PubMed Health⌕ Search

Biomedical subjects

Yves Gnanou

Publications and source records attributed to Yves Gnanou.

14 recordsLinked to original sources

Two-dimensional polymeric nanomaterials through cross-linking of polybutadiene-b-poly(ethylene oxide) monolayers at the air/water interface.

Two-dimensional polymeric nanomaterials consisting of a continuously cross-linked polybutadiene (PB) two-dimensional network with poly(ethylene oxide) (PEO) domains of controlled sizes trapped within the PB network were synthesized. To reach that goal, novel (PB(Si(OEt)3)-b-PEO)3 star block copolymers were designed by hydrosilylation of the pendant double bonds of (PB-b-PEO)3 star block copolymer precursors with triethoxysilane. The (PB(Si(OEt)3)-b-PEO)3 star block copolymers were characterized by 1H NMR and IR spectroscopy. Self-condensation of the triethoxysilane pendant groups under acidic conditions led to a successful cross-linking of the polybutadiene blocks directly at the air/water interface without any additives or reagents. This strategy was found more efficient than radical cross-linking of (PB-b-PEO)3 with AIBN to get a homogeneously cross-linked monolayer of controlled and fixed morphology as demonstrated by the easy mechanical removal of the cross-linked Langmuir film from the water surface. As shown by AFM imaging, this strategy allows the accurate control of the PEO "pore" size depending on the monolayer surface pressure applied during the cross-linking reaction. The subphase pH and surface pressure influence on the cross-linking kinetics and monolayer morphologies were investigated by Langmuir trough studies (isotherm and isobar experiments) and AFM imaging.

Journal Article↗

pH responsiveness of dendrimer-like poly(ethylene oxide)s.

Poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA), two polymers known to form pH-sensitive aggregates through noncovalent interactions, were assembled in purposely designed architecture -a dendrimer-like PEO scaffold carrying short inner PAA chains-to produce unimolecular systems that exhibit pH responsiveness. Because of the particular placement of the PAA chains within the dendrimer-like structure, intermolecular complexation between acrylic acid (AA) and ethylene oxide (EO) units-and thus macroscopic aggregation or even mesoscopic micellization-could be avoided in favor of the sole intramolecular complexation. The sensitivity of such interactions to pH was exploited to generate dendrimer-like PEOs that reversibly shrink and expand with the pH. Such PAA-carrying dendrimer-like PEOs were synthesized in two main steps. First, a fifth-generation dendrimer-like PEO was obtained by combining anionic ring-opening polymerization (AROP) of ethylene oxide from a tris-hydroxylated core and selective branching reactions of PEO chain ends. To this end, an AB(2)C-type branching agent was designed: the latter includes a chloromethyl (A) group for its covalent attachment to the arm ends, two geminal hydroxyls (B(2)) protected in the form of a ketal ring for the growth of subsequent PEO generations by AROP, and a vinylic (C) double bonds for further functionalization of the interior of dendrimer-like PEOs. Reiteration of AROP and derivatization of PEO branches allowed us to prepare a dendrimer-like PEO of fourth generation with a total molar mass of 52,000 g x mol(-1), containing 24 external hydroxyl functions and 21 inner vinylic groups in the interior. A fifth generation of PEO chains was generated from this parent dendrimer-like PEO of fourth generation using a "conventional" AB(2)-type branching agent, and 48 PEO branches could be grown by AROP. The 48 outer hydroxy-end groups of the fifth-generation dendrimer-like PEO obtained were subsequently quantitatively converted into inert benzylic groups using benzyl bromide. The 21 internal vinylic groups carried by the PEO scaffold were then chemically modified in a two-step sequence into bromoester groups. The latter which are atom transfer radical polymerization (ATRP) initiating sites thus served to grow poly(tert-butylacrylate) chains. After a final step of hydrolysis of the tert-butyl ester groups, double, hydrophilic, dendrimer-like PEOs comprising 21 internal junction-attached poly(acrylic acid) (PAA) blocks could be obtained. Dynamic light scattering was used to determine the size of these dendrimer-like species in water and to investigate their response to pH variation: in particular, how the pH-sensitive complexation of EO and AA units affects their overall behavior.

Acrylic Resins↗

High performance poly(styrene-b-diene-b-styrene) triblock copolymers from a hydrocarbon-soluble and additive-free dicarbanionic initiator.

A new hydrocarbon-soluble (additive-free) dicarbanionic organolithium initiator, obtained by a simple halogen-lithium exchange reaction (Gilman's reaction) from a diarylhalide containing a side C15 alkyl chain, has been designed and used to initiate the anionic polymerization of butadiene and styrene. The dilithiated species formed afford well-defined poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymers with a high percentage of 1,4-microstructure polybutadiene (91%) and excellent mechanical properties, such as ultimate tensile strength higher than 30 MPa and elongation at a break of 1000%. This represents a breakthrough in the synthesis of SBS polymers, one of the most used thermoplastic elastomers.

Journal Article↗

Nanosized amorphous calcium carbonate stabilized by poly(ethylene oxide)-b-poly(acrylic acid) block copolymers.

Particles of amorphous calcium carbonate (ACC), formed in situ from calcium chloride by the slow release of carbon dioxide by alkaline hydrolysis of dimethyl carbonate in water, are stabilized against coalescence in the presence of very small amounts of double hydrophilic block copolymers (DHBCs) composed of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) blocks. Under optimized conditions, spherical particles of ACC with diameters less than 100 nm and narrow size distribution are obtained at a concentration of only 3 ppm of PEO-b-PAA as additive. Equivalent triblock or star DHBCs are compared to diblock copolymers. The results are interpreted assuming an interaction of the PAA blocks with the surface of the liquid droplets of the concentrated CaCO3 phase, formed by phase separation from the initially homogeneous reaction mixture. The adsorption layer of the block copolymer protects the liquid precursor of ACC from coalescence and/or coagulation.

Acrylic Resins↗

Toward an easy access to dendrimer-like poly(ethylene oxide)s.

Dendrimer-like poly(ethylene oxide)s (PEOs) were synthesized by an iterative divergent approach combining anionic polymerization of ethylene oxide from multi-hydroxylated precursors and branching reactions of PEO chain ends. Partial deprotonation of the hydroxyls (< 30%) and use of dimethyl sulfoxide as solvent proved crucial for a "controlled/living" polymerization of ethylene oxide at room temperature. These sequences of reactions allowed us to prepare a dendrimer-like PEO up to the eighth generation with a molar mass of 900 000 g mol(-1) and 384 external hydroxyl functions. All samples from generation 1 to 8 were characterized by 1H NMR spectroscopy, light scattering, and viscometry. The evolution of the intrinsic viscosity versus the generation number of these dendrimer-like PEO is similar to that of regular dendrimers.

Magnetic Resonance Spectroscopy↗

Polystyrene-block-poly(ethylene oxide) stars as surface films at the air/water interface.

Star diblock copolymers containing polystyrene (PS) and poly(ethylene oxide) (PEO) were investigated as surface films at the air/water interface. Both classic and dendritic-like stars were prepared containing either a PS core and PEO corona or the reverse. The investigated polymers, consisting of systematic variations in architectures and compositions, were spread at the air/water interface, generating reproducible surface pressure-area isotherms. All of the films could be compressed to higher pressures than would be possible for pure PEO. For stars containing 20% or more PEO, three distinct regions appeared. At higher areas, the PEO absorbs in pancakelike structures at the interface with PS globules sitting atop. Upon compression, a pseudoplateau transition region appeared. Both regions strongly depended on PEO composition. The pancake area and the pseudoplateau width and pressure increased in a linear fashion with an increasing amount of PEO. In addition, minimum limits of PEO chain length and mass percentage were determined for observing a pseudoplateau. At small areas, the film proved less compressible, producing a rigid film in which PS dominated. Here, the film area increased with both molecular weight and the amount of PS. Comparison with pure linear PS showed the stars spread more, occupying greater areas. Among the stars, the PEO-core stars were more compact while the PS-core stars spread more. The influence of architecture in terms of the core/corona polymers and branching were also examined. The effects of architecture were subtle, proving less important than PEO chain length or mass percentage.

Journal Article↗

Dendrimer-like PEO glycopolymers exhibit anti-inflammatory properties.

A new class of high molecular weight polysulfated PEO dendrimer-like glycopolymer has been synthesized by a combination of arm-first and core-first methodologies followed by trichloroacetimidate glycosidation as a facile bioconjugation strategy. An L-selectin antagonist was identified that exhibits 103-fold greater activity than other multivalent sLex glycopolymers and 20-50 times greater potency than other linear heparinoids. A significant reduction in inflammatory cell recruitment was observed in vivo.

Animals↗

Structure of polypeptide-based diblock copolymers in solution: stimuli-responsive vesicles and micelles.

Polypeptide-based diblock copolymers forming either well-defined self-assembled micelles or vesicles after direct dissolution in water or in dichloromethane have been studied combining light and neutron scattering with electron microscopy experiments. The size of these structures could be reversibly manipulated as a function of environmental changes such as pH and ionic strength in water. Compared to other pH-responsive self-assembled systems based on "classical" polyelectrolytes, these polypeptide-based nanostructures present the ability to give a response in highly salted media as the chain conformational ordering can be controlled. This makes these micelles and vesicles suitable for biological applications: they provide significant advantages in the control of the structure and function of supramolecular self-assemblies.

Biopolymers↗

AFM study of micelle chaining in surface films of polystyrene-block-poly(ethylene oxide) stars at the air/water interface.

A series of three-arm star block copolymers were examined using atomic force microscopy (AFM). These stars consisted of a polystyrene core composed of ca. 111 styrene units/branch with poly(ethylene oxide) (PEO) chains at the star periphery. Each star contained different amounts of PEO, varying from 107 to 415 ethylene oxide units/branch. The stars were spread as thin films at the air/water interface on a Langmuir trough and transferred onto mica at various surface pressures. Circular domains representing 2D micelle-like aggregated molecules were observed at low pressures. Upon further compression, these domains underwent additional aggregation in a systematic manner, including micellar chaining. At this point, domain area and the number of molecules/domain increased with increasing pressure. In addition, it was found that longer PEO chains led to greater intermolecular separation and less aggregation. These AFM results correspond to attributes seen in the surface pressure-area isotherms of the stars. In addition, they demonstrate the viability of AFM as a quantitative characterization technique.

Journal Article↗

Towards an easy access to amphiphilic rod-coil miktoarm star copolymers.

Water-soluble stimuli-responsive AB2 miktoarm star copolymers were prepared by atom transfer radical polymerisation of styrene followed by chain-end modification, polymerisation of either gamma-benzyl-L-glutamate N-carboxyanhydride or tert-butylacrylate and a final step of hydrolysis.

Electrons↗

Synthesis of hybrid dendrimer-star polymers by the RAFT process.

A first generation phosphorus-containing dendrimer with twelve terminal benzyl dithiobenzoate functions was designed and subsequently used as a multifunctional agent to derive hybrid star copolymers consisting of a dendritic core surrounded by twelve polystyrene branches by reversible addition-fragmentation chain transfer (RAFT).

Journal Article↗