Biomedical subjects

Zhicheng Long

Publications and source records attributed to Zhicheng Long.

5 recordsLinked to original sources

PubMed2006

Double-cross hydrostatic pressure sample injection for chip CE: variable sample plug volume and minimum number of electrodes.

A novel sample injection method for chip CE was presented. This injection method uses hydrostatic pressure, generated by emptying the sample waste reservoir, for sample loading and electrokinetic force for dispensing. The injection was performed on a double-cross microchip. One cross, created by the sample and separation channels, is used for formation of a sample plug. Another cross, formed by the sample and controlling channels, is used for plug control. By varying the electric field in the controlling channel, the sample plug volume can be linearly adjusted. Hydrostatic pressure takes advantage of its ease of generation on a microfluidic chip, without any electrode or external pressure pump, thus allowing a sample injection with a minimum number of electrodes. The potential of this injection method was demonstrated by a four-separation-channel chip CE system. In this system, parallel sample separation can be achieved with only two electrodes, which is otherwise impossible with conventional injection methods. Hydrostatic pressure maintains the sample composition during the sample loading, allowing the injection to be free of injection bias.

Electrodes↗

PubMed2006

Isotachophoresis preconcentration integrated microfluidic chip for highly sensitive genotyping of the hepatitis B virus.

The genotyping of hepatitis B virus (HBV) has become recently a valuable tool not only for epidemiological reasons but also for the clinical practice. Conventional methods for HBV genotyping typically include amplification of the target DNA sequences with a two-round nested PCR followed by separation of the amplified fragments by gel electrophoresis. A microfluidic chip that couples isotachophoresis (ITP) preconcentration and zone electrophoresis (ZE) separation may provide great advantages for sensitive, rapid and cost-effective clinical analysis. In this study, an HBV genotyping method with only one amplification round was developed by the application of the ITP-ZE chip. All the analysis steps of the ITP-ZE separation including sample injection, stacking and separation were performed continuously, controlled by sequential high-voltage switching. A 2.1cm sample plug was preconcentrated between discontinuous buffers in ITP process, followed by ZE separation. Sensitivity enhancement was obtained through the increase of sample loading volume. The average LOD value of the ITP-ZE microfluidic chip was determined to be 0.0021pg/muL. In a large-scale HBV genotyping test, single round PCR products were analyzed by ITP-ZE microfluidic chip, and the results were compared with that of the conventional method. Among the 200 cases studied, the classification rate obtained with microfluidic chip was 93%, which was 6% higher than that obtained with the conventional method. Method with ITP-ZE chip analysis provides HBV genotyping information in reduced PCR amplification time with higher detection rate when compared with conventional method. This method holds great potential for extrapolation to the abundance of similar molecular biology-based techniques in clinical diagnosis.

Base Sequence↗

PubMed2006

Recent advances of microfluidics in Mainland China.

The history and current status of research on microfluidics in China is summarized in this review. The recent representative contributions in this field by Chinese scientists are cited. A perspective on some trends in future development of this field in China is presented.

Animals↗

PubMed2006

Parallel analysis of biomolecules on a microfabricated capillary array chip.

This paper focused on a self-developed microfluidic array system with microfabricated capillary array electrophoresis (mu-CAE) chip for parallel chip electrophoresis of biomolecules. The microfluidic array layout consists of two common reservoirs coupled to four separation channels connected to sample injection channel on the soda-lime glass substrate. The excitation scheme for distributing a 20 mW laser beam to separation channels in an array is achieved. Under the control of program, the sample injection and separation in multichannel can be achieved through six high-voltage modules' output. A CCD camera was used to monitor electrophoretic separations simultaneously in four channels with LIF detection, and the electropherograms can be plotted directly without reconstruction by additional software. Parallel multichannel electrophoresis of series biomolecules including amino acids, proteins, and nucleic acids was performed on this system and the results showed fine reproducibility.

Amino Acids↗

PubMed2006

Integration of nanoporous membranes for sample filtration/preconcentration in microchip electrophoresis.

Microfluidic devices integrating membrane-based sample preparation with electrophoretic separation are demonstrated. These multilayer devices consist of 10 nm pore diameter membranes sandwiched between two layers of PDMS substrates with embedded microchannels. Because of the membrane isolation, material exchange between two fluidic layers can be precisely controlled by applied voltages. More importantly, since only small molecules can pass through the nanopores, the integrated membrane can serve as a filter or a concentrator prior to microchip electrophoresis under different design and operation modes. As a filter, they can be used for separation and selective injection of small analytes from sample matrix. This has been effectively applied in rapid determination of reduced glutathione in human plasma and red blood cells without any off-chip deproteinization procedure. Alternatively, in the concentrator mode, they can be used for online purification and preconcentration of macromolecules, which was illustrated by removing primers and preconcentrating the product DNA from a PCR product mixture.

DNA↗