PubMed Health⌕ Search

Biomedical subjects

Yuval Shoham

Publications and source records attributed to Yuval Shoham.

At least 19 recordsLinked to original sources

The ywad gene from Bacillus subtilis encodes a double-zinc aminopeptidase.

The yet uncharacterized ywad gene from Bacillus subtilis has been cloned and overexpressed in Escherichia coli. The gene product (BSAP) was purified and shown to be an aminopeptidase. The activity of BSAP was optimal at pH 8.4, the enzyme was stable for 20 min at 80 degrees C and its activity was not affected by serine protease and aspartic protease inhibitors, but was completely diminished by the Zn-chelator 1,10-phenanthroline. ZnCl2 was able to restore activity, and the binding stoichiometry of zinc to apo-BSAP indicated two Zn ions per protein molecule. BSAP exhibited high preference toward p-nitroanilide derived Arg, Lys, and Leu synthetic substrates resulting in kcat/Km values of 1-5 x 10(1) s(-1) mM(-1).

Amino Acid Sequence↗

Biochemical characterization and identification of the catalytic residues of a family 43 beta-D-xylosidase from Geobacillus stearothermophilus T-6.

Beta-D-xylosidases are hemilcellulases that hydrolyze short xylooligosaccharides into xylose units. Here, we describe the characterization and kinetic analysis of a family 43 beta-xylosidase from Geobacillus stearothermophilus T-6 (XynB3). Enzymes in this family use an inverting single-displacement mechanism with two conserved carboxylic acids, a general acid, and a general base. XynB3 was most active at 65 degrees C and pH 6.5, with clear preference to xylose-based substrates. Products analysis indicated that XynB3 is an exoglycosidase that cleaves single xylose units from the nonreducing end of xylooligomers. On the basis of sequence homology, amino acids Asp15 and Glu187 were suggested to act as the general-base and general-acid catalytic residues, respectively. Kinetic analysis with substrates bearing different leaving groups showed that, for the wild-type enzyme, the k(cat) and k(cat)/K(m) values were only marginally affected by the leaving-group reactivity, whereas for the E187G mutant, both values exhibited significantly greater dependency on the pK(a) of the leaving group. The pH-dependence activity profile of the putative general-acid mutant (E187G) revealed that the protonated catalytic residue was removed. Addition of the exogenous nucleophile azide did not affect the activities of the wild type or the E187G mutant but rescued the activity of the D15G mutant. On the basis of thin-layer chromatography and (1)H NMR analyses, xylose and not xylose azide was the only product of the accelerated reaction, suggesting that the azide ion does not attack the anomeric carbon directly but presumably activates a water molecule. Together, these results confirm the suggested catalytic role of Glu187 and Asp15 in XynB3 and provide the first unequivocal evidence regarding the exact roles of the catalytic residues in an inverting GH43 glycosidase.

Amino Acid Substitution↗

Preliminary crystallographic characterization of BSAP, an extracellular aminopeptidase from Bacillus subtilis.

The extracellular aminopeptidase from Bacillus subtilis (BSAP) has recently been cloned, overexpressed and purified from Escherichia coli. It is a monomer with a molecular weight of 46 425 Da, consisting of 425 amino-acid residues and a double-zinc catalytic centre. The recombinant enzyme was found to be stable for 20 min at 353 K, to function optimally in the pH range 8-9 and to prefer basic and large hydrophobic N-terminal amino acids in peptide and protein substrates. As such, this enzyme can be used as a representative model for structural, functional and mechanistic studies of monomeric double-zinc aminopeptidases, many of which have been found to be involved in medically important biological activities. In this report, the crystallization and preliminary crystallographic characterization of wild-type BSAP are described. Two different crystal forms are reported, of which the hexagonal form H2 is the more suitable for structural study, with average unit-cell dimensions a = b = 226.5, c = 42.8 A. A full diffraction data set has been collected from such a crystal of the native enzyme (2.2 A resolution, 91.2% completeness, R(merge) = 7.1%). A multiwavelength anomalous diffraction (MAD) data set was collected on native (zinc-containing) BSAP at three wavelengths around the zinc absorption edge (peak data set at 2.5 A resolution, 98.8% completeness, R(merge) = 5.3%). These diffraction data were collected at 95-100 K using a synchrotron X-ray source and a CCD area detector. The data are currently being used to obtain crystallographic phasing and to determine the detailed three-dimensional structure of the enzyme.

Aminopeptidases↗

The structural basis of the thermostability of SP1, a novel plant (Populus tremula) boiling stable protein.

We previously reported on a new boiling stable protein isolated from aspen plants (Populus tremula), which we named SP1. SP1 is a stress-related protein with no significant sequence homology to other stress-related proteins. It is a 108-amino-acid hydrophilic polypeptide with a molecular mass of 12.4 kDa (Wang, W. X., Pelah, D., Alergand, T., Shoseyov, O., and Altman, A. (2002) Plant Physiol. 130, 865-875) and is found in an oligomeric form. Preliminary electron microscopy studies and matrix-assisted laser desorption ionization time-of-flight mass spectrometry experiments showed that SP1 is a dodecamer composed of two stacking hexamers. We performed a SDS-PAGE analysis, a differential scanning calorimetric study, and crystal structure determination to further characterize SP1. SDS-PAGE indicated a spontaneous assembly of SP1 to one stable oligomeric form, a dodecamer. Differential scanning calorimetric showed that SP1 has high thermostability i.e. Tm of 107 degrees C (at pH 7.8). The crystal structure of SP1 was initially determined to 2.4 A resolution by multi-wavelength anomalous dispersion method from a crystal belonging to the space group I422. The phases were extended to 1.8 A resolution using data from a different crystal form (P21). The final refined molecule includes 106 of the 108 residues and 132 water molecules (on average for each chain). The R-free is 20.1%. The crystal structure indicated that the SP1 molecule has a ferredoxin-like fold. Strong interactions between each two molecules create a stable dimer. Six dimers associate to form a ring-like-shaped dodecamer strongly resembling the particle visualized in the electron microscopy studies. No structural similarity was found between the crystal structure of SP1 and the crystal structure of other stress-related proteins such as small heat shock proteins, whose structure has been already determined. This structural study further supports our previous report that SP1 may represent a new family of stress-related proteins with high thermostability and oligomerization.

Amino Acid Sequence↗

Cohesin-dockerin interaction in cellulosome assembly: a single Asp-to-Asn mutation disrupts high-affinity cohesin-dockerin binding.

The cohesive cellulosome complex is sustained by the high-affinity cohesin-dockerin interaction. In previous work, we demonstrated that a single Thr-to-Leu replacement in the Clostridium thermocellum dockerin component differentiates between non-recognition and high-affinity recognition by the interspecies rival cohesin from C. cellulolyticum. In this report, we show that a single Asp-to-Asn substitution on the cohesin counterpart also disrupts normal recognition of the dockerin. The Asp34 carboxyl group of the cohesin appears to play a central role in the resultant hydrogen-bonding network as an acceptor of two crucial hydrogen bonds from Ser45 of the dockerin domain. The results underscore the fragile nature of the intermolecular contact interactions that maintain this very high-affinity protein--protein interaction.

Amino Acid Sequence↗

A reciprocal single mutation affects the metal requirement of 3-deoxy-D-manno-2-octulosonate-8-phosphate (KDO8P) synthases from Aquifex pyrophilus and Escherichia coli.

The enzyme 3-deoxy-d-manno-2-octulosonate-8-phosphate (KDO8P) synthase is metal-dependent in one class of organisms and metal-independent in another. We have used a rapid transient kinetic approach combined with site-directed mutagenesis to characterize the role of the metal ion as well as to explore the catalytic mechanisms of the two classes of enzymes. In the metal-dependent Aquifex pyrophilus KDO8P synthase, Cys11 was replaced by Asn (ApC11N), and in the metal-independent Escherichia coli KDO8P synthase a reciprocal mutation, Asn26 to Cys, was prepared (EcN26C). The ApC11N mutant retained about 10% of the wild-type maximal activity in the absence of metal ions. Addition of divalent metal ions did not affect the catalytic activity of the mutant enzyme and its catalytic efficiency (kcat/Km) was reduced by only approximately 12-fold, implying that the ApC11N KDO8P synthase mutant has become a bone fide metal-independent enzyme. The isolated EcN26C mutant had similar metal content and spectral properties as the metal-dependent wild-type A. pyrophilus KDO8P synthase. EDTA-treated EcN26C retained about 6% of the wild-type activity, and the addition of Mn2+ or Cd2+ stimulated its activity to approximately 30% of the wild-type maximal activity. This suggests that EcN26C KDO8P synthase mutant has properties similar to that of metal-dependent KDO8P synthases. The combined data indicate that the metal ion is not directly involved in the chemistry of the KDO8P synthase catalyzed reaction, but has an important structural role in metal-dependent enzymes in maintaining the correct orientation of the substrates and/or reaction intermediate(s) in the enzyme active site.

Aldehyde-Lyases↗

Pinpoint mapping of recognition residues on the cohesin surface by progressive homologue swapping.

The high affinity cohesin-dockerin interaction dictates the suprastructural assembly of the multienzyme cellulosome complex. The connection between affinity and species specificity was studied by exploring the recognition properties of two structurally related cohesin species of divergent specificity. The cohesins were examined by progressive rounds of swapping, in which corresponding homologous stretches were interchanged. The specificity of binding of the resultant chimeric cohesins was determined by enzyme-linked affinity assay and complementary protein microarray. In succeeding rounds, swapped segments were systematically contracted, according to the binding behavior of previously generated chimeras. In the fourth and final round we discerned three residues, reputedly involved in interspecies binding specificity. By replacing only these three residues, we were able to convert the specificity of the resultant mutated cohesin, which bound preferentially to the rival dockerin with approximately 20% capacity of the wild-type interaction. These residues represent but 3 of the 16 contact residues that participate in the cohesin-dockerin interaction. This approach allowed us to differentiate, in a structure-independent fashion, between residues critical for interspecies recognition and binding residues per se.

Amino Acid Sequence↗

Identification of the catalytic residues in the double-zinc aminopeptidase from Streptomyces griseus.

The aminopeptidase from Streptomyces griseus (SGAP) has been cloned and expressed in Escherichia coli. By growing the cells in the presence of 1 M sorbitol at 18 degrees C, the protein was obtained in a soluble and active form. The amino acid sequence of the recombinant SGAP contained four amino acids differing from the previously published sequence. Re-sequencing of the native protein indicated that asparagines 70 and 184 are in fact aspartic acids as in the recombinant protein. Based on the crystal structure of SGAP, Glu131 and Tyr246 were proposed to be the catalytic residues. Replacements of Glu131 resulted in loss of activity of 4-5 orders of magnitude, consistent with Glu131 acting as the general base residue. Mutations in Tyr246 resulted in about 100-fold reduction of activity, suggesting that this residue is involved in the stabilization of the transition state intermediate.

Amino Acid Substitution↗

Mapping glycoside hydrolase substrate subsites by isothermal titration calorimetry.

Relating thermodynamic parameters to structural and biochemical data allows a better understanding of substrate binding and its contribution to catalysis. The analysis of the binding of carbohydrates to proteins or enzymes is a special challenge because of the multiple interactions and forces involved. Isothermal titration calorimetry (ITC) provides a direct measure of binding enthalpy (DeltaHa) and allows the determination of the binding constant (free energy), entropy, and stoichiometry. In this study, we used ITC to elucidate the binding thermodynamics of xylosaccharides for two xylanases of family 10 isolated from Geobacillus stearothermophilus T-6. The change in the heat capacity of binding (DeltaCp = DeltaH/DeltaT) for xylosaccharides differing in one sugar unit was determined by using ITC measurements at different temperatures. Because hydrophobic stacking interactions are associated with negative DeltaCp, the data allow us to predict the substrate binding preference in the binding subsites based on the crystal structure of the enzyme. The proposed positional binding preference was consistent with mutants lacking aromatic binding residues at different subsites and was also supported by tryptophan fluorescence analysis.

Binding Sites↗

Crystallization and preliminary crystallographic analysis of a thermostable family 52 beta-D-xylosidase from Geobacillus stearothermophilus T-6.

Beta-D-xylosidases (EC 3.2.1.37) are hemicellulases that hydrolyze short xylooligosaccharides into single xylose units. In this study, the first crystallization and preliminary X-ray analysis of a family 52 glycoside hydrolase, the beta-D-xylosidase (XynB2) from Geobacillus stearothermophilus T-6, is described. XynB2 is a dimeric protein consisting of two identical subunits of 705 amino acids with a calculated molecular weight of 79 894 Da. XynB2 was crystallized by the hanging-drop vapour-diffusion method and the crystals were found to belong to space group P1, with unit-cell parameters a = 80.6, b = 97.5, c = 107.2 A, alpha = 107.4, beta = 98.2, gamma = 106.6 degrees. The native crystals diffracted X-rays to a resolution of 2.0 A.

Bacillaceae↗

A new crystal form of XT6 enables a significant improvement of its diffraction quality and resolution.

Xylanases (1,4-beta-D-xylan xylanhydrolases; EC 3.2.1.8) hydrolyze the 1,4-beta-D-xylopyranosyl linkage of xylans. The detailed structural characterization of these enzymes is of interest for the elucidation of their catalytic mechanism and for their rational modification toward improved stability and specificity. An extracellular xylanase from Geobacillus stearothermophilus T-6 (XT6) has recently been cloned, overexpressed, purified and biochemically characterized. Previous crystallographic efforts resulted in a hexagonal crystal form, which subsequently proved to be of limited use for structural analysis, mainly because of its relatively poor diffraction quality and resolution. A systematic search for more suitable crystals of XT6 recently resulted in a new crystal form of this enzyme with significantly improved diffraction characteristics. The new crystals belong to a C-centred monoclinic crystal system (space group C2), with unit-cell parameters a = 121.5, b = 61.7, c = 89.1 A, beta = 119.7 degrees. These crystals diffract X-rays to better than 1.5 A resolution, showing a very clear diffraction pattern of relatively high quality. The crystals are mechanically strong and exhibit excellent radiation-stability when frozen under cold nitrogen gas. A full diffraction data set to 1.45 A resolution (94.1% completeness, R(merge) = 7.0%) has been collected from flash-frozen crystals of the native enzyme at 95 K using synchrotron radiation. Crystals of the E159A/E265A catalytic double mutant of XT6 were found to be isomorphous to those of native XT6. They were used for a full measurement of 1.8 A resolution diffraction data at 100 K (90.9% completeness; R(merge) = 5.0%). These data are currently being used for the high-resolution structure determination of XT6 and its mutant for mechanistic interpretations and rational introduction of thermostability.

Bacterial Proteins↗

Crystallization and preliminary X-ray analysis of family 39 beta-D-xylosidase from Geobacillus stearothermophilus T-6.

beta-D-Xylosidases (EC 3.2.1.37) are hemicellulases that hydrolyze short xylooligosaccharides into single xylose units. In this study, the crystallization and preliminary X-ray analysis of the beta-D-xylosidase (XynB1) from Geobacillus stearothermophilus T-6, a family 39 glycoside hydrolase, are described. XynB1 is a tetrameric protein consisting of four identical subunits of 503 amino acids and with a calculated molecular weight of 58 001 Da. Both the native and the selenomethionine-containing XynB1 were crystallized by the hanging-drop vapour-diffusion method and the crystals were found to belong to space group P2(1)2(1)2(1), with unit-cell parameters a = 92.7, b = 165.7, c = 311.0 A. The native crystals diffracted X-rays to a resolution of 2.1 A.

Bacterial Proteins↗

Synthesis and evaluation of a mechanism-based inhibitor of KDO8P synthase.

The enzyme 3-deoxy-D-manno-2-octulosonate-8-phosphate (KDO8P) synthase catalyzes the condensation reaction between phosphoenolpyruvate (PEP) and D-arabinose 5-phosphate (A5P) to produce KDO8P and inorganic phosphate. In attempts to investigate the lack of antibacterial activity of the most potent inhibitor of KDO8P synthase, the amino phosphonophosphate 3, we have synthesized its hydrolytically stable isosteric phosphonate analogue 4 and tested it as an inhibitor of the enzyme. The synthesis of 4 was accomplished in a one step procedure by employing the direct reductive amination in aqueous media between unprotected sugar phosphonate and glyphosate. The analogue 4 proved to be a competitive inhibitor of KDO8P synthase with respect to both substrates A5P and PEP binding. In vitro antibacterial tests against a series of different Gram-negative organisms establish that both inhibitors (3 and 4) lack antibacterial activity probably due to their reduced ability to penetrate the bacterial cell membrane.

Aldehyde-Lyases↗

A novel Acetivibrio cellulolyticus anchoring scaffoldin that bears divergent cohesins.

Sequencing of a cellulosome-integrating gene cluster in Acetivibrio cellulolyticus was completed. The cluster contains four tandem scaffoldin genes (scaA, scaB, scaC, and scaD) bounded upstream and downstream, respectively, by a presumed cellobiose phosphorylase and a nucleotide methylase. The sequences and properties of scaA, scaB, and scaC were reported previously, and those of scaD are reported here. The scaD gene encodes an 852-residue polypeptide that includes a signal peptide, three cohesins, and a C-terminal S-layer homology (SLH) module. The calculated molecular weight of the mature ScaD is 88,960; a 67-residue linker segment separates cohesins 1 and 2, and two approximately 30-residue linkers separate cohesin 2 from 3 and cohesin 3 from the SLH module. The presence of an SLH module in ScaD indicates its role as an anchoring protein. The first two ScaD cohesins can be classified as type II, similar to the four cohesins of ScaB. Surprisingly, the third ScaD cohesin belongs to the type I cohesins, like the seven ScaA cohesins. ScaD is the first scaffoldin to be described that contains divergent types of cohesins as integral parts of the polypeptide chain. The recognition properties among selected recombinant cohesins and dockerins from the different scaffoldins of the gene cluster were investigated by affinity blotting. The results indicated that the divergent types of ScaD cohesins also differ in their preference of dockerins. ScaD thus plays a dual role, both as a primary scaffoldin, capable of direct incorporation of a single dockerin-borne enzyme, and as a secondary scaffoldin that anchors the major primary scaffoldin, ScaA and its complement of enzymes to the cell surface.

Bacterial Proteins↗

Effect of dimer dissociation on activity and thermostability of the alpha-glucuronidase from Geobacillus stearothermophilus: dissecting the different oligomeric forms of family 67 glycoside hydrolases.

The oligomeric organization of enzymes plays an important role in many biological processes, such as allosteric regulation, conformational stability and thermal stability. alpha-Glucuronidases are family 67 glycosidases that cleave the alpha-1,2-glycosidic bond between 4-O-methyl-D-glucuronic acid and xylose units as part of an array of hemicellulose-hydrolyzing enzymes. Currently, two crystal structures of alpha-glucuronidases are available, those from Geobacillus stearothermophilus (AguA) and from Cellvibrio japonicus (GlcA67A). Both enzymes are homodimeric, but surprisingly their dimeric organization is different, raising questions regarding the significance of dimerization for the enzymes' activity and stability. Structural comparison of the two enzymes suggests several elements that are responsible for the different dimerization organization. Phylogenetic analysis shows that the alpha-glucuronidases AguA and GlcA67A can be classified into two distinct subfamilies of bacterial alpha-glucuronidases, where the dimer-forming residues of each enzyme are conserved only within its own subfamily. It seems that the different dimeric forms of AguA and GlcA67A represent the two alternative dimeric organizations of these subfamilies. To study the biological significance of the dimerization in alpha-glucuronidases, we have constructed a monomeric form of AguA by mutating three of its interface residues (W328E, R329T, and R665N). The activity of the monomer was significantly lower than the activity of the wild-type dimeric AguA, and the optimal temperature for activity of the monomer was around 35 degrees C, compared to 65 degrees C of the wild-type enzyme. Nevertheless, the melting temperature of the monomeric protein, 72.9 degrees C, was almost identical to that of the wild-type, 73.4 degrees C. It appears that the dimerization of AguA is essential for efficient catalysis and that the dissociation into monomers results in subtle conformational changes in the structure which indirectly influence the active site region and reduce the activity. Structural and mechanistic explanations for these effects are discussed.

Amino Acid Sequence↗

Architecture of the Bacteroides cellulosolvens cellulosome: description of a cell surface-anchoring scaffoldin and a family 48 cellulase.

A large gene downstream of the primary Bacteroides cellulosolvens cellulosomal scaffoldin (cipBc, now renamed scaA) was sequenced. The gene, termed scaB, contained an N-terminal leader peptide followed by 10 type I cohesins, an "X" domain of unknown structure and function, and a C-terminal S-layer homology (SLH) surface-anchoring module. In addition, a previously identified gene in a different part of the genome, encoding for a dockerin-borne family 48 cellulosomal glycoside hydrolase (Cel48), was sequenced completely, and a putative cellulosome-related family 9 glycosyl hydrolase was detected. Recombinant fusion proteins, comprising dockerins derived from either the ScaA scaffoldin or Cel48, were overexpressed. Their interaction with ScaA and ScaB cohesins was examined by immunoassay. The results indicated that the ScaB type I cohesin of the new anchoring protein binds selectively to the ScaA dockerin, whereas the Cel48 dockerin binds specifically to the type II ScaA cohesin 5. Thus, by virtue of the 11 type II ScaA cohesins and the 10 type I ScaB cohesins, the relatively simple two-component cellulosome-integrating complex would potentially incorporate 110 enzyme molecules onto the cell surface via the ScaB SLH module. Compared to previously described cellulosome systems, the apparent roles of the B. cellulosolvens cohesins are reversed, in that the type II cohesins are located on the enzyme-binding primary scaffoldin, whereas the type I cohesins are located on the anchoring scaffoldin. The results underscore the extensive diversity in the supramolecular architecture of cellulosome systems in nature.

5' Flanking Region↗

The cellulosomes: multienzyme machines for degradation of plant cell wall polysaccharides.

The discrete multicomponent, multienzyme cellulosome complex of anaerobic cellulolytic bacteria provides enhanced synergistic activity among the different resident enzymes to efficiently hydrolyze intractable cellulosic and hemicellulosic substrates of the plant cell wall. A pivotal noncatalytic subunit called scaffoldin secures the various enzymatic subunits into the complex via the cohesin-dockerin interaction. The specificity characteristics and tenacious binding between the scaffoldin-based cohesin modules and the enzyme-borne dockerin domains dictate the supramolecular architecture of the cellulosome. The diversity in cellulosome architecture among the known cellulosome-producing bacteria is manifest in the arrangement of their genes in either multiple-scaffoldin or enzyme-linked clusters on the genome. The recently described three-dimensional crystal structure of the cohesin-dockerin heterodimer sheds light on the critical amino acids that contribute to this high-affinity protein-protein interaction. In addition, new information regarding the regulation of cellulosome-related genes, budding genetic tools, and emerging genomics of cellulosome-producing bacteria promises new insight into the assembly and consequences of the multienzyme complex.

Amino Acid Sequence↗

Crystal structures of Geobacillus stearothermophilus alpha-glucuronidase complexed with its substrate and products: mechanistic implications.

Alpha-glucuronidases cleave the alpha-1,2-glycosidic bond between 4-O-methyl-d-glucuronic acid and short xylooligomers as part of the hemicellulose degradation system. To date, all of the alpha-glucuronidases are classified as family 67 glycosidases, which catalyze the hydrolysis via the investing mechanism. Here we describe several high resolution crystal structures of the alpha-glucuronidase (AguA) from Geobacillus stearothermophilus, in complex with its substrate and products. In the complex of AguA with the intact substrate, the 4-O-methyl-d-glucuronic acid sugar ring is distorted into a half-chair conformation, which is closer to the planar conformation required for the oxocarbenium ion-like transition state structure. In the active site, a water molecule is coordinated between two carboxylic acids, in an appropriate position to act as a nucleophile. From the structural data it is likely that two carboxylic acids, Asp(364) and Glu(392), activate together the nucleophilic water molecule. The loop carrying the catalytic general acid Glu(285) cannot be resolved in some of the structures but could be visualized in its "open" and "closed" (catalytic) conformations in other structures. The protonated state of Glu(285) is presumably stabilized by its proximity to the negative charge of the substrate, representing a new variation of substrate-assisted catalysis mechanism.

Geobacter↗