PubMed Health⌕ Search

Biomedical subjects

Zhi-Guo Su

Publications and source records attributed to Zhi-Guo Su.

31 records · Page 2Linked to original sources

Hydrophobic interaction chromatography correctly refolding proteins assisted by glycerol and urea gradients.

Chromatographic columns packed with commercially available hydrophobic interaction chromatography (HIC) media were found to be able to suppress aggregation and nevertheless had a tendency to promote the structural misfolding resulting in higher soluble protein recovery and lower specific activity than that by dilution when they were used to refold lysozyme, a model protein. Moreover, this misfolding effect was exacerbated with increasing hydrophobicity of media. A novel strategy involving the combination of glycerol, a typical osmolyte, a urea gradient and commercially available HIC media was introduced to facilitate protein refolding correctly as well as improve mass recovery by providing a gradual change of the refolding environment in the HIC column. In this process, unfolded lysozyme was bound to Poros PE HIC column at high salt concentration and was released by a urea gradient followed by elution with refolding buffer in the presence of 50 % (v/v) glycerol, resulting in 86.3% activity yield and 85% mass recovery with the refolded product of native specific activity. For the absence of glycerol, only 50.9% activity yield and 59% specific activity recovery was obtained although mass recovery was closed to that in the presence of glycerol. It was also discovered that glycerol addition during elution process was necessary for correct refolding compared to mixing of glycerol with post-column fraction. The possible mechanism for refolding with this system was proposed to be relevant to the formation of an on-pathway intermediate that could slowly reactivate.

Adsorption↗

Preparation of uniform-sized PLA microcapsules by combining Shirasu porous glass membrane emulsification technique and multiple emulsion-solvent evaporation method.

Relatively Uniform-sized biodegradable poly(lactide) (PLA) microcapsules were successfully prepared by combining a Shirasu Porous Glass (SPG) membrane emulsification technique and multiple emulsion-solvent evaporation method. An aqueous phase containing lysozyme was used as the internal water phase (w1), and PLA and Arlacel 83 were dissolved in a mixture solvent of dichloromethane (DCM) and toluene which was used as the oil phase (o). These two solutions were emulsified by a homogenizer to form a w1/o primary emulsion. The primary emulsion was permeated through the uniform pores (5.25 microm) of an SPG membrane into the external water phase by the pressure of nitrogen gas to form the uniform w1/o/w2 droplets. Then, the solid polymer microcapsules were obtained by simply evaporating the solvent. It is necessary to avoid the phase separation of primary emulsion during the SPG membrane emulsification. It was found that when the density difference of the internal water phase and oil phase was reduced to nearly zero and Arlacel 83 was used as the oil emulsifier, the phase separation was not observed within 24 h. The w1/o/w2 emulsion with uniform diameter was obtained only when Arlaecl 83 concentration was limited below 2.5 wt.% based on oil phase. The drug encapsulation efficiency was found to be related to several factors including PLA molecular weight, additive type and its concentration in the internal water phase, the emulsifier type and concentration in the oil phase, the NaCl concentration and the pH value in the external water phase. Comparing with the stirring method, it was found that the size was more uniform and the drug encapsulation efficiency was much higher when the microcapsules were prepared by SPG membrane emulsification technique and the highest drug encapsulation efficiency of 92.20% was obtained. This is the first study to prepare PLA microcapsules by combining an SPG membrane emulsification technique and multiple emulsion-solvent evaporation method.

Capsules↗

In vitro protein refolding by chromatographic procedures.

In vitro protein refolding is still a bottleneck in both structural biology and in the development of new biopharmaceuticals, especially for commercially important polypeptides that are overexpressed in Escherichia coli. This review focuses on protein refolding methods based on column procedures because recent advances in chromatographic refolding have shown promising results.

Chaperonins↗

Single-step recovery of ephedrine hydrochloride from raw materials using expanded bed adsorption.

Expanded bed adsorption, using a cation resin 001 x 7 Styrene-DVB, was used to recover and purify ephedrine hydrochloride from a powdered herb. The axial liquid-phase dispersion coefficient was about 10(-5) m(2) s(-1) and the recovery yield and purification reached 86% and 22, respectively. Compared with using conventional extraction with dimethylbenzene, this method is safer and also more efficient.

Cation Exchange Resins↗

[Influence of wall polymer and preparation process on the particle size and encapsulation of hemoglobin microcapsules].

Methoxypoly (ethylene glycol)- block-poly (DL-lactide) (PELA) microcapsules containing bovine hemoglobin (BHb) were prepared by a W/O/W double emulsion-solvent diffusion process. The P50 and Hill coeffcient were 3466 Pa and 2.4 respectively, which were near to the natural bioactivity of bovine hemoglobin. The results suggested that polymer composition had significant influence on encapsulation efficiency and particle size of microcapsules. The encapsulation efficiency could reach 90% and the particle size 3 - 5 microm when the PELA copolymer containing MPEG 2000 block was used. The encapsulation efficiency and particle size increased with the concentration of PELA. Increasing the concentrations of NaCl in outer aqueous solution resulted in the increase of encapsulation efficiency and the decrease of particle size. As the concentration of stabilizer in outer aqueous solution increased in the range of 10 g/L to 20 g/L, the particle size reduced while encapsulation efficiency was increased, further increase of the stabilizer concentration would decrease encapsulation efficiency. Increasing of primary emulsion stirring rate was advantageous to the improvement of encapsulation efficiency though it had little influence on the particle size. The influence of re-emulsion stirring rate was complicated, which was not apparent in the case of large volume of re-emulsion solution. When the wall polymer and primary emulsion stirring rate were fixed, the encapsulation efficiency decreased as the particle size reduced.

Animals↗

The preparation and characterization of monomethoxypoly(ethylene glycol)-b-poly-DL-lactide microcapsules containing bovine hemoglobin.

Methoxypoly(ethylene glycol)-b-poly-DL-lactide (PELA) microcapsules containing bovine hemoglobin (bHb) were prepared by a W/O/W double emulsion-solvent diffusion process. bHb solution was used as the internal aqueous phase, PELA/organic solvent as the oil phase, and polyvinyl alcohol (PVA) solution as the external aqueous phase. This W/O/W double emulsion was added into a large volume of water (solidification solution) to allow organic solvent to diffuse into water. The optimum preparative condition for PELA microcapsules loaded with bovine hemoglobin was investigated. It was found that homogenization rate, type of organic solvent, and volume of the solidification solution influenced the activity of bovine hemoglobin encapsulated. When the homogenization rate was lower than 9000 rpm and ethyl acetate was used as the organic solvent, there was no significant influence on the activity of hemoglobin. High homogenization rate as 12 000 rpm decreased the P50 and Hill coefficient. Increasing the volume of solidification solution had an effect of improving the activity of microencapsulated hemoglobin. The composition of the PELA had the most important influence on the success of encapsulation. Microcapsules fabricated by PELA with MPEG2k block (molecular weight of MPEG block: 2000) achieved a high entrapment efficiency of 90%, better than PL A homopolymer and PELA with MPEG5k blocks. Hemoglobin microcapsules with native loading oxygen activity (P50 = 26.0 mmHg, Hill coefficient = 2.4), mean size of about 10 microm, and high entrapment efficiency (ca. 93%) were obtained at the optimum condition.

Acetates↗

[The preparation of an artificial red blood cell substitute by W/O/W double emulsion methods].

A method of preparing methoxypoly (ethylene glycol)-poly-DL-lactide (PELA) microcapsule containing bovine hemoglobin(BHb) by using W/O/W double emulsion-solvent diffusion process for use as artificial red cells was developed. The results suggested that preparation conditions such as solidification method, stirring rate, type of organic solvent had significant influence on the encapsulation efficiency and the activity of bovine hemoglobin. When ethyl acetate was used as the organic solvent and double emulsion-solvent diffusion process was used, there was no significant influence on the activity of hemoglobin if stirring rate was lower than 9000 r/min. High stirring rate, 12,000 r/min, decreased the P(50) and Hill coefficient of the hemoglobin encapsulated. Increasing the volume of solidification solution had an effect of improving the activity of hemoglobin to carry oxygen.

Animals↗

[Purification and fingerprinting development of Salvia miltiorrhiza Bunge by high-speed counter-current chromatography].

In an attempt to apply high-speed counter-current chromatography HSCCC for TCM fingerprints, the separation and purification of the Chinese medicinal plant Salvia miltiorrhiza Bunge of different localities was realized using the technique. The equipments used include a HSCCC (TBE-300) of Shenzhen Tauto Biotech containing three connected preparative coils (diameter of tube = 2.6mm, total volume = 300mL) and a 20mL sample loop and a HPLC from Shimadzu of Japan with a Ultrasphere C18 column (150 x 4.6mm ID, 5microm) and a 20microL sample loop. Salvia miltiorrhiza Bunge samples from 3 locations were separated by HSCCC in a Step-wise elution program with solvent systems A (hexane:ethanol: water = 10:5.5:4.5) and B (hexane:ethanol: water = 10:7:3) at a speed of 900 r/min and a flow-rate of 2mL/min. All the 12 peak fractions were eluted within 13 hours. The contents of each component varied greatly in different samples, which confirmed previous observation that the locations and climates have a great impact on the TCM quality and also indicated a quality control system is necessary to safeguard the quality of the herb. The retention times of the 12 peak fractions from crude extracts of the samples were collected by HPLC and the absorption spectrums of the corresponding peaks were identified. The 12 components of the three crude samples were readily distinguishable and can be used as fingerprints of S. miltiorrhiza Bunge. The relative standard deviation of the HSCCC retention times was less than 3%, which satisfies the requirement of the national standard reference index. The components 7, 8 and 11 from the standards were identified to be crypototanshinone, tanshinone I and tanshinone II A respectively. This study demonstrates that if it is possible to apply HSCCC for TCM fingerprinting, especially with samples of high viscosity and highly absorptive components. The precision and the run time of fingerprinting can be further improved if larger volume and a temperature control system is used. With these and other improvements, HSCCC is expected to play an important role in TCM development.

Abietanes↗

Chromatographic methods for the isolation of, and refolding of proteins from, Escherichia coli inclusion bodies.

New methods for the chromatographic isolation of inclusion bodies directly from crude Escherichia coli homogenates and for the refolding of denatured protein are presented. The traditional method of differential centrifugation for the isolation of purified inclusion bodies is replaced by a single gel-filtration step. The principle is that the exclusion limit of the gel particles is chosen such that only the inclusion bodies are excluded, i.e., all other components of the crude homogenate penetrate the gel under the conditions selected. In the novel column refolding process, a decreasing gradient of denaturant (urea or Gu-HCl), combined with an increasing pH gradient, is introduced into a gel-filtration column packed with a gel medium that has an exclusion limit lower than the molecular mass of the protein to be refolded. A limited sample volume of the protein, dissolved in the highest denaturant concentration at the lowest pH of the selected gradient combination, is applied to the column. During the course of elution, the zone of denatured protein moves down the column at a speed approximately threefold higher than that of the denaturant. This means that the protein sample will gradually pass through areas of increasingly lower denaturant concentrations and higher pH, which promotes refolding into the native conformation. The shape and slope of the gradients, as well as the flow rate, will influence the refolding rate and can be adjusted for different protein samples. The principle is illustrated using a denatured recombinant scFv fusion protein obtained from E. coli inclusion bodies.

Centrifugation↗

Cloning, expression and purification of gussurobin, a thrombin-like enzyme from the snake venom of Gloydius ussuriensis.

Total RNAs were extracted from the venom gland of the snake Gloydius ussuriensis. The cDNA of gussurobin, a thrombin-like enzyme from Gloydius ussuriensis, was cloned and amplified by RT-PCR. Assay of the nucleotide sequence of the cDNA allowed postulation of the complete amino acid sequence for Gloydius ussuriensis, Chinese Viperdae. Its amino acid sequence exhibits significant homology with that of other snake thrombin-like enzymes. The cDNA of gussurobin was inserted into the vector pPIC 9K and expressed successfully in Pichia pastoris, strain GS115. The recombinant gussurobin was separated and purified from 500 ml culture and showed one band on SDS-PAGE.

Amino Acid Sequence↗

[Preparation of bovine lipid-free hemoglobin].

A new method for preparation of Hb solution free of stromal lipid was described. Almost all the lipid in fresh hemolysate of bovine red blood was removed with hydrophobic interaction chromatography (HIC) in the presence of 2% PEG4000, 5% PEG4000, 2%PEG10000 or 5%PEG10000. With the adding of 5%PEG4000, the 80% of recovery of Hb in HIC was obtained and the maximum lipid absorbed by hydrophobic medium, butyl agarose -6B was 86.6 mg/mL. The activity (P50) of hemoglobin preparation was 3386.4 Pa torrs, and the Hill number was 2.54, which were near to that of the native red blood cells. The mechanism of removing lipid by HIC and the function of PEG in the process were discussed.

Animals↗

[Progress in purification of human serum albumin].

Human serum albumin(HSA) has been used clinically to treat a number of diseases with high dosage. Extremely pure puoduct is required in large-scale production. Plasma-derived HSA(pHSA) has long been produced by precipitation methods. Among them cold ethanol precipitation is dominant. However, chromatographic purification of HSA has been increasingly studied in the last few years. Application of chromatography, especially ionexchange, affinity, and size-exclusion, has opened a new area in the production of pHSA. A new challenge is the purification of recombinant HSA(rHSA). A successful approach involves STREAMLINE expanded bed adsorption to direct capture the target product from the fermentation broth. This novel process eliminates the need to separate the cells by centrifugation or membrane filtration. Ion exchange chromatography and hydrophobic chromatography play a central role in the purification scheme. Integration with other chromatographic techniques such as size-exclusion, metal chelate, and affinity gives improved purification results. Though innovative, the purification of rHSA still needs further improvement and optimization to increase product purity and process recovery.

Humans↗

Application of a Designed Synthetic Ligand for the Separation and Purification of Alkaline Phosphatase.

An artificial affinity ligand comprising a p-aminobenzyl phosphoric acid as inhibitor was designed and coupled to an agarose support by chlorotriazine ring to separate and purify alkaline phosphatase from calf intestine. The optimal density of the ligand is 6 &mgr;mol/g adsorbent. After elution with sodium chloride and inorganic phosphoric acid a 300-fold purified enzymatic preparation was obtained in one step with a yield of 90%.

Journal Article↗