PubMed Health⌕ Search

Biomedical subjects

Z Kelman

Publications and source records attributed to Z Kelman.

At least 19 recordsLinked to original sources
PubMed1999

Isolation and characterization of a split B-type DNA polymerase from the archaeon Methanobacterium thermoautotrophicum deltaH.

We describe here the isolation and characterization of a B-type DNA polymerase (PolB) from the archaeon Methanobacterium thermoautotrophicum DeltaH. Uniquely, the catalytic domains of M. thermoautotrophicum PolB are encoded from two different genes, a feature that has not been observed as yet in other polymerases. The two genes were cloned, and the proteins were overexpressed in Escherichia coli and purified individually and as a complex. We demonstrate that both polypeptides are needed to form the active polymerase. Similar to other polymerases constituting the B-type family, PolB possesses both polymerase and 3'-5' exonuclease activities. We found that a homolog of replication protein A from M. thermoautotrophicum inhibits the PolB activity. The inhibition of DNA synthesis by replication protein A from M. thermoautotrophicum can be relieved by the addition of M. thermoautotrophicum homologs of replication factor C and proliferating cell nuclear antigen. The possible roles of PolB in M. thermoautotrophicum replication are discussed.

Amino Acid Sequence↗
PubMed1999

The C-terminal region of Schizosaccaromyces pombe proliferating cell nuclear antigen is essential for DNA polymerase activity.

Proliferating cell nuclear antigen (PCNA), the processivity factor (sliding clamp) of DNA polymerases (Pols), plays essential roles in DNA metabolism. In this report, we examined the functional role of the C-terminal region of Schizosaccaromyces pombe PCNA both in vitro and in vivo. The deletion or Ala substitution of the last 9 aa (252-260A), as well as Ala replacement of only 4 aa (252-255A) at the C terminus, failed to substitute for the wild-type PCNA protein for cell growth in S. pombe. Two other PCNA mutant proteins, A251V and K253E, exhibited cold-sensitive phenotypes. Several yeast strains harboring mutations, including those at the acidic C-terminal region, showed elevated sensitivity to DNA damage. The ability of the mutant PCNA proteins to stimulate DNA synthesis by Poldelta and Polepsilon also was studied in vitro. The mutant proteins that did not support cell growth and a mutant protein containing a single amino acid substitution at position 252, where Pro is replaced by Ala, stimulated Poldelta and Polepsilon activities poorly. All mutant PCNA proteins, however, were assembled around DNA by the clamp loader, replication factor C, efficiently. Thus, the C-terminal region of PCNA is important for interactions with both Poldelta and Polepsilon and for cell survival after DNA damage. The C terminus of sliding clamps from other organisms has been shown to be important for clamp loading as well as polymerase interactions. The relationship between the conserved sequence in this region in different organisms is discussed.

Amino Acid Sequence↗
PubMed1999

Studies on the interactions between human replication factor C and human proliferating cell nuclear antigen.

Proliferating cell nuclear antigen (PCNA) is a processivity factor required for DNA polymerase delta (or epsilon)-catalyzed DNA synthesis. When loaded onto primed DNA templates by replication factor C (RFC), PCNA acts to tether the polymerase to DNA, resulting in processive DNA chain elongation. In this report, we describe the identification of two separate peptide regions of human PCNA spanning amino acids 36-55 and 196-215 that bind RFC by using the surface plasmon resonance technique. Site-directed mutagenesis of residues within these regions in human PCNA identified two specific sites that affected the biological activity of PCNA. Replacement of the aspartate 41 residue by an alanine, serine, or asparagine significantly impaired the ability of PCNA to (i) support the RFC/PCNA-dependent polymerase delta-catalyzed elongation of a singly primed DNA template; (ii) stimulate RFC-catalyzed DNA-dependent hydrolysis of ATP; (iii) be loaded onto DNA by RFC; and (iv) activate RFC-independent polymerase delta-catalyzed synthesis of poly dT. Introduction of an alanine at position 210 in place of an arginine also reduced the efficiency of PCNA in supporting RFC-dependent polymerase delta-catalyzed elongation of a singly primed DNA template. However, this mutation did not significantly alter the ability of PCNA to stimulate DNA polymerase delta in the absence of RFC but substantially lowered the efficiency of RFC-catalyzed reactions. These results are in keeping with a model in which surface exposed regions of PCNA interact with RFC and the subsequent loading of PCNA onto DNA orients the elongation complex in a manner essential for processive DNA synthesis.

Amino Acid Substitution↗
PubMed1999

The internal workings of a DNA polymerase clamp-loading machine.

Replicative DNA polymerases are multiprotein machines that are tethered to DNA during chain extension by sliding clamp proteins. The clamps are designed to encircle DNA completely, and they are manipulated rapidly onto DNA by the ATP-dependent activity of a clamp loader. We outline the detailed mechanism of gamma complex, a five-protein clamp loader that is part of the Escherichia coli replicase, DNA polymerase III holoenzyme. The gamma complex uses ATP to open the beta clamp and assemble it onto DNA. Surprisingly, ATP is not needed for gamma complex to crack open the beta clamp. The function of ATP is to regulate the activity of one subunit, delta, which opens the clamp simply by binding to it. The delta' subunit acts as a modulator of the interaction between delta and beta. On binding ATP, the gamma complex is activated such that the delta' subunit permits delta to bind beta and crack open the ring at one interface. The clamp loader-open clamp protein complex is now ready for an encounter with primed DNA to complete assembly of the clamp around DNA. Interaction with DNA stimulates ATP hydrolysis which ejects the gamma complex from DNA, leaving the ring to close around the duplex.

Adenosine Triphosphate↗
PubMed1999

Trading places on DNA--a three-point switch underlies primer handoff from primase to the replicative DNA polymerase.

This study reports a primase-to-polymerase switch in E. coli that closely links primase action with extension by DNA polymerase III holoenzyme. We find that primase tightly grips its RNA primer, protecting it from the action of other proteins. However, primase must be displaced before the beta sliding clamp can be assembled on the primed site. A single subunit of the holoenzyme, chi, is dedicated to this primase displacement task. The displacement mechanism depends on a third protein, SSB. Primase requires contact to SSB for its grip on the primed site. The chi subunit also binds SSB, upon which the primase-to-SSB contact is destabilized leading to dissociation of primase and assembly of beta onto the RNA primer. The conservation of this three-point switch, in which two proteins exchange places on DNA via mutually exclusive interaction with a third protein, is discussed.

DNA↗
PubMed1998

Devoted to the lagging strand-the subunit of DNA polymerase III holoenzyme contacts SSB to promote processive elongation and sliding clamp assembly.

Escherichia coli DNA polymerase III holoenzyme contains 10 different subunits which assort into three functional components: a core catalytic unit containing DNA polymerase activity, the beta sliding clamp that encircles DNA for processive replication, and a multisubunit clamp loader apparatus called gamma complex that uses ATP to assemble the beta clamp onto DNA. We examine here the function of the psi subunit of the gamma complex clamp loader. Omission of psi from the holoenzyme prevents contact with single-stranded DNA-binding protein (SSB) and lowers the efficiency of clamp loading and chain elongation under conditions of elevated salt. We also show that the product of a classic point mutant of SSB, SSB-113, lacks strong affinity for psi and is defective in promoting clamp loading and processive replication at elevated ionic strength. SSB-113 carries a single amino acid replacement at the penultimate residue of the C-terminus, indicating the C-terminus as a site of interaction with psi. Indeed, a peptide of the 15 C-terminal residues of SSB is sufficient to bind to psi. These results establish a role for the psi subunit in contacting SSB, thus enhancing the clamp loading and processivity of synthesis of the holoenzyme, presumably by helping to localize the holoenzyme to sites of SSB-coated ssDNA.

Binding Sites↗
PubMed1998

Processivity of DNA polymerases: two mechanisms, one goal.

Replicative DNA polymerases are highly processive enzymes that polymerize thousands of nucleotides without dissociating from the DNA template. The recently determined structure of the Escherichia coli bacteriophage T7 DNA polymerase suggests a unique mechanism that underlies processivity, and this mechanism may generalize to other replicative polymerases.

Bacteriophage T4↗
PubMed1998

Protein-PCNA interactions: a DNA-scanning mechanism?

Proliferating-cell nuclear antigen (PCNA) plays an essential role in nucleic-acid metabolism in all eukaryotes. The PCNA protein interacts with a large number of proteins. These proteins can be divided into two groups: the first contains proteins that have a known enzymatic activity; the second contains regulatory proteins that are involved in cell-cycle progression, checkpoint control and cellular differentiation. Interestingly, all of the enzymes known to interact with PCNA either recognize specific structures on DNA or have limited DNA-sequence specificity. Proteins that have low sequence specificities could utilize PCNA as an adapter in order to interact with their DNA substrates.

Animals↗
PubMed1997

DNA polymerase delta isolated from Schizosaccharomyces pombe contains five subunits.

DNA polymerase delta (pol delta) plays an essential role in DNA replication, repair, and recombination. We have purified pol delta from Schizosaccharomyces pombe more than 10(3)-fold and demonstrated that the polymerase activity of purified S. pombe pol delta is completely dependent on proliferating cell nuclear antigen and replication factor C. SDS/PAGE analysis of the purified fraction indicated that the pol delta complex consists of five subunits that migrate with apparent molecular masses of 125, 55, 54, 42, and 22 kDa. Western blot analysis indicated that the 125, 55, and 54 kDa proteins are the large catalytic subunit (Pol3), Cdc1, and Cdc27, respectively. The identity of the other two subunits, p42 and p22, was determined following proteolytic digestion and sequence analysis of the resulting peptides. The peptide sequences derived from the p22 subunit indicated that this subunit is identical to Cdm1, previously identified as a multicopy suppressor of the temperature-sensitive cdc1-P13 mutant, whereas peptide sequences derived from the p42 subunit were identical to a previously uncharacterized ORF located on S. pombe chromosome 1.

Amino Acid Sequence↗
PubMed1997

PCNA: structure, functions and interactions.

Proliferating cell nuclear antigen (PCNA) plays an essential role in nucleic acid metabolism as a component of the replication and repair machinery. This toroidal-shaped protein encircles DNA and can slide bidirectionally along the duplex. One of the well-established functions for PCNA is its role as the processivity factor for DNA polymerase delta and epsilon. PCNA tethers the polymerase catalytic unit to the DNA template for rapid and processive DNA synthesis. In the last several years it has become apparent that PCNA interacts with proteins involved in cell-cycle progression which are not a part of the DNA polymerase apparatus. Some of these interactions have a direct effect on DNA synthesis while the roles of several other interactions are not fully understood. This review summarizes the structural features of PCNA and describes the diverse functions played by the protein in DNA replication and repair as well as its possible role in chromatin assembly and gene transcription. The PCNA interactions with different cellular proteins and the importance of these interactions are also discussed.

Animals↗
PubMed1997

The influence of the proliferating cell nuclear antigen-interacting domain of p21(CIP1) on DNA synthesis catalyzed by the human and Saccharomyces cerevisiae polymerase delta holoenzymes.

In eukaryotes, processive DNA synthesis catalyzed by DNA polymerases delta and epsilon (pol delta and epsilon) requires the proliferating cell nuclear antigen (PCNA). It has recently been shown that in humans (h), the PCNA function, required for both DNA replication and nucleotide excision repair, can be inactivated by p21(CIP1) due to a specific interaction between hPCNA and the carboxyl terminus of p21(CIP1). In this report, we show that Saccharomyces cerevisiae (S. cerevisiae) PCNA-dependent pol delta-catalyzed DNA synthesis was inhibited less efficiently than the human system by the intact p21(CIP1) protein and was unaffected by the p21(CIP1) carboxyl-terminal peptide (codons 139-160). This species-specific response of PCNA to p21(CIP1)-mediated inhibition of DNA synthesis results from a marked difference in the ability of h and S. cerevisiae PCNA to interact with p21(CIP1). As shown by binding studies using the surface plasmon resonance technique, hPCNA binds both full-length p21(CIP1) and the p21(CIP1) peptide-(139-160) stoichiometrically with a similar affinity (KD approximately 2.5 nM) while S. cerevisiae PCNA binds p21(CIP1) with approximately 10-fold less affinity and does not interact with the p21(CIP1) peptide-(139-160).

Cyclin-Dependent Kinase Inhibitor p21↗
PubMed1996

Dynamics of loading the beta sliding clamp of DNA polymerase III onto DNA.

A "minimal" DNA primer-template system, consisting of an 80-mer template and 30-mer primer, supports processive DNA synthesis by DNA polymerase III core in the presence of the beta sliding clamp, gamma complex clamp loader, and single-stranded binding protein from Escherichia coli. This primer-template system was used to measure the loading of the beta sliding clamp by the gamma complex in an ATP-dependent reaction. Bound protein-DNA complexes were detected by monitoring fluorescence depolarization of DNA. Steady state and time-resolved anisotropies were measured, and stopped-flow pre-steady state fluorescence measurements allowed visualization of the loading reactions in real time. The rate of loading beta onto DNA was 12 s-1, demonstrating that clamp assembly is rapid on the time scale required for lagging strand Okazaki fragment synthesis. The association rate appears to be limited by an intramolecular step occurring prior to the clamp-loading reaction, possibly the opening of the toroidal beta dimer.

Adenosine Triphosphate↗
PubMed1996

Structure of the C-terminal region of p21(WAF1/CIP1) complexed with human PCNA.

The crystal structure of the human DNA polymerase delta processivity factor PCNA (proliferating cell nuclear antigen) complexed with a 22 residue peptide derived from the C-terminus of the cell-cycle checkpoint protein p21(WAF1/CIP1) has been determined at 2.6 angstrom resolution. p21 binds to PCNA in a 1:1 stoichiometry with an extensive array of interactions that include the formation of a beta sheet with the interdomain connector loop of PCNA. An intact trimeric ring is maintained in the structure of the p21-PCNA complex, with a central hole available for DNA interaction. The ability of p21 to inhibit the action of PCNA is therefore likely to be due to its masking of elements on PCNA that are required for the binding of other components of the polymerase assembly.

Amino Acid Sequence↗
PubMed1996

Clamp loading, unloading and intrinsic stability of the PCNA, beta and gp45 sliding clamps of human, E. coli and T4 replicases.

BACKGROUND: The high speed and processivity of replicative DNA polymerases reside in a processivity factor which has been shown to be a ring-shaped protein. This protein ("sliding clamp') encircles DNA and tethers the catalytic unit to the template. Although in eukaryotic, prokaryotic and bacteriophage-T4 systems, the processivity factors are ring-shaped, they assume different oligomeric states. The Escherichia coli clamp (the beta subunit) is active as a dimer while the eukaryotic and T4 phage clamps (PCNA and gp45, respectively) are active as trimers. The clamp can not assemble itself on DNA. Instead, a protein complex known as a clamp loader utilizes ATP to assemble the ring around the primer-template. This study compares properties of the human PCNA clamp with those of E. coli and T4 phage. RESULTS: The PCNA ring is a stable trimer down to a concentration below 100 nM (Kd approximately 21 nM). On DNA, the PCNA clamp slides freely and dissociates from DNA slowly (t1/2 approximately 24 min). beta is more stable in solution (Kd < 60 PM) and on DNA (t1/2 approximately 1 h) than PCNA which may be explained by its simpler oligomeric state. The T4 gp45 clamp is a much less stable trimer than PCNA (Kd approximately 250 nM) and requires association with the polymerase to stabilize it on DNA as observed previously. The consequence of this cooperation between clamp and polymerase is that upon finishing a template and dissociation of the polymerase from DNA, the gp45 clamp spontaneously dissociates from DNA without assistance. However, the greater stability of the PCNA and beta clamps on DNA necessitates an active process for their removal. The clamp loaders (RFC and gamma complex) were also capable of unloading their respective clamps from DNA in the presence of ATP. CONCLUSIONS: The stability of the different clamps in solution correlates with their stability on DNA. Thus, the low stability of the T4 clamp explains the inability to isolate gp45 on DNA. The stability of the PCNA and beta clamps predicts they will require an unloading factor to recycle them on and off DNA during replication. The clamp loaders of PCNA and beta double as clamp unloaders presumably for the purpose of clamp recycling.

Bacteriophage T4↗
PubMed1995

Escherichia coli expression vectors containing a protein kinase recognition motif, His6-tag and hemagglutinin epitope.

Escherichia coli expression vectors, based on the pET system, were constructed to allow fusion of a protein kinase (PK) recognition motif, a hemagglutinin (HG) epitope-tag and a His6-tag at the N-terminal portion of a protein of interest. The fusion proteins, that result from expression using these vectors, can be phosphorylated in vitro using cAMP-dependent PK, immunoprecipitated using monoclonal antibody against the HG-epitope, and can be rapidly purified using a Ni2+ column.

Amino Acid Sequence↗
PubMed1995

Protein structure. Why have six-fold symmetry?

Why do proteins proteins that encircle DNA have six-fold symmetry? One important factor may be the economy in protein mass with which DNA can be encircled by six globular subunits arranged in a ring.

Animals↗
PubMed1995

Structural and functional similarities of prokaryotic and eukaryotic DNA polymerase sliding clamps.

The remarkable processivity of cellular replicative DNA polymerases derive their tight grip to DNA from a ring-shaped protein that encircles DNA and tethers the polymerase to the chromosome. The crystal structures of prototypical 'sliding clamps' of prokaryotes (beta subunit) and eukaryotes (PCNA) are ring shaped proteins for encircling DNA. Although beta is a dimer and PCNA is a trimer, their structures are nearly superimposable. Even though they are not hexamers, the sliding clamps have a pseudo 6-fold symmetry resulting from three globular domains comprising each beta monomer and two domains comprising each PCNA monomer. These domains have the same chain fold and are nearly identical in three-dimensions. The amino acid sequences of 11 beta and 13 PCNA proteins from different organisms have been aligned and studied to gain further insight into the relation between the structure and function of these sliding clamps. Furthermore, a putative embryonic form of PCNA is the size of beta and thus may encircle DNA as a dimer like the prokaryotic clamps.

Amino Acid Sequence↗