PubMed Health⌕ Search

Biomedical subjects

Z Berkovitch-Yellin

Publications and source records attributed to Z Berkovitch-Yellin.

8 recordsLinked to original sources
PubMed1997

Three-dimensional image reconstruction of large nuclear RNP (lnRNP) particles by automated electron tomography.

Nuclear RNA transcripts of split genes and their splicing products, as well as the general population of nuclear polyadenylated RNA are packaged in multi-component large nuclear ribonucleoprotein (lnRNP) particles. These lnRNP particles, which sediment at the 200 S region in sucrose gradients, contain all U small nuclear RNPs required for precursor messenger RNA (pre-mRNA) splicing and several protein splicing factors, including U2AF and the SR proteins. Electron microscopy of lnRNP particles revealed a large compact structure of 50 nm in diameter. In this study we employed automated computed tomography from electron micrographs for the three-dimensional (3D) image reconstruction of individual lnRNP particles isolated from mammalian cells nuclei and negatively stained. For each particle, a tilt series of 71 images was collected by direct digital recording of the images on a CCD camera attached to a computer controlled TEM facility. The 3D image was reconstructed according to the back projection principle. For rendering, real time display and comparison of the reconstructed particles, interactive computer graphics was employed. The reconstructed 3D images show a compact structure composed of four major subunits connected to each other. Comparison of the reconstructed lnRNP particles revealed morphological similarity of the individual particles, as well as similarity among the sub-structures. Based on these observations we propose a model for the packaging of nuclear pre-mRNAs in lnRNP particles where each substructure represents a functional unit. This model is compatible with the requirements for alternative splicing in multi-intronic pre-mRNAs, and with the fact that the splicing of multi-intronic pre-mRNAs does not occur in a sequential manner.

Animals↗
PubMed1997

Automated electron tomography of large nuclear RNP (InRNP) particles--the naturally assembled complexes of precursor messenger RNA and splicing factors.

Splicing of nuclear pre-mRNA is an important step in the regulation of gene expression as only correctly spliced mRNAs will be exported to the cytoplasm to function in protein synthesis. Nuclear RNA transcripts of split genes and their splicing products, as well as the general population of nuclear polyadenylated RNA, are packaged in multicomponent large nuclear ribonucleoprotein (lnRNP) particles. These lnRNP particles, which sediment at the 200S region in sucrose gradients, contain all U snRNPs required for pre-mRNA splicing and several protein splicing factors, including U2AF and the SR proteins and can thus be viewed as naturally assembled complexes of pre-mRNA and splicing factors. We have previously reconstructed the three-dimensional image of negatively stained individual lnRNP particles by automated electron tomography. The reconstruction revealed a compact structure, 50 nm in diameter, composed of four major subunits. Here we further analyzed the reconstructed models and the apparent connectivity between the subunits using a new rendering technique. The uniformity of the lnRNP particles was substantiated by measurement of the volume engulfed by their surface. This study further supports the model proposed for the packaging of nuclear pre-mRNAs in lnRNP particles, where each substructure represents a functional unit. This model is compatible with the requirements for alternative splicing in multiintronic pre-mRNAs, and with the fact that the splicing of multiintronic pre-mRNAs does not occur in a sequential manner.

Animals↗
PubMed1991

Characterization and preliminary attempts for derivatization of crystals of large ribosomal subunits from Haloarcula marismortui diffracting to 3 A resolution.

An improved form of crystals of large (50 S) ribosomal subunits from Haloarcula marismortui, formally named Halobacterium marismortui, diffracting to 3 A resolution, has been obtained by the addition of 1 mM-Cd2+ to the crystallization medium, which contained more than 1.9 M of other salts. The improved crystals, grown from functionally active particles to an average size of 0.3 mm x 0.3 mm x 0.08 mm, are isomorphous with the previously reported ones, which diffracted to 4.5 A. They are of space group C222(1), cell dimensions a = 210 A, b = 300 A, c = 581 A, and contain one particle in the asymmetric unit. Their superior internal order is reflected not only in their high resolution, but also in their reasonable mosaicity (less than 0.3 degrees). In contrast to the previously grown crystals, the new ones are of adequate mechanical strength and survive well the shock-cooling treatment. Due to their weak diffracting power, all crystallographic studies have been performed with synchrotron radiation. At cryotemperature, these crystals showed no measurable decay for a few days of irradiation and a complete diffraction data set could be collected from a single crystal. Efforts for initial phasing by specific and quantitative derivatization with super-dense heavy-atom clusters are in progress.

Crystallization↗
PubMed1990

Characterization and preliminary crystallographic studies on large ribosomal subunits from Thermus thermophilus.

Diffracting crystals, suitable for X-ray crystallographic analysis, have been obtained from large (50 S) ribosomal subunits from Thermus thermophilus. These crystals, with P4(1)2(1)2 symmetry and a unit cell of 495 A x 495 A x 196 A, reach typically a size of 0.15 mm x 0.25 mm x 0.35 mm. Using synchrotron radiation at cryo-temperature, these crystals diffract X-rays to better than 9 A resolution, and do not show any measurable decay after a few days of irradiation. They complete a series of crystals, grown by us, from ribosomal particles of the same source, including a 30 S subunits, 70 S ribosomes and complexes of the latter with: (1) an oligomer of 35 uridine residues and (2) the same oligonucleotide together with approximately two Phe-tRNA(Phe) molecules. Crystallographic analysis of the various members of this series should provide information for investigating the conformational changes that take place upon the association of ribosomes from their subunits as well as upon binding of non-ribosomal components that participate in protein biosynthesis.

Crystallization↗
PubMed1990

Low-resolution models for ribosomal particles reconstructed from electron micrographs of tilted two-dimensional sheets.

Models of the whole ribosome (70S) and its large subunit (50S) were obtained at low resolution (47 and 28 A respectively) by three-dimensional image reconstruction using diffraction data collected from electron micrographs of two-dimensional ordered arrays. The comparison of the various reconstructed images, using interactive computer graphics, enabled the assessment of the reliability of the method, the derivation of the shape of the small subunit (30S) and the assignment of several functional features such as the probable path taken by the nascent protein chain, the presumed site for the process of biosynthesis of proteins, and a feasible mode for tRNA binding. The reconstructed models of the various ribosomal particles may be used for phasing of X-ray diffraction data at low resolution.

Chemical Phenomena↗
PubMedDate not supplied

The interplay between X-ray crystallography, neutron diffraction, image reconstruction, organo-metallic chemistry and biochemistry in structural studies of ribosomes.

Crystals of ribosomes, their complexes with components of protein biosynthesis, their natural, mutated and modified subunits, have been subjected to X-ray and neutron crystallographic analyses. Electron microscopy and 3-dimensional image reconstruction, supported by biochemistry, genetic, functional and organo-metallic studies were employed for facilitating phasing of the crystallographic data. For example, a monofunctional multi heavy-atom cluster (undecagold) was designed for covalent and quantitative binding to ribosomes. The modified particles were crystallized isomorphously with the native ones. Their difference-Patterson maps contain indications for the usefulness of these derivatives for subsequent phasing. Models of the ribosome and its large subunit were reconstructed from tilt series of 2-dimensional sheets. The comparison of the various reconstructed images enabled an initial assessment of the reliability of these models and led to tentative assignments of several functional features. These include the presumed sites for binding mRNA and for codon-anticodon interactions, the path taken by the nascent protein chain and the mode for tRNA binding to ribosomes. These assignments assisted in the design of biologically meaningful crystal systems. The reconstructed models are being used to identify structural features in initial density maps derived from X-ray and neutron diffraction data.

Crystallography↗
PubMedDate not supplied

A milestone in ribosomal crystallography: the construction of preliminary electron density maps at intermediate resolution.

Preliminary electron density maps of the large and the small ribosomal particles from halophilic and thermophilic sources, phased by the isomorphous replacement method, have been constructed at intermediate resolution. These maps contain features comparable in size with what is expected for the corresponding particles, and their packing arrangements are in accord with the schemes obtained by ab-initio procedures as well as with the motifs observed in thin sections of the crystals by electron microscopy. To phase higher resolution data, procedures are being developed for derivatization by specific labeling of the ribosomal particles at selected locations with rather small and dense clusters. Potential binding sites are being inserted either by site directed mutagenesis or by chemical modifications to facilitate cluster binding on the surface of the halophilic large and the thermophilic small ribosomal particles, which yield the crystals diffracting to highest resolution (2.9 and 7.3 A (1 A = 0.1 nm), respectively). For this purpose, the surface of these ribosomal particles is being characterized and procedures are being developed for quantitative detachment of selected ribosomal proteins and for their incorporation into core particles. The genes of these proteins are being cloned, sequenced, mutated to introduce reactive side groups, mainly cysteines, and overexpressed. In parallel, two in situ small and stable complexes were isolated from the halophilic ribosome. Procedures for their crystal production in large quantities are currently being developed. Models, reconstructed at low resolution from crystalline arrays of ribosomes and their large subunits, are being used for initial low-resolution phasing of the X-ray amplitudes. The interpretation of these models stimulated the design and the crystallization of complexes mimicking defined functional states of a higher quality than those obtained for isolated ribosomes. These models also inspired modelling experiments according to results of functional studies, performed elsewhere, focusing on the progression of nascent proteins.

Base Sequence↗