PubMed Health⌕ Search

Biomedical subjects

Zhenxia Chen

Publications and source records attributed to Zhenxia Chen.

9 recordsLinked to original sources

Facile construction of lanthanide metallomacrocycles with the bridging imidazolate and triazolate ligands and their ring expansions.

Four novel tri- or tetranuclear organolanthanide metallomacrocycles [Cp2Ln(mu-Im)(THF)3 (Cp = C5H5, Ln = Yb (1), Er (2)], [Cp2Dy(mu-Im)]4(THF)]3 x 2THF (3), and [Cp'2Yb(mu-eta1:eta2-Tz)]4 x 2THF (Cp' = CH3C5H4) (4) have been synthesized through protolysis of Cp3Ln or Cp'3Yb with imidazole or triazole, indicating that both the bridge-ligand size and the lanthanide-ion radii can be applied in the modulation of the metallomacrocycles. Further investigations on the reactivity of complexes 1, 3, and 4 toward phenyl isocyanate reveal that PhNCO inserts readily into the simple bridge Ln-N bonds of 1 and 3 to yield the corresponding insertion products [Cp2Ln(mu-eta1:eta2-OC(Im)NPh)]3 (Ln = Yb (5), Dy (6)) but cannot insert into the Ln-N bond with a mu-eta1:eta2-bonding mode in 4. The novel bridge ligand [OC(Im)NPh] can expand the numbers of the ring members from 12 to 18 in 5 or 16 to 18 in 6. The number of metal atoms in the metallacycles with the ligand [OC(Im)NPh] is independent of the lanthanide-ion size; both trinuclear lanthanide macrocycles are observed in 5 and 6. All of these new complexes have been characterized by elemental analysis and spectroscopic properties, and their structures have also been determined through X-ray single-crystal diffraction analysis.

Crystallography, X-Ray↗

Construction of 3D layer-pillared homoligand coordination polymers from a 2D layered precursor.

Herein, we present a new method for preparing homoligand 3D coordination polymers. First, a layered metal-organic framework Zn3(BDC)3(H2O)2 x 4DMF 1 (BDC is terephthalate, DMF is N,N-dimethylformamide) was fabricated from a H2BDC by liquid-liquid diffusion. Second, the layered product, 1, was used as a precursor to solvothermally react with further H2BDC at 140-180 degrees C, resulting in two products of BDC insertion into the layered structure. These are [Zn3(p-BDC)4] x 2HPIP, 2 (HPIP is partly protonated piperazine), and [Zn3(p-BDC)3(H2BDC)] x (C6H15NO) x H2O x 3DMF, 3 (C6H15NO is triethylamine N-oxide). Single-crystal X-ray diffraction shows that 2 possesses a layer-pillared structure of mu4-BDC, with 1D channels, while 3 has a layer-pillared structure of mu2-BDC, with 2D channels. N2-sorption experiments show 3 has a relatively high BET surface area of 750 m(2)/g. It is proposed that 2 follows the crystal growth mechanism of Ostwald ripening, whereas the crystal structure of 3 might be formed by an insertion mechanism.

Journal Article↗

Triconstituent co-assembly to ordered mesostructured polymer-silica and carbon-silica nanocomposites and large-pore mesoporous carbons with high surface areas.

Highly ordered mesoporous polymer-silica and carbon-silica nanocomposites with interpenetrating networks have been successfully synthesized by the evaporation-induced triconstituent co-assembly method, wherein soluble resol polymer is used as an organic precursor, prehydrolyzed TEOS is used as an inorganic precursor, and triblock copolymer F127 is used as a template. It is proposed for the first time that ordered mesoporous nanocomposites have "reinforced concrete"-structured frameworks. By adjusting the initial mass ratios of TEOS to resol, we determined the obtained nanocomposites possess continuous composition with the ratios ranging from zero to infinity for the two constituents that are "homogeneously" dispersed inside the pore walls. The presence of silicates in nanocomposites dramatically inhibits framework shrinkage during the calcination, resulting in highly ordered large-pore mesoporous carbon-silica nanocomposites. Combustion in air or etching in HF solution can remove carbon or silica from the carbon-silica nanocomposites and yield ordered mesoporous pure silica or carbon frameworks. The process generates plenty of small pores in carbon or/and silica pore walls. Ordered mesoporous carbons can then be obtained with large pore sizes of approximately 6.7 nm, pore volumes of approximately 2.0 cm(3)/g, and high surface areas of approximately 2470 m(2)/g. The pore structures and textures can be controlled by varying the sizes and polymerization degrees of two constituent precursors. Accordingly, by simply tuning the aging time of TEOS, ordered mesoporous carbons with evident bimodal pores at 2.6 and 5.8 nm can be synthesized.

Journal Article↗

Reactivity of lanthanocene hydroxides toward ketene, isocyanate, lanthanocene alkyl, and triscyclopentadienyllanthanide complexes.

The reactivity of [Cp(2)Ln(mu-OH)(THF)]2 (Ln = Y (1), Er (2), Yb (3)) toward PhEtCCO, PhNCO, Cp3Ln, [Cp2Ln(mu-CH3)]2, and the LiCl adduct of Cp2Ln(n)Bu(THF)x was examined. In all cases, OH-centered reactivity is observed: complexes 1-3 react with PhEtCCO to form the O-H addition products [Cp2Ln(mu-eta1:eta2-O2CCHEtPh)]2 (Ln = Yb (5), Er (6), Y (7), respectively, for 1-3), whereas treatment of 1 with PhNCO affords the addition/CpH-elimination/rearrangement product [{Cp2Y(THF)}2(mu-eta2:eta2-O2CNPh)] (8), which contains an unusual PhNCO(2) dianionic ligand. Analogous compound [Cp2Ln(THF)]2(mu-eta2:eta2-O2CNPh) (Ln = Yb (9), Er (10)) and 8 can be obtained in a higher yield by treatment of [Cp2Ln(mu-OH)(THF)]2 with PhNCO followed by reaction with the corresponding Cp3Ln. However, attempts to prepare the corresponding heterobimetallic complex by reacting stoichiometric amounts of [Cp2Y(mu-OH)(THF)]2 with PhNCO followed by treating it with Cp3Yb are unsuccessful. Instead, only rearrangement products 8 and 9 are obtained. Furthermore, the reaction of 3 with [Cp2Yb(mu-CH3)]2 or Cp3Yb forms oxo-bridged compound [Cp2Yb(THF)]2(mu-O) (11), whereas the reaction of [Cp2ErCl]2 with Li(n)Bu followed by treatment with 2 affords unexpected mu-oxo lanthanocene cluster (Cp2Er)3(mu-OH)(mu3-O)(mu-Cl)Li(THF)4 (12). In contrast to 1 and 2, 3 shows a strong tendency to undergo the intermolecular elimination of CpH at room temperature, giving trinuclear species [Cp2Yb(mu-OH)]2[CpYb(THF)](mu3-O) (4). The single-crystal X-ray diffraction structures of 1, 2, and 4-12 are described. All the results offer an interesting contrast to transition- and main-metal hydroxide complexes.

Journal Article↗

Synthesis and characterization of a novel organically templated open framework zirconogermanate with three- and seven-membered rings.

A new organically templated microporous zirconogermanate, (C(2)H(10)N(2))H(2)O[ZrGe(3)O(9)] (denoted as FDZG-3), with a low framework density of 13.6 T/1000 A(3), has been solvo/hydrothermally synthesized by using ZrO(NO(3))(2).2H(2)O as a zirconium source and triethylenetetramine (TETA) as a structure direct agent. This compound was characterized by means of single-crystal X-ray diffraction analysis, thermogravimetrical analysis, and IR and UV-vis spectra. Its three-dimensional (3D) framework is built up by 1D sinusoidal germanate chains cross-linked by ZrO(6) octahedra, which forms a network containing three- and seven-membered rings (MRs). Four intersecting 7-MR channels can be observed along the b axis, c axis, [110], and [-110] directions, respectively. Charge-balancing (C(2)H(10)N(2))(2+) and extraframework water molecules are encapsulated within 7-MR channels and form hydrogen bonds with framework oxygen atoms. Crystal data for FDZG-3: M = 533.13, monoclinic, space group Cc (No.9), a = 11.299(3) A, b = 7.7649(19) A, c = 13.835(3) A, beta = 104.826(3) degrees, V = 1173.4(5) A(3), Z = 4, R1 = 0.0263, wR2 = 0.0529.

Journal Article↗

(NH4)2ZrGe3O9: a new microporous zirconogermanate.

A new microporous zirconogermanate, diammonium zirconium trigermanate, (NH(4))(2)ZrGe(3)O(9) (FDZG-2), analogous to wadeite (K(2)ZrSi(3)O(9)), was hydrothermally synthesized using ZrO(NO(3))(2).2H(2)O as the source of zirconium and 1,4-diaminobutane as a structure-directing agent. Single-crystal X-ray diffraction analysis reveals that the framework structure is built up of cyclic trigermanate units crosslinked by ZrO(6) octahedra. The Zr atom lies at a site with -3 symmetry and the unique N atom of the ammonium ion lies at a site with threefold symmetry. Large cages are observed, with two NH(4)(+) cations in each. The structure contains intersecting six- and three-membered ring (6MR and 3MR) channels, but only the 6MR channels can accommodate the NH(4)(+) ions.

Journal Article↗