PubMed Health⌕ Search

Biomedical subjects

Zhanfeng Cui

Publications and source records attributed to Zhanfeng Cui.

At least 19 recordsLinked to original sources

Membrane fouling by cell-protein mixtures: in situ characterisation using multi-photon microscopy.

Fouling of the membrane by cell and protein mixtures can result in severe flux declines, leading to the eventual need to clean or replace the membrane. In this study multi-photon microscopy, a fluorescence-based technique is used to 3-D image in situ the fouling of microfiltration membranes by suspensions containing combinations of washed yeast, bovine serum albumin (BSA) and ovalbumin. Appropriate fluorescent labelling allows the three foulant species to be clearly identified. Images correlate well with filtration data and clearly show the cake of yeast cells capturing protein aggregates. The proteins exhibited very different filtration behaviour. When filtering washed yeast together with ovalbumin and/or a 50:50 mixture by mass of BSA and ovalbumin, the ovalbumin fouling dominates the system. Capture of aggregates by the cake did not reduce fouling of the membrane by the protein and increased the resistance of the cake. For mixtures of BSA and washed yeast, the presence of a cake of yeast cells did reduce fouling of the membrane by the protein, however, the extra resistance due to the cake resulted in a flux lower than that when filtering BSA alone.

Biofilms↗

Study of on-line monitoring of lactate based on optical fibre sensor and in-channel mixing mechanism.

A PDMS-based microfluidic device with integrated optical fibres was developed for online monitoring of lactate. The detection is based on the optical adsorption of the colour solution formed by in-channel mixing of sample and reagent solutions. Computational Fluid Dynamics (CFD) simulation and kinetic study of the colour development were conducted to determine the minimum channel length and optimum residential time for homogenous mixing and maximum optical adsorption respectively. The system was proved to be able to detect lactate with good linearity (R(2)=0.98), response time of about 130 s and estimated limitation of detection (LOD) of 0.52 mM (about 47 mg/L), which is sufficient for a general online lactate detection. Due to the miniaturization of sensing system and micro-scale mixing, higher detection sensitivity (0.15 V/mM) can be realized than the mixing in lab-scale equipments (0.08 V/mM).

Dimethylpolysiloxanes↗

Macrophage-mediated biodegradation of poly(DL-lactide-co-glycolide) in vitro.

Biodegradation of poly-DL-lactide-co-glycolide (PLGA) both in vitro and in vivo has been well documented. However, the roles that macrophages and their fused multinucleated giant cells (MNGCs) play in this biodegradation are still unclear. The current study aimed to investigate macrophage-mediated biodegradation of PLGA thin films and of PLGA composites with hydroxyapatite (HA) and tricalcium phosphate (TCP) ceramic powders in vitro using a murine macrophage cell line (RAW 264.7). The interactions were analyzed by using cell viability assays, scanning electron microscopy, and focused ion beam microscopy. The results showed that RAW 264.7 cells effectively attached and proliferated on the PLGA films and PLGA-HA, PLGA-TCP composites. The RAW 264.7 cells were observed to aggregate and fuse to form MNGCs. The cell processes on the membrane, or pseudopodia, penetrated into the PLGA films and evidently eroded the surface. We conclude that macrophages and fused MNGCs actively respond to PLGA films as substratum and degrade the surface of this polymer.

Animals↗

Monitoring of metabolite gradients in tissue-engineered constructs.

At present, the assessment of developing tissue-engineered constructs is almost always carried out destructively using biochemical or histological methods to determine cell number, viability and tissue growth throughout the construct. Since many of these experiments are long, taking weeks or even months to complete, simple and readily applicable non-destructive methods of monitoring changes in cell metabolism, viability and tissue deposition within the construct would be invaluable; such methods could point out adverse responses during the early stages of culture. Here, we describe the use of microdialysis for detecting local changes in cellular metabolism within a tissue-engineered construct. Three-dimensional constructs consisting of bovine articular chondrocytes entrapped in an alginate gel were cultured in a bioreactor for two weeks. Glucose and lactate were monitored by microdialysis, as the major nutrient and metabolite, respectively. Concentration gradients within the construct were evident, with the highest lactate concentrations in the construct centre. The local lactate concentration was a measure of cellular metabolic activity, decreasing as cellular activity fell and increasing as cellular activity was stimulated. Nutrient starvation and cell death in the construct centre could be readily detected in constructs deliberately cultured under adverse conditions. The results show that probe measurements can give an early warning of inappropriate local metabolic changes. Such information during the growth of tissue-engineered constructs would allow either corrective action or else an early end to an unsuccessful test.

Alginates↗

In situ three-dimensional characterization of membrane fouling by protein suspensions using multiphoton microscopy.

Fouling of microfiltration membranes leads to severe flux declines and the need to clean or replace the membrane. In situ 3D characterization of protein fouling both on the surface and within the pores of the membrane was achieved using multiphoton microscopy. Time-lapse images of the fouled membrane were obtained for single suspensions and mixtures of fluorescently labeled bovine serum albumin and ovalbumin. Deposited protein aggregates were visible on the membrane and evidently play an important role in fouling. A combination of 3D images and resistance versus time data was used to identify the dominant fouling mechanism. Fouling is initially internally dominated, but after 1 and 15 min for ovalbumin and bovine serum albumin, respectively, the fouling becomes externally dominated. This is in good agreement with two-stage protein fouling models.

Animals↗

Innate immune response to human bone marrow fibroblastic cell implantation in CB17 scid/beige mice.

Immunocompromised mouse models have been extensively used to assess human cell implantation for evaluation of cytotherapy, gene therapy and tissue engineering strategies, as these mice are deficient in T and B lymphoid cells. However, the innate immune response and its effect on human cell xenotransplantation in these mouse models are mainly unknown. The aim of this study is to characterise the myeloid populations in the spleen and blood of CB17 scid beige (CB17 sb) mice, and to study the inflammatory cell responses to xenogeneic implantation of enhanced green fluorescent protein (GFP)-labelled human bone marrow fibroblastic (HBMF) cells into CB17 sb mice. The results indicate that even though CB17 sb mice are deficient in B- and T-cells, they exhibit some increases in their monocyte (Mo), macrophage (Mphi) and neutrophil (Neu) populations. NK cell and eosinophil populations show no differences compared with wild-type Balb/C mice. An innate immune response, identified by CR3 (CD11b/CD18)-positive myeloid inflammatory cells and F4/80-positive macrophages, was evident in the tissues where HBMF cells were implanted. As a consequence, the majority of implanted HBMF cells were eliminated by 4 weeks after implantation. Interestingly, the mineralised matrix formed by osteogenic HBMF cells was also eroded by multinuclear Mphi-like giant cells. We conclude that CB17 sb mice retain active innate immune cells, which respond to HBMF cell xenotransplantation. This study highlights the importance of the innate immune cells in the anti-xenograft response and suggests that strategies to block the activities of these cells may ameliorate the progressive long-term elimination of xenotransplants.

Animals↗

Multiphoton high-resolution 3D imaging of Langerhans cells and keratinocytes in the mouse skin model adopted for epidermal powdered immunization.

Langerhans cells (LCs) can be targeted with DNA-coated gold micro-projectiles ("Gene Gun") to induce potent cellular and humoral immune responses. It is likely that the relative volumetric distribution of LCs and keratinocytes within the epidermis impacts on the efficacy of Gene Gun immunization protocols. This study quantified the three-dimensional (3D) distribution of LCs and keratinocytes in the mouse skin model with a near-infrared multiphoton laser-scanning microscope (NIR-MPLSM). Stratum corneum (SC) and viable epidermal thickness measured with MPLSM was found in close agreement with conventional histology. LCs were located in the vertical plane at a mean depth of 14.9 microm, less than 3 mum above the dermo-epidermal boundary and with a normal histogram distribution. This likely corresponds to the fact that LCs reside in the suprabasal layer (stratum germinativum). The nuclear volume of keratinocytes was found to be approximately 1.4 times larger than that of resident LCs (88.6 microm3). Importantly, the ratio of LCs to keratinocytes in mouse ear skin (1:15) is more than three times higher than that reported for human breast skin (1:53). Accordingly, cross-presentation may be more significant in clinical Gene Gun applications than in pre-clinical mouse studies. These interspecies differences should be considered in pre-clinical trials using mouse models.

Animals↗

Influence of perfusion on metabolism and matrix production by bovine articular chondrocytes in hydrogel scaffolds.

Articular cartilage has a limited capacity for self-repair after damage. Engineered cartilage is a promising treatment to replace or repair damaged tissue. The growth of engineered cartilage is sensitive to the extracellular culture environment. Chondrocytes were seeded into alginate beads and agarose scaffolds at 4 millions/mL, and the response to static and perfusion culture was examined over period of up to 12 days. For both types of scaffolds, the chondrocytes kept their differentiated morphology over 12 days in all culture conditions. In alginate beads, more glycosaminoglycans (GAGs) were produced in perfusion culture than in static conditions. GAG distribution in alginate constructs was more uniform in perfusion culture than in static culture. However, in agarose constructs there was no significant difference in GAG production between static culture and perfusion culture. Under perfusion culture, the retention rate of GAG in alginate was higher than in agarsoe. It is suggested that the positive effect of perfusion culture only can be achieved by an appropriate choice of other factors such as scaffold materials.

Alginates↗

Ex vivo expansion of hematopoietic stem cells derived from umbilical cord blood in rotating wall vessel.

Expansion of umbilical cord blood mononuclear cells (UCB MNCs) was carried out in a rotating wall vessel (RWV) bioreactor and tissue culture flasks (T-flasks) in serum-containing medium supplemented with relatively low doses of purified recombinant human cytokines (5.33 ng/ml IL-3, 16 ng/ml SCF, 3.33 ng/ml G-CSF, 2.13 ng/ml GM-CSF, 7.47 ng/ml FL and 7.47 ng/ml TPO) for 8 days. The cell density, pH and osmolality of the culture medium in the two culture systems were measured every 24h. Flow cytometric assay for CD34+ cells was carried out at 0, 144 and 197 h and methylcellulose colony assays were performed at 0, 72, 144 and 197 h. The pH and osmolality of the medium in the two culture systems were maintained in the proper ranges for hematopoietic stem cells (HSCs) and progenitors culture. The RWV bioreactor, combined with a cell-dilution feeding protocol, was efficient to expand UCB MNCs. At the end of 200 h culture, the total cell number was multiplied by 435.5+/-87.6 times, and CD34+ cells 32.7+/-15.6 times, and colony-forming units of granulocyte-macrophage (CFU-GM) 21.7+/-4.9 times. While in T-flasks, however, total cells density changed mildly, CD34+ cells and CFU-GM decreased in number. It is demonstrated that the RWV bioreactor can provide a better environment for UCB MNCs expansion, enhance the contact between HSCs and accessory cells and make the utilization of cytokines more effective than T-flask.

Bioreactors↗

Femtosecond two-photon high-resolution 3D imaging, spatial-volume rendering and microspectral characterization of immunolocalized MHC-II and mLangerin/CD207 antigens in the mouse epidermis.

Langerhans cells (LCs) play a sentinel role by initiating both adaptive and innate immune responses to antigens pertinent to the skin. With the discovery of various LCs markers including antibodies to major histocompatibility complex class II (MHC-II) molecules and CD1a, intracellular presence of racket-shaped "Birbeck granules," and very recently Langerin/CD207, LCs can be readily distinguished from other subsets of dendritic cells. Femtosecond two-photon laser scanning microscopy (TPLSM) in recent years has emerged as an alternative to the single photon-excitation based confocal laser scanning microscope (CLSM), particularly for minimally-invasive deep-tissue 3D and 4D vital as well as nonvital biomedical imaging. We have recently combined high resolution two-photon immunofluorescence (using anti MHC-II and Langerin/CD207 antibodies) imaging with microspectroscopy and advanced image-processing/volume-rendering modalities. In this work, we demonstrate the use of this novel state-of-the-art combinational approach to characterize the steady state 3D organization and spectral features of the mouse epidermis, particularly to identify the spatial distribution of LCs. Our findings provide unequivocal direct evidence that, in the mouse epidermis, the MHC-II and mLangerin/CD207 antigens do indeed manifest a high degree of colocalization around the nucleus of the LCs, while in the distal dendritic processes, mLangerin/CD207 antigens are rather sparsely distributed as punctuate structures. This unique possibility to simultaneously visualize high resolution 3D-resolved spatial distributions of two different immuno-reactive antigens, namely MHC-II and mLangerin/CD207, along with the nuclei of LCs and the adjacent epidermal cells can find interesting applications. These could involve aspects associated with pragmatic analysis of the kinetics of LCs migration as a function of immuno-dermatological responses during (1) human Immunodeficiency virus disease progression, (2) vaccination and targeted gene therapy, (3) skin transplantation/plastic surgery, (4) ultraviolet and other radiation exposure, (5) tissue-engineering of 3D skin constructs, as well as in (6) cosmetic industry, to unravel the influence of cosmeceuticals.

Animals↗

Fabrication and detection of tissue-engineered bones with bio-derived scaffolds in a rotating bioreactor.

In order to explore the methods for commercialized bone tissue engineering, engineered bones should be cultivated in bioreactors to realize three-dimensional culture under well-defined culture conditions. In the present paper, osteoblasts isolated from the cranium of 1-month-old Zelanian rabbits were inoculated on to the BDBS (bio-derived bone scaffolds) to investigate the three-dimensional fabrication of engineered bone in an RWVB (rotating-wall vessel bioreactor). The osteoblasts, after being transfected with green fluorescent protein, were respectively seeded at 2 x 10(6) and 1 x 10(6) cells x ml(-1) on to the BDBS and then cultured in a T-flask and an RWVB for 1 week. The morphologies and structure of the fabricated bone were investigated by using an inverted microscope, a scanning electron microscope and a laser confocal microscope using the stains haematoxylin/eosin and Toluidine Blue. After being digested from the scaffolds, the cells were assayed with ALP (alkaline phosphatase) stain, von-Kossa staining on mineralized nodules, type I collagen and bone morphogenetic protein-2 expression, and the cell expansion and growth curves using different culture methods were quantitatively determined with MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide). Furthermore, cell cycle and apoptosis were detected by using a flow cytometer, and total DNA was also assayed. For a comparative study, cell-seeded constructs were also cultured under static conditions. The results show that the cell number cultured in the RWVB was five times that in the T-flask. Bone tissues cultured in the RWVB with two different densities grew well, and the osteoblasts maintained their normal cycle and DNA content. The result demonstrates that, with the stress stimulation in the fluid in the RWVB, the active expression of ALP can be increased, rapid proliferation and differentiation of osteoblasts are possible and the three-dimensional fabrication of engineered bone could be realized.

Animals↗

[Simulation of the growth of neurosphere cultured in bioreactors].

When the size of a neurosphere cultured in vitro reaches a certain critical value, a necrotic core will appear inside the neurosphere because of the limitation of oxygen or other nutrients transport from medium to the cells in the neurasphere. Large necrotic core will greatly reduce the expansion of NSCs. The cellular automaton (CA) model is applied in this article to model the growth of NSCs in sphere state. The appearance and enlargement of the necrotic core in a neurosphere is calculated by coupling the CA model with the nutrient diffusion analysis in bioreactors. The calculation results indicate that the culture conditions, such as seeding density, the concentration of nutrients in medium and the mass transfer coefficient between a neurosphere and medium, have some effects on the appearance of the necrotic core. However, the necrotic core mainly depends on the inner diffusion. It will certainly appear if the size of the neurosphere is large enough even the outside mass transfer is in a good condition in bioreactors. Additionally, the appearance of the necrotic core resulting from the shortage of oxygen is earlier than that caused by the limitation of glucose. And the growth of the necrotic core is very fast after its appearance, and the whole neurosphere may become necrotic. The model developed with cellular automaton and mass transfer is a good qualitative representation of NSCs growth in bioreactors.

Bioreactors↗

An in line non-invasive optical system to monitor pH in cell and tissue culture.

pH is an important control parameter for maintenance of cell viability and for improving tissue functions during cell and tissue culture. pH monitoring during cell/tissue culture also provides valuable information on cell metabolic processes and living environment. In this study, an on-line, non-invasive pH monitoring system was developed for use during tissue/cell culture in a perfusion system, using an optical method. This device included light sources, light detectors, light guides and a flow cell. Phenol red was used as a pH indicator dye, and the ratio of light intensities at two wavelengths was measured at the same pH value. Low solution volume as low as around 10 microl could be used to detect pH. Compared to the conventional optical methods, this non-contact optical measurement can avoid the contamination of the tip of optical fibre during the long-term monitoring. It provides a possibility to do on-line monitoring and apply feed back control to maintain the culture environment at the desired conditions required for long-term cell/tissue culture.

Cell Culture Techniques↗

Separation of monoclonal antibody alemtuzumab monomer and dimers using ultrafiltration.

This article examines the feasibility of using ultrafiltration to separate the monomer of the monoclonal antibody alemtuzumab (Campath or Campath-1H) from a mixture of dimer and higher-order oligomers (collectively called "dimers" here). Using parameter scanning ultrafiltration, we initially assessed the suitability of the following membranes: 100 kDa and 300 kDa polyethersulfone (PES) membranes, and a 100 kDa polyvinylidene fluoride (PVDF) membrane. A detailed study was then carried out to examine the effects of operating conditions (such as solution pH, ionic strength, stirring speed, and permeate flux) on the separation of the monomer from the dimers using 300 kDa PES and 100 kDa PVDF membranes. Results of the experiments carried out in the carrier phase ultrafiltration (CPUF) mode indicate that the size-based protein-protein separation critically depends on the membrane used as well as the system hydrodynamics. The separation of the monoclonal antibody monomer and dimers using 100 kDa PVDF membranes in the diafiltration mode was also examined. Experimental results demonstrate that under suitable conditions, it is feasible to obtain the alemtuzumab monomer with a purity of more than 93% and a yield of more than 85% (from a mixture of 75% monomer and 25% dimers, which is the typical composition obtained after affinity chromatography). Simulation study indicates that this could be further improved to a purity of more than 96% and a monomer yield of more than 96% by increasing the selectivity of separation or by employing a two-stage diafiltration process.

Alemtuzumab↗

Fractionation of bovine serum albumin and monoclonal antibody alemtuzumab using carrier phase ultrafiltration.

Protein transmission and hence selectivity of separation can be significantly affected by solution pH and ionic strength in protein fractionation using ultrafiltration. Using parameter scanning ultrafiltration, the transmission of bovine serum albumin (BSA) and monoclonal antibody alemtuzumab (Campath-1H) through 300 kDa polyethersulfone (PES) ultrafiltration membranes were studied over a range of pH and salt concentrations, with focus on the likely conditions for achieving "reverse selectivity," i.e., obtaining purified alemtuzumab (approximately 155 kDa) in the permeate. Experimental results demonstrate that the reverse selectivity could be obtained by manipulating the operating conditions such as the solution pH, ionic strength, permeate flux, and system hydrodynamics. With a two-stage batch ultrafiltration process under suitable conditions, the monoclonal antibody alemtuzumab with a purity of > 98% was obtained in the permeate from a feed solution initially containing 0.50 g/l each of BSA and alemtuzumab. Further purity can be expected by selecting more suitable membranes and optimizing operating conditions.

Alemtuzumab↗

Efficient characterisation of human cell-bioceramic interactions in vitro and in vivo by using enhanced GFP-labelled mesenchymal stem cells.

Human mesenchymal stem cells (hMSCs) were transfected using four retroviral pseudotypes, amphotropic murine leukemia viruses 4070 (MuLV-10A1), a modification of amphotropic pseudotype 4073 (A71G, Q74K, V139M), gibbon ape leukemia virus (GaLV), or feline endogenous virus (RD114) encoding the neomycin resistance (Neo(r)) gene and enhanced green fluorescent protein (eGFP) as genetic markers. It was observed that the MuLV4073 was the most efficient pseudotype for hMSC transfection. The proliferation and differentiation characteristics of eGFP-labelled hMSCs were not significantly different from control hMSCs. G418 selected eGFP-labelled cells were cultured for 3 weeks on two porous, commercially available calcium phosphate bioceramics, a "synthetic hydroxyapatite" and a "deproteinised bone", before implantation into NOD/SCID mice for up to 4 weeks. The eGFP-labelled hMSCs could be readily visualised by their intense green fluorescence both in vitro and in vivo. In "synthetic hydroxyapatite" implants the cells remained in a monolayer, whereas in "deproteinised bone" implants mineralised tissues were detected by histology, scanning electron microscopy and energy dispersive X-ray spectrometry. From the results, it is concluded that the use of eGFP-labelled hMSCs is an effective tool to trace the fate of hMSCs and evaluate the interactions between cells and ceramics both in vitro and in vivo. This is of great value in prospective assessments of these cell populations for use in tissue engineering applications.

Animals↗

Macrophagic response to human mesenchymal stem cell and poly(epsilon-caprolactone) implantation in nonobese diabetic/severe combined immunodeficient mice.

Nonobese diabetic, severe combined immunodeficient (NOD/SCID) mice are extensively used to assess in vivo potentials for human cellular differentiation, development, and neophysiology. They are not only deficient in T and B cells, but also exhibit macrophage dysfunction and an absence of circulating complement. However, the survival of engrafted human mesenchymal stem cells (hMSCs) is limited and minimal mature bone tissue develops from implanted hMSCs in this model. The aim of the present study was to investigate the response to such implants in NOD/SCID mice. To this end, hMSCs genetically marked with enhanced green fluorescent protein, a biodegradable polymer, poly(epsilon-caprolactone) (PCL), and a bioconstruct incorporating the enhanced green fluorescent protein-labeled hMSCs with PCL after culture together for 3 weeks in vitro, were implanted into NOD/SCID mice and followed for up to 10 weeks. Monocytes/macrophages appeared to be the major invading cell type in all the implants and remained in the materials regardless of whether or not hMSCs were present over the time periods studied. When the hMSCs were implanted without the PCL scaffold, host macrophage invasion was also observed with the majority of hMSCs being eliminated within 2 weeks. Multinuclear giant cells or foreign body giant cells were seen in the cases of PCL implantation. These cells slowly infiltrated into the central core of the materials over a 10-week period of implantation with neutrophils and mast cells also being observed. In conclusion, in NOD/SCID mice, monocytes/macrophages still effectively respond to the implantation of xenografts and biopolymers with functional migration, phagocytosis, adhesion, foreign body recognition and formation of multinuclear giant cells, or foreign body giant cells. Thus, these animals still retain a level of innate immune responsiveness to these implantations and in addition may provoke a physiological environment that is unsuitable for extensive intramembranous ossification by engrafted hMSCs.

Animals↗

Factors influencing the oxygen concentration gradient from the synovial surface of articular cartilage to the cartilage-bone interface: a modeling study.

OBJECTIVE: There is very little information on the gradients of oxygen concentration from the synovial surface to the subchondral bone in articular cartilage. Cartilage is usually regarded as hypoxic, even though cellular metabolism is inhibited at low oxygen concentrations. We therefore measured rates of cellular consumption of oxygen and used these rates to calculate oxygen tension profiles across articular cartilage. METHODS: The rate of oxygen consumption by bovine articular chondrocytes was measured in vitro, either in intact cartilage slices or in isolated chondrocytes. The oxygen tension profile across articular cartilage was predicted by solving a 1-dimensional reaction-diffusion equation. The effect of synovial fluid oxygen concentration, cell density, cartilage thickness, and influx of oxygen from the subchondral bone on the oxygen profile in the tissue was examined. RESULTS: Oxygen consumption rates were relatively independent of oxygen tension at high oxygen tensions (5-21%), where they were approximately 10 nmoles/10(6) cells/hour for both isolated chondrocytes and for cartilage slices. Below 5% oxygen, the rate fell in an oxygen tension-dependent manner. Analysis showed that the oxygen profile across cartilage fell steeply in all but the thinnest cartilage samples but only fell to approximately 1% for low oxygen tensions in synovial fluid, with no supply from the subchondral bone. CONCLUSION: The oxygen tension in normal cartilage is not likely to fall to 1% except under abnormal conditions. Oxygen tensions within cartilage are strongly affected by a number of factors, including oxygen concentrations in synovial fluid, cartilage thickness, cell density, and cellular oxygen consumption rates. Supply from the subchondral bone may be of particular importance.

Animals↗