PubMed Health⌕ Search

Biomedical subjects

Zeev Rosenzweig

Publications and source records attributed to Zeev Rosenzweig.

17 recordsLinked to original sources

Luminescent quantum dots fluorescence resonance energy transfer-based probes for enzymatic activity and enzyme inhibitors.

The paper describes the development and characterization of analytical properties of quantum dot-based probes for enzymatic activity and for screening enzyme inhibitors. The luminescent probes are based on fluorescence resonance energy transfer (FRET) between luminescent quantum dots that serve as donors and rhodamine acceptors that are immobilized to the surface of the quantum dots through peptide linkers. Peptide-coated CdSe/ZnS quantum dots were prepared using a one-step ligand exchange process in which RGDC peptide molecules replace trioctylphosphine oxide (TOPO) molecules as the capping ligands of the quantum dots. The peptide molecules were bound to the surface of the CdSe/ZnS quantum dots through the thiol group of the peptide cysteine residue. The peptide-coated quantum dots were labeled with rhodamine to form the FRET probes. The emission quantum yield of the quantum dot FRET probes was 4-fold lower than the emission quantum yield of TOPO-capped quantum dots. However, the quantum dot FRET probes were sufficiently bright to enable quantitative enzyme and enzyme inhibition assays. The probes were used first to test the enzymatic activity of trypsin in solution based on FRET signal changes of the quantum dot-based enzymatic probes in the presence of proteolytic enzymes. For example, exposure of the quantum dot FRET probes to 500 microg/mL trypsin for 15 min resulted in 60% increase in the photoluminescence of the quantum dots and a corresponding decrease in the emission of the rhodamine molecules. These changes resulted from the release of rhodamine molecules from the surface of the quantum dots due to enzymatic cleavage of the peptide molecules. The quantum dot FRET-based probes were used to monitor the enzymatic activity of trypsin and to screen trypsin inhibitors for their inhibition efficiency.

Cadmium Compounds↗

Synthesis and application of quantum dots FRET-based protease sensors.

Preparation of FRET-based quantum dots as protease sensors-RGDC peptide molecules are bound to the surface of CdSe/ZnS quantum dots. The peptide molecules are then labeled with rhodamine dye molecules. The emission color of the quantum dots change from green to orange due to fluorescence resonance energy transfer (FRET) between the quantum dots and the bound rhodamine molecules. Cleavage of the peptide by selective proteases releases the rhodamine molecules from the quantum dots surface, which results in decreasing FRET efficiency between the quantum dots and the rhodamine molecules. The emission color of the quantum dots changes back to green.

Enzyme Activation↗

Fluorescence-based zinc ion sensor for zinc ion release from pancreatic cells.

In this paper, we describe the synthesis and characterization of analytical properties of fluorescence-based zinc ion-sensing glass slides and their application in monitoring zinc ion release from beta pancreatic cells in cell cultures. To fabricate the sensors, the zinc ion indicator ZnAF-2 {6-[N-[N',N'-bis(2-pyridinylmethyl)-2-aminoethyl]amino-3',6'-dihydroxyspiro[isobenzofuran-1(3H),9'-[9H]xanthene]-3-one} was modified to include a sufficiently long linking aliphatic chain with a terminal carboxyl functional group. The recently synthesized ZnAF-2 zinc ion indicator provided high zinc ion selectivity in physiological solutions containing millimolar levels of calcium and other possible interfering cations. The carboxyl-modified ZnAF-2 was conjugated to the activated surface of glass slides, which then served as zinc ion sensors. It was possible to grow pancreatic cells directly on the zinc-sensing glass slide or on a membrane placed on these glass slides. The sensors were used to monitor zinc ion release events from glucose-stimulated pancreatic cells. The study showed that the zinc ion sensors responded effectively to the release of zinc ions from pancreatic cells at the nanomolar level with high selectivity and rapid subsecond response time.

Animals↗

Effect of an oscillating magnetic field on the release properties of magnetic collagen gels.

The paper describes the effect of an oscillating magnetic field (OMF) on the morphology and release properties of collagen gels containing magnetic nanoparticles and microparticles and fluorescent drug analogues. Collagen gels were prepared through fibrillogenesis of collagen in the presence of iron oxide magnetic particles averaging 10 nm or 3 mum in diameter and rhodamine-labeled dextran (Dex-R) of molecular weights between 3000-70 000 g/mol. Dextran molecules effectively simulate protein-based drugs, since they have similar molecular weights and dimensions. The paper discusses the effect of an OMF on the release properties of the gels and proposes an empirical model to predict the release rate. It also demonstrates the self-repair capability of collagen gels following the structural damage caused by an OMF.

Animals↗

Fluorescent silica nanospheres for digital counting bioassay of the breast cancer marker HER2/neu [correction of HER2/nue].

This paper describes the use of fluorescent silica nanospheres as luminescent signal amplifiers in biological assays based on digital counting of individual particles instead of measuring averaged fluorescence intensity. We recently described a simple method to prepare highly fluorescent mono-dispersed silica nanospheres that avoids microemulsion formulations and the use of surfactants. Modification of the Stöber method was used successfully to prepare fluorescent silica spheres with the inorganic dye dichlorotris(1,10-phenanathroline)ruthenium (II) hydrate encapsulated during the condensation of tetraethylorthosilicate in ethanol and dye aqueous mixtures. Modifications in the ammonia and water content in the reaction mixture resulted in mono-dispersed silica spheres of 65, 440 and 800 nm in diameter. The dye-encapsulating particles emit intense red luminescence when excited at 460 nm. We observed an increased photostability and longer fluorescence lifetime in our particles that we attributed to increased protection of the encapsulated dye molecules from molecular oxygen. The newly prepared fluorescent silica particles were easily modified using trialkoxysilane reagents for covalent conjugation of anti-HER2/neu. We demonstrated the utility of the fluorescent nanospheres to detect the cancer marker HER2/neu in a glass slide based assay. The assay was shown to be simple but highly sensitive with a limit of detection approaching 1 ng/mL and a linear range between 1 ng/mL and 10 microg/mL of HER2/neu.

Binding, Competitive↗

Point-of-care biosensor systems for cancer diagnostics/prognostics.

With the growing number of fatalities resulting from the 100 or so cancer-related diseases, new enabling tools are required to provide extensive molecular profiles of patients to guide the clinician in making viable diagnosis and prognosis. Unfortunately with cancer-related diseases, there is not one molecular marker that can provide sufficient information to assist the clinician in making effective prognoses or even diagnoses. Indeed, large panels of markers must typically be evaluated that cut across several different classes (mutations in certain gene fragments--DNA; over/under-expression of gene activity as monitored by messenger RNAs; the amount of proteins present in serum or circulating tumor cells). The classical biosensor format (dipstick approach for monitoring the presence of a single element) is viewed as a valuable tool in many bioassays, but possesses numerous limitations in cancer due primarily to the single element nature of these sensing platforms. As such, if biosensors are to become valuable tools in the arsenal of the clinician to manage cancer patients, new formats are required. This review seeks to provide an overview of the current thinking on molecular profiling for diagnosis and prognosis of cancers and also, provide insight into the current state-of-the-art in the biosensor field and new strategies that must be considered to bring this important technology into the cancer field.

Biomarkers, Tumor↗

Manipulation of the magnetic properties of magnetite-silica nanocomposite materials by controlled Stober synthesis.

The paper describes the synthesis and characterization of the magnetic properties of magnetite/silica nanocomposites using a modified Stober method. Magnetite nanoparticles averaging 8-10 nm in diameter and stabilized with oleic acid in toluene were used as the magnetic component of the nanocomposites. SQUID magnetic measurements and ferromagnetic resonance spectroscopy measurements were performed at each stage of the synthesis to understand the properties of the formed composites. Changes of blocking temperature in ZFC/FC SQUID curves correlated with corresponding changes of the resonance field in the ferromagnetic spectra of the sample at each stage of formation. The paper concludes that it is possible to manipulate the magnetic properties of silica/magnetite composite materials by controlling their surface properties and silica coating thickness.

Journal Article↗

Stöber synthesis of monodispersed luminescent silica nanoparticles for bioanalytical assays.

We have developed a simple method to prepare bright and photostable luminescent silica nanoparticles of different sizes and narrow size distribution in high yield. The method is based on the use of Stöber synthesis in the presence of a fluorophore to form bright silica nanoparticles. Unlike micro-emulsion-based methods often used to prepare luminescent silica particles, the Stöber method is a one-pot synthesis that is carried out at room temperature under alkaline conditions in ethanol:water mixtures and avoids the use of potentially toxic organic solvents and surfactants. Our luminescent particles contained the transition metal complex tris(1,10-phenanthroline) ruthenium(II) chloride, [Ru(phen)3]Cl2. They showed higher photostability and a longer fluorescence lifetime compared to free Ru(phen)3 solutions. Leakage of dye molecules from the silica particles was negligible, which was attributed to strong electrostatic attractions between the positively charged ruthenium complex and the negatively charged silica. To demonstrate the utility of the highly luminescent silica nanoparticles in bioassays, we further modified their surface with streptavidin and demonstrated their binding to biotinylated glass slides. The study showed that digital counting of the luminescent nanoparticles could be used as an attractive alternative to detection techniques involving analogue luminescence detection in bioanalytical assays.

Luminescence↗

Synthesis and analytical properties of micrometric biosensing lipobeads.

This paper describes the preparation for the first time of lipobead-based micrometric fluorescence biosensors and the optimization of their analytical properties. The study focused on the well-established urea biosensors as a model system. Fluorescence-sensing lipobeads were prepared by coating carboxyl-functionalized silica microspheres with phospholipids. The enzyme urease and the pH indicator fluorescein-5-thiosemicarbazide were then attached covalently to the phospholipid membrane of the lipobeads. Urease converts urea to ammonia, which results in a pH increase in the analyte solution and to a urea concentration-dependent increase in the fluorescence intensity of the sensing lipobeads. Previous fluorescence-sensing lipobeads were synthesized by coating polystyrene particles with a phospholipid membrane. The membrane was physically attached to the particles and the fluorophores were entrapped in the membrane. In this study, we prepared improved fluorescence-sensing lipobeads by utilizing covalent chemistry to bind the phospholipid membrane to the silica particles and the fluorophores to the membrane. This led to improvement in the stability of the newly developed urea-sensing lipobeads compared to previously developed miniaturized fluorescence biosensors.

Biosensing Techniques↗

Design, synthesis, and application of particle-based fluorescence resonance energy transfer sensors for carbohydrates and glycoproteins.

This paper describes the development of novel particle-based fluorescence resonance energy transfer (FRET) sensors to quantify the concentration and monitor the binding affinity of carbohydrates and glycoproteins to lectins, which are carbohydrate binding proteins. The sensing approach is based on FRET between fluorescein (donor)-labeled lectin molecules, adsorbed on the surface of micrometric polymeric beads, and polymeric dextran molecules labeled with Texas Red (acceptor). The FRET efficiency of the donor-acceptor pair decreases in the presence of carbohydrates or glycoproteins that compete with the Texas Red-labeled dextran molecules on the lectinic binding sites. The inhibitory effect is concentration and time dependent. The sensing technique enables the discrimination between carbohydrates and glycoproteins based on their binding affinity to the FRET sensing particles as well as quantitative analysis of carbohydrates and glycoproteins in aqueous samples. In the future, the newly developed sensors could enable screening glycoprotein-based drugs for their binding affinity toward selective receptors.

Biosensing Techniques↗

Glucose oxidase-magnetite nanoparticle bioconjugate for glucose sensing.

Immobilization of bioactive molecules on the surface of magnetic nanoparticles is of great interest, because the magnetic properties of these bioconjugates promise to greatly improve the delivery and recovery of biomolecules in biomedical applications. Here we present the preparation and functionalization of magnetite (Fe3O4) nanoparticles 20 nm in diameter and the successful covalent conjugation of the enzyme glucose oxidase to the amino-modified nanoparticle surface. Functionalization of the magnetic nanoparticle surface with amino groups greatly increased the amount and activity of the immobilized enzyme compared with immobilization procedures involving physical adsorption. The enzymatic activity of the glucose oxidase-coated magnetic nanoparticles was investigated by monitoring oxygen consumption during the enzymatic oxidation of glucose using a ruthenium phenanthroline fluorescent complex for oxygen sensing. The glucose oxidase-coated magnetite nanoparticles could function as nanometric glucose sensors in glucose solutions of concentrations up to 20 mmol L(-1). Immobilization of glucose oxidase on the nanoparticles also increased the stability of the enzyme. When stored at 4 degrees C the nanoparticle suspensions maintained their bioactivity for up to 3 months.

Amides↗

Submicrometric lipobead-based fluorescence sensors for chloride ion measurements in aqueous solution.

This paper describes the preparation and optimization of the analytical properties of fluorescence-based submicrometric chloride ion sensing lipobeads. Fluorescence sensing lipobeads are polystyrene nanoparticles that are coated with a phospholipid membrane that contains a fluorescent indicator for a targeted analyte. In this study, the halide-specific fluorescence dye, lucigenin, was immobilized into the phospholipid membrane of the lipobeads to enable chloride ion detection. The fluorescence intensity of lucigenin decreases with increasing chloride ion concentration due to dynamic quenching. Lipobeads that contained only lucigenin were ineffective as chloride ion sensors due to poor partition of the water-soluble lucigenin molecules into the phospholipid membrane and high leakage rate of immobilized lucigenin molecules to the aqueous solution. To stabilize the chloride ion sensing lipobeads we coimmobilized hexadecanesulfonate molecules into the phospholipid membrane. The formation of ion pairs between hexadecanesulfonate and lucigenin decreased the hydrophilicity of the dye, increased its partition rate into the membrane, increased the brightness of the particles, and significantly decreased the leakage rate of the hydrophobic ion pair from the membrane to the solution. To further improve their chloride ion sensitivity, we also immobilized the chloride ionophore [9] mercuracarborand-3 into the lipobead membrane. The study resulted in a unique submicrometric chloride ion sensor, which is suitable for chloride ion measurements in biological fluids.

Journal Article↗

Laser-based double beam absorption detection for aggregation immunoassays using gold nanoparticles.

A laser-based double beam absorption detection system for aggregation immunoassays has been developed. The assay was based on the aggregation of gold nanoparticles that are coated with protein antigens in the presence of their corresponding antibodies. The aggregation of the gold nanoparticles results in an absorption change that is monitored at 635 nm using the double beam spectrometer. The noise level of the spectrometer is 1x10(-6)arbitrary units. This corresponds to a tenfold improvement in comparison to commercial absorption detectors and is comparable with previously reported more complicated laser-based absorption spectrometers. The dye Nile-Blue-A was used to test the analytical performance of the system. A limit of detection of 3x10(-8 )M Nile-Blue-A was observed. The relative standard deviation between consecutive measurements was lower than 1.5%. The system is suitable for field applications of aggregation-based immunoassays.

Absorption↗

Luminescent CdS quantum dots as selective ion probes.

Water-soluble luminescent CdS quantum dots (QDs) capped by polyphosphate, L-cysteine, and thioglycerol were synthesized in aqueous solution. The ligands were found to have a profound effect on the luminesence response of CdS QDs to physiologically important metal cations. Polyphosphate-capped CdS QDs were sensitive to nearly all mono- and divalent cations, showing no ion selectivity. Conversely, thioglycerol-capped CdS QDs were sensitive to only copper and iron ions. Similar concentrations of physiologically relevant cations, such as zinc, sodium, potassium, calcium, and magnesium ions did not affect the luminescence of thioglycerol-capped CdS QDs. On the other hand, L-cysteine-capped CdS QDs were sensitive to zinc ions and insensitive to other physiologically important cations, such as copper, calcium, and magnium ions. To demonstrate the detection capability of these new ion probes, L-cysteine and thioglycerol-capped CdS QDs were used to detect zinc and copper ions in physiological buffer samples. The detection limits were 0.8 microM for zinc (II) and 0.1 microM for copper (II) ions. The emission enhancement of the QDs by zinc (II) is attributed to activation of surface states, whereas the effective reduction of copper (II) to copper (I) may explain the emission decrease of the thioglycerol-capped CdS QDs when charged with copper ions. Unlike organic fluorescent dyes, the thioglycerol-capped luminescent CdS QDs discriminate between copper and zinc ions and are therefore suitable for the analysis of copper ions in biological samples in the presence of physiological concentrations of zinc ions. The interference of iron ions with zinc and copper ion detection is attributed to an inner filter effect, which is eliminated by adding fluoride ions to form the colorless complex FeF6(3-). To the best of our knowledge, this is first use of luminescent semiconductor quantum dots as selective ion probes in aqueous samples.

Journal Article↗

Calcium ion fluorescence detection using liposomes containing Alexa-labeled calmodulin.

This paper describes the preparation and characterization of calcium ion sensitive fluorescent liposomes and their application for the determination of calcium ions in aqueous samples. Calmodulin (CaM), a calcium ion-binding protein labeled with the fluorophore Alexa-488 is embedded in the membrane of unilamellar liposomes. Upon calcium ion binding, calmodulin undergoes a conformational change that exposes its hydrophobic core and affects the fluorescence intensity of the attached fluorophore. Characterization studies of Alexa-CaM-containing liposomes reveal that embedding calmodulin molecules in the bilayer membrane of liposomes extends the lifetime of the calcium ion binding activity of calmodulin by about fourfold compared to the lifetime of its calcium-binding activity in free solution. Moreover, the calcium ion response of Alexa-CaM-containing liposomes is about threefold higher than the calcium ion response of Alexa-CaM in solution. The improvement in the calcium ion detection properties is attributed to the interaction between calmodulin, a membranal protein, and the hydrophobic phospholipids of the liposomes. The analytical properties of the calcium ion sensitive fluorescent liposomes are discussed.

Calcium↗

Development of an aggregation-based immunoassay for anti-protein A using gold nanoparticles.

A unique, sensitive, and highly specific immunoassay system for antibodies using gold nanoparticles has been developed. The assay is based on the aggregation of gold nanoparticles that are coated with protein antigens in the presence of their corresponding antibodies. The aggregation of the gold nanoparticles results in an absorption change at 620 nm that is monitored using an absorption plate reader. To demonstrate the analytical capabilities of the new technique, monodispersed protein A-coated gold particles, averaging 10 nm in diameter, were used to determine the level of anti-protein A in serum samples. The effects of the pH, the temperature, and the concentration of protein A-coated gold nanoparticles on the sensitivity of the assay were investigated using transmission electron microscopy (TEM) and UV/vis absorption spectroscopy. A dynamic range of 2 orders of magnitude and a limit of detection of 1 microg/mL of anti-protein A were observed. The new technique could be used for fast, high-throughput screening of antibodies in clinical diagnostic applications.

Animals↗

Novel fluorescent oxygen indicator for intracellular oxygen measurements.

Intracellular oxygen concentration is of primary importance in determining numerous physiological and pathological processes in biological systems. In this paper, we describe the application of the oxygen sensing indicator, ruthenium dibipyridine 4-(1"-pyrenyl)-2,2'-bipyridine chloride [Ru(bpy-pyr)(bpy)(2)], for molecular oxygen measurement in J774 murine macrophages. Ru(bpy-pyr)(bpy)(2) exhibits strong visible absorption, efficient fluorescence, long excited state lifetime, large Stokes shift, and high photo- and chemical stability. The fluorescence of Ru(bpy-pyr)(bpy)2 is efficiently quenched by molecular oxygen. It is 13 fold higher in a nitrogenated solution than in an oxygenated one. The dye passively permeates into cells and maintains its oxygen sensitivity for at least 5 h when the cells are stored in a phosphate buffered saline solution at pH 7.4. The oxygen sensitivity, photostability, and chemical stability of the indicator and the effect of hypoxia and hyperoxia on the intracellular oxygen level in single macrophages are discussed.

Animals↗