PubMed Health⌕ Search

Biomedical subjects

Zhenyang Lin

Publications and source records attributed to Zhenyang Lin.

31 records · Page 2Linked to original sources
PubMed2004

A nonacoordinated bridging selenide in a tricapped trigonal prismatic geometry identified in undecanuclear copper clusters: syntheses, structures, and DFT calculations.

Undecanuclear copper clusters, [Cu(11)(micro(9)-Se)(micro(3)-Br)(3)[Se(2)P(OR)(2)](6)] (R = Et, Pr, (i)Pr) (1a-c), were isolated along with closed-shell ion-centered cubes, [Cu(8)(micro(8)-Br)[Se(2)P(OR)(2)](6)] (PF(6)) (2a-c) and [Cu(8)(micro(8)-Se)[Se(2)P(OR)(2)](6)] (3a-c), from the reaction of [Cu(CH(3)CN)(4)](PF(6)), NH(4)[Se(2)P(OR)(2)], and Bu(4)NBr in a molar ratio of 2:3:2 in CH(2)Br(2). The molecular formulations of these clusters were confirmed by elemental analysis, positive FAB mass spectrometry, and multinuclear NMR ((1)H, (31)P, and (77)Se). (77)Se NMR spectra of Cu(11) clusters (1a-c) are of special interest as two inequivalent selenium nuclei of the diselenophosphate (dsep) ligand exhibit different scalar coupling patterns with the adjacent phosphorus nuclei. X-ray analysis of 1c reveals a Cu(11)Se core stabilized by three bromide and six dsep ligands. The central core adopts the geometry of a 3,3,4,4,4-pentacapped trigonal prism with a selenium atom in the center. The coordination geometry for the nonacoordinate selenium atom is tricapped trigonal prismatic. The X-ray structure 2a or 2c consists of a cationic cluster in which eight copper ions are linked by six diselenophosphate ligands with a central micro(8)-Br ion. The shape of the molecule is a bromide-centered distorted Cu(8) cube. Each diselenophosphate ligand occupies square faces of the cube and adopts a tetrametallic tetraconnective coordination pattern. Each copper atom of the cube is coordinated by three selenium atoms with a strong interaction with the central bromide ion. Molecular orbital calculations at the B3LYP level of the density functional theory have been carried out to study the Cu-micro(9)-Se interactions for clusters [Cu(11)(micro(9)-Se)(micro(3)-X)(3)[Se(2)P(OR)(2)](6)] (X = Br, I). Calculations show that the formal bond order of each Cu-micro(9)-Se bond is slightly smaller than half of those calculated for the terminal Cu-micro(2)-Se bonds.

Journal Article↗
PubMed2004

Structural analysis of five-coordinate transition metal boryl complexes with different d-electron configurations.

The site preference of boryl ligands in five-coordinate transition metal boryl complexes has been investigated with the aid of density functional theory calculations. The preferred site for a boryl ligand depends on the electron count of the complex under consideration. Our studies show that the very strong sigma-donating boryl ligands choose to occupy coordination sites such that those orbitals accommodating metal d electrons have minimal metal-boryl sigma-antibonding character.

Journal Article↗
PubMed2004

Theoretical study of reaction pathways for the rhodium phosphine-catalysed borylation of C-H bonds with pinacolborane.

The reaction mechanism of the rhodium-phosphine catalysed borylation of methyl-substituted arenes using pinacolborane (HBpin) has been investigated theoretically using DFT calculations at the B3PW91 level. Factors affecting selectivity for benzylic vs. aromatic C-H bond activation have been examined. It was found that [Rh(PR3)2(H)] is the active species which oxidatively adds the C-H bond leading to an eta3-benzyl complex which is the key to determining the unusual benzylic regioselectivity observed experimentally for this catalyst system. Subsequent reaction with HBpin leads to a [Rh(PR3)2(eta3-benzyl)(H)(Bpin)] complex from which B-C reductive elimination provides product and regenerates the catalyst. The electrophilic nature of the boryl ligand assists in the reductive elimination process. In contrast to Ir(L)2(boryl)3-based catalysts, for which Ir(III)-Ir(V) cycles have been proposed, the Rh(I)-Rh(III) cycle is operating with the system addressed herein.

Journal Article↗
PubMed2003

Ligand substitution in cubic clusters: surprising isolation of the cocrystallization products of Cu8(mu8-Se)[S2P(OEt)2]6 and Cu6[S2P(OEt)2]6.

The cluster (Cu8(mu8-Se)[S2P(OEt)2]6)0.54(Cu6[S2P(OEt)2]6)0.46 (2) was prepared in 78% yield from the reaction of Cu8(Se)[Se2P(OPr)2]6 (1) and NH4S2P(OEt)2 in toluene. The central selenide ion in 2 was characterized by 77Se NMR at delta -976 ppm. The simulated solid-state 31P NMR spectrum shows two components with an intensity ratio close to 55:45. The peak centered at 100.7 ppm is assigned to the 31P nuclei in the hexanuclear copper cluster, and that at 101.1 ppm is due to the octanuclear copper cluster. The single-crystal X-ray diffraction analysis confirms the cocrystallization structures of Cu8(Se)[S2P(OEt)2]6 (54%) and Cu6[S2P(OEt)2]6 (46%) (2: trigonal, space group R3, a=21.0139(13) A, c=11.404(3) A, gamma=120 degrees, Z=3). While the octanuclear copper cluster possesses a 3-fold crystallographic axis which pass through the Cu2, Se, and Cu(2A) atoms, the six copper atoms having the S6 point group symmetry in Cu6[S2P(OEt)2]6 form a compressed octahedron. The Cu8(mu8-Se) cubic core in Cu8(mu8-Se)[S2P(OEt)2]6 is larger in size than the metal core in Cu8(mu8-Se)[Se2P(OPr)2]6 (1) although the bite distance of the Se-containing bridging ligand is larger than that of the S ligand. To understand the nature of the structure contraction of the metal core and metal-mu8-Se interaction, molecular orbital calculations have been carried out at the B3LYP level of density functional theory. MO calculations suggest that Cu-mu8-Se interactions are not very strong and a half bond can be formally assigned to each Cu-mu8-Se bond. Moderate Cu...Cu repulsion exists, and it is the bridging ligands that are responsible for the observed Cu...Cu contacts. Hence, the S-ligating copper clusters have greater Cu...Cu separations because each Cu carries more positive charge in the presence of the more electronegative S-containing ligands.

Journal Article↗
PubMed2003

Dihydrogen-bond-promoted catalysis: catalytic hydration of nitriles with the indenylruthenium hydride complex (eta(5)-C(9)H(7))Ru(dppm)H (dppm = bis(diphenylphosphino)methane).

The indenylruthenium hydride complex (eta(5)-C(9)H(7))Ru(dppm)H was found to be active in catalyzing the hydration of nitriles to amides. The chloro analogue (eta(5)-C(9)H(7))Ru(dppm)Cl was, however, found to be inactive. Density functional theory calculations at the B3LYP level provide explanations for the effectiveness of the hydride complex and the ineffectiveness of the chloro complex in the catalysis. It is learned that the presence of a Ru-H.H-OH dihydrogen-bonding interaction in the transition state lowers the reaction barrier in the case of (eta(5)-C(9)H(7))Ru(dppm)H, but in the chloro system, the corresponding transition state does not contain this type of interaction and the reaction barrier is much higher. A similar dihydrogen-bond-promoting effect is believed to be responsible for the catalytic activity of the hydrotris(pyrazolyl)borato (Tp) ruthenium complex TpRu(PPh(3))(CH(3)CN)H in CH(3)CN hydration. The chloro analogue TpRu(PPh(3))(CH(3)CN)Cl shows no catalytic activity.

Journal Article↗
PubMed2003

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3).

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.

Journal Article↗
PubMed2003

Supramolecular interactions between fullerenes and porphyrins.

Perdew-Burke-Ernzerhof density functional theory calculations have been carried out to investigate the host-guest interactions for several fullerene-porphyrin supramolecular complexes. The nature of the interactions has been discussed. The fullerene-porphyrin interaction energies for the complexes studied are found to be in the range from -16 to -18 kcal/mol.

Journal Article↗
PubMed2003

Synthesis, characterization, and theoretical studies of group 4 amido hydrotris(pyrazolyl)borate complexes.

Titanium and zirconium amido complexes containing a hydrotris(pyrazolyl)borate (Tp) or hydrotris(3,5-dimethylpyrazolyl)borate (Tp*) ligand TpM(NMe(2))(3) (M = Ti, 1; M = Zr, 2) and Tp*M(NMe(2))(3) (M = Ti, 3; M = Zr, 4) were prepared by the reactions of M(NMe(2))(3)Cl (M = Ti, Zr) with sodium hydridotris(pyrazol-1-yl)borate and potassium hydridotris(3,5-dimethylpyrazol-1-yl)borate, respectively. The structures of 1, 2, and 4.CH(2)Cl(2) were determined by X-ray diffraction and show octahedral coordination geometry around the metal centers. Density functional theory calculations at the B3PW91 level were performed to understand the orientations and the rotational behavior of amido ligands in these metal complexes.

Journal Article↗
PubMed2002

Electronic structures of electron-rich octahedrally condensed transition-metal chalcogenide clusters.

The electronic structures of some electron-rich octahedrally condensed transition-metal chalcogenide clusters are analyzed with the aid of extended Hückel and density functional molecular orbital calculations. A simple orbital approach is developed to analyze the electron counts of these clusters, which do not obey any existing electron-counting rules. Different electron counts are allowed, depending upon the nature of the metal. Optimal counts are discussed. Metal-metal bonding is generally weak in these species. Consequently, their structural arrangements are mainly governed by metal-ligand interactions.

Journal Article↗
PubMed2002

Structural and bonding characteristics in transition metal-silane complexes.

Transition metal-silane complexes containing metal-eta 2-H-Si coordination display different structural and bonding characteristics in comparison to other sigma-complexes, such as dihydrogen and alkane (agostic) complexes. The different characteristics can be related to the strong sigma*-accepting properties of the eta 2-silane ligand(s) because of the weaker H-Si sigma bond. Various examples of metal-silane complexes have been reviewed and their structural stabilities have been systematically discussed. Silyl-hydride complexes having substantial silyl-hydrido interactions have also been emphasized.

Journal Article↗
PubMed1996

Theoretical Study of Metal-Tetrahydroborato Ligand Interactions in [Y(THF)(4)(BH(4))(2)](+).

Ab initio calculations for the [Y(H(2)O)(4)(BH(4))(2)](+) complex, a model of [Y(THF)(4)(BH(4))(2)](+), have been carried out to study the metal-BH(4)(-) ligand interactions. Our calculations for various isomers with different BH(4)(-) coordination modes allow us to explore the electronic and electrostatic interactions in details. It is found that both electronic and electrostatic effects are of almost equal importance.

Journal Article↗