest. Molecular biosensors can be used to confirm the presence of expected molecules (for example, reactive oxygen species (ROS) as a surrogate molecule for signs of infection, or for activation in radiation damage, etc.) prior to delivery of counter-measure molecules such as drugs or gene therapy. They can also be used as a feedback control mechanism to control the proper amount of drug/gene delivery for each cell. Importantly, the full nanoparticle system can be used to prevent any cells from encountering the drug unless that cell is specifically targeted. Thus, if a cell is initially non-specifically targeted, a secondary check for other molecular targets which must also be present inside the target cell of interest can be used to catch initial targeting mistakes and prevent subsequent delivery of treatment molecules to the wrong cells. The precise intracellular location of nanoparticles within specific regions of a cell can be confirmed by 3D multispectral confocal microscopy. These single cell molecular morphology measurements can be extended from individual cells, to other cells in a tissue in tissue monolayers or tissue sections.

Biocompatible Materials↗
PubMed2003

Complex catalytic colloids on the basis of firefly luciferase as optical nanosensor platform.

In the present work the layer-by-layer nano-assembly technique was used for the development of complex catalytic microparticles on the basis of firefly luciferase (FL). FL films containing 1, 2, or 3 monolayers were assembled on silver electrode QCM-resonators and on 520-nm diameter sulfonated polystyrene latex by alternate adsorption of FL and polycations using electrostatic interactions for the interlayer interaction. The assembly process was studied with quartz crystal microbalance, UV-vis spectroscopy, and microelectrophoresis (surface potential). Structural studies of the resulting multilayers confirmed stepwise deposition of FL and cationic poly(dimethyldiallyl ammonium chloride) with a bilayer thickness of 14 nm; a systematic shift of the surface potential from +28 mV for poly(dimethyldiallyl ammonium chloride) to -14 mV for luciferase outermost layer was established. The functionality and stability of the biocolloids were demonstrated by monitoring the intensity of the light emission. Factors influencing the light emitted upon catalytic activity of FL such as the number of luciferase layers in the film and polyion layer at the outermost layer were studied.

Adenosine Triphosphate↗
PubMed2003

Biocompatibility of layer-by-layer self-assembled nanofilm on silicone rubber for neurons.

Electrostatic layer-by-layer (LbL) self-assembly, a novel method for ultrathin film coating has been applied to silicone rubber to encourage nerve cell adhesion. The surfaces studied consisted of precursor layers, with alternating cationic poly(ethyleneimine) (PEI) and anionic sodium poly(styrenesulfonate) (PSS) followed by alternating laminin and poly-D-lysine (PDL) layers or fibronectin and PDL layers. Film growth increased linearly with the number of layers. Every fibronectin/PDL and laminin/PDL bilayer was 4.4 and 3.5 nm thick, respectively. All layers were more hydrophilic than the unmodified silicone rubber surface, as determined from contact angle measurements. Of the coatings studied, a PDL layer was the most hydrophilic. A multilayer film with composition [PSS/PEI]3+[fibronectin/PDL]4 or [PSS/PEI]3+[laminin/PDL]4 was highly favorable for neuron adhesion, in contrast to bare silicone rubber substrate. The film coated on silicone rubber is biocompatible for cerebellar neurons with active viability, as shown by lactate dehydrogenase (LDH) assay and fluorescence cellular metabolism observations. These results demonstrate that LbL self-assembly provides an effective approach to apply films with nanometer thickness to silicone rubber. Such only few nanometer thick films are biocompatible with neurons, and may be used to coat devises for long-term implant in the central nervous system.

Animals↗
PubMed2003

An amperometric biosensor with human CYP3A4 as a novel drug screening tool.

We developed a biosensor based on the redox properties of human CYP3A4 to directly monitor electron transfer to the heme protein. Enzyme films were assembled on gold electrodes by alternate adsorption of a CYP3A4 layer on top of a polycation layer. Direct, reversible electron transfer between the electrode and CYP3A4 was observed with voltammetry under anaerobic conditions. In the presence of oxygen, the oxidation peak of the hemoprotein disappeared, and the reduction peak increased 2- to 3-fold. Addition of CYP3A4 substrates (verapamil, midazolam, quinidine, and progesterone) to the oxygenated solution caused a concentration-dependent increase in the reduction current in cyclic voltammetric and amperometric experiments. Product analyses after electrolysis with the enzyme film showed catalytic activity of the biosensor depending on substrate concentration, its inhibition by ketoconazole, and a minor contribution of H(2)O(2) to the catalytic cycle. These results suggest that electron exchange between the electrode and the immobilized CYP3A4 occurred, and that metabolic activity of the enzyme was maintained. Thus, important requirements for the application of human CYP biosensors in order to identify drugs or drug candidates as substrates or inhibitors to the attached enzyme are fulfilled.

Biosensing Techniques↗
PubMed2003

Nano-encapsulation of furosemide microcrystals for controlled drug release.

Furosemide microcrystals were encapsulated with polyions and gelatin to control the release of the drug in aqueous solutions. Charged linear polyions and gelatin were alternatively deposited on 5-microm drug microcrystals through layer-by-layer (LbL) assembly. Sequential layers of poly(dimethyldiallyl ammonium chloride) (PDDA) and poly(styrenesulfonate) (PSS) were followed by adsorption of two to six gelatin/PSS bilayers with corresponding capsule wall thicknesses ranging from 45 to 115 nm. The release of furosemide from the coated microparticles was measured in aqueous solutions of pH 1.4 and 7.4. At both pH values, the release rate of furosemide from the encapsulated particles was reduced by 50-300 times (for capsules coated with two to six bilayers) compared to uncoated furosemide. The results provide a method of achieving prolonged drug release through self-assembly of polymeric shells on drug microcrystals.

Crystallization↗
PubMed2003

Photocatalytic microreactors based on TiO2-modified polyelectrolyte multilayer capsules.

Spatially confined photocatalytic microreactors for microheterogeneous photoreduction of metal ions from aqueous solutions have been developed. The microreactors consist of hollow micron-sized polyelectrolyte capsules with photoactive TiO2 nanoparticles incorporated in the walls. Additional improvements in metal photoreduction efficiency were achieved by filling the microcapsule cavity with a more effective electron donor.

Journal Article↗
PubMed2003

Coating and selective deposition of nanofilm on silicone rubber for cell adhesion and growth.

A recently developed method for surface modification, layer-by-layer (LbL) assembly, has been applied to silicone, and its ability to encourage endothelial cell growth and control cell growth patterns has been examined. The surfaces studied consisted of a precursor, with alternating cationic polyethyleneimine (PEI) and anionic sodium polystyrene sulfonate (PSS) layers followed by alternating gelatin and poly-D-lysine (PDL) layers. Film growth increased linearly with the number of layers. Each PSS/PEI bilayer was 3 nm thick, and each gelatin/PDL bilayer was 5 nm thick. All layers were more hydrophilic than the unmodified silicone rubber surface, as determined from contact angle measurements. The contact angle was primarily dictated by the outermost layer. Of the coatings studied, gelatin was the most hydrophilic. A film of (PSS/PEI)4/(gelatin/PDL)4/ gelatin was highly favorable for cell adhesion and growth, in contrast to films of (PSS/PEI)8 or (PSS/PEI)8/PSS. Cell growth patterns were successfully controlled by selective deposition of microspheres on silicone rubber, using microcontact printing with a silicone stamp. Cell adhesion was confined to the region of microsphere deposition. These results demonstrate that the LbL self-assembly technique provides a general approach to coat and selectively deposit films with nanometer thickness on silicone rubber. Furthermore, they show that this method is a viable technique for controlling cellular adhesion and growth.

Animals↗
PubMed2003

Biomedical applications of electrostatic layer-by-layer nano-assembly of polymers, enzymes, and nanoparticles.

The introduction of electrostatic layer-by-layer (LbL) self-assembly has shown broad biomedical applications in thin film coating, micropatterning, nanobioreactors, artificial cells, and drug delivery systems. Multiple assembly polyelectrolytes and proteins are based on electrostatic interaction between oppositely charged layers. The film architecture is precisely designed and can be controlled to 1-nm precision with a range from 5 to 1000 nm. Thin films can be deposited on any surface including many widely used biomaterials. Microencapsulation of micro/nanotemplates with multilayers enabled cell surface modification, controlled drug release, hollow shell formation, and nanobioreactors. Both in vitro and in vivo studies indicate potential applications in biology, pharmaceutics, medicine, and other biomedical areas.

Biomimetic Materials↗