PubMed Health⌕ Search

Biomedical subjects

Zhongfan Liu

Publications and source records attributed to Zhongfan Liu.

At least 19 recordsLinked to original sources
PubMed2007

Two distinct buckling modes in carbon nanotube bending.

By using controlled SPM manipulation, carbon nanotubes have been continuously bent into a series of increasing angles, and two distinct buckling modes corresponding to "abrupt" and "gradual" buckle formation were observed through recording the height increment at the bend site during the loading process. Molecular dynamics simulation also found the two buckling modes in different types of carbon nanotubes, and their atomistic mechanism was revealed. Finally, the dependence of the critical buckling condition on diameters of carbon nanotubes was tentatively studied.

Nanotubes, Carbon↗
PubMed2006

Simultaneous dielectrophoretic separation and assembly of single-walled carbon nanotubes on multigap nanoelectrodes and their thermal sensing properties.

By using the specifically designed multigap nanoelectrodes, we demonstrated an effective approach for the simultaneous dielectrophoretic separation and assembly of metallic and semiconducting single-walled carbon nanotubes (SWNTs). An approximate metallic-semiconducting-metallic multiarray structure was created by an inward-propagative sequential assembly of SWNTs under ac electric field. Such kinds of SWNT multiarray structures exhibited ultra-low-power consumption and excellent thermal sensing performances with the sensitivity being dependent on the number of gaps: the more gaps, the higher sensitivity. The effective separation of metallic and semiconducting tubes in different gaps is believed to be responsible for the improved sensitivity to temperature.

Journal Article↗
PubMed2006

Controllable synthesis of conducting polypyrrole nanostructures.

Wire-, ribbon-, and sphere-like nanostructures of polypyrrole have been synthesized by solution chemistry methods in the presence of various surfactants (anionic, cationic, or nonionic surfactant) with various oxidizing agents [ammonium persulfate (APS) or ferric chloride (FeCl3), respectively]. The surfactants and oxidizing agents used in this study have played a key role in tailoring the nanostructures of polypyrrole during the polymerization. It is inferred that the lamellar structures of a mesophase are formed by self-assembly between the cations of a long chain cationic surfactant [cetyltrimethylammonium bromide (CTAB) or dodeyltrimethylammonium bromide (DTAB)] and anions of oxidizing agent APS. These layered mesostructures are presumed to act as templates for the formation of wire- and ribbon-like polypyrrole nanostructures. In contrast, if a short chain cationic surfactant octyltrimethylammonium bromide (OTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonylphenyl ether (Opi-10) is used, sphere-like polypyrrole nanostructures are obtained, whichever of the oxidizing agents mentioned above is used. In this case, micelles resulting from self-assembly among surfactant molecules are envisaged to serve as the templates while the polymerization happens. It is also noted that, if anionic surfactant sodium dodeyl surfate (SDS) is used, no characteristic nanostructures of polypyrrole were observed. This may be attributed to the doping effect of anionic surfactants into the resulting polypyrrole chains, and as a result, micelles self-assembled among surfactant molecules are broken down during the polymerization. The effects of monomer concentration, surfactant concentration, and surfactant chain length on the morphologies of the resulting polypyrrole have been investigated in detail. The molecular structures, composition, and electrical properties of the nanostructured polypyrrole have also been investigated in this study.

Journal Article↗
PubMed2005

Substrate-induced Raman frequency variation for single-walled carbon nanotubes.

We report on the monotonic Raman frequency shift and intensity variation when a laser spot moves along the same single-walled carbon nanotube (SWNT) for both the radial-breathing mode (RBM) and the G-band. Our substrates are Si wafers coated with thermal oxide, and trenches with widths of 1-80 mum are etched in the SiO2 by photolithography and reactive ion etching. SWNTs are grown by chemical vapor deposition and lie on top of the SiO2 and across the trenches. When the laser spot moves from the middle of the trench to the SiO2 region along the nanotube, we observe a clear upshift in the RBM and G-band frequencies and a decrease of intensity. The effect is more significant with large ( approximately 2 nm) diameter nanotubes and appears to be chirality dependent. These studies provide important information about environmental effects on single-walled carbon nanotube resonant Raman spectroscopy.

Journal Article↗
PubMed2005

Thermochemical hole burning on a series of N-substituted morpholinium 7,7,8,8-tetracyanoquinodimethane charge-transfer complexes for data storage.

We demonstrate here the thermochemical hole burning (THB) effect on a series of N-substituted morpholinium 7,7,8,8-tetracyanoquinodimethane charge-transfer (C-T) complexes for ultra-high-density data storage. A correlation between the decomposition temperature of the charge-transfer complex and the threshold voltage of hole burning was observed: the higher the decomposition temperature, the larger the writing threshold value, suggesting the possibility of molecular design for optimizing the hole burning performance. The macroscopic decomposition properties of these charge-transfer complexes were studied by thermal gravimetry combined with mass spectrometry. Theoretical estimation of the temperature rise induced by scanning tunneling microscopy current heating was also conducted, which indicated that the maximum temperature certainly exceeds the decomposition temperatures of these C-T complexes. These observations are consistent with the thermochemical hole burning mechanism.

Journal Article↗
PubMed2005

Electrochemistry at chemically assembled single-wall carbon nanotube arrays.

Single-wall carbon nanotubes (SWNTs) chemically assembled on gold substrates were employed as electrodes to investigate the charge transfer process between SWNTs and the underlying substrates. Cyclic voltammetry (CV) indicates that the assembled SWNTs allow electron communication between a gold electrode and the redox couple in solution, though the SWNTs are linked directly onto the insulating monolayer of 11-amino-n-undecanethiol (AUT) on the Au substrate. An electron transfer (ET) mechanism, which contains an electron tunneling process across the AUT monolayer, is proposed to explain the CV behavior of Au/AUT/SWNT electrodes. Electrochemical measurements show that the apparent electron tunneling resistance, which depends on the surface density of assembled SWNTs, has apparent effects similar to those of solution resistance on CV behavior . The theory of solution resistance is used to describe the apparent tunneling resistance. The experimental results of the dependence of ET parameter psi on the potential scan rate upsilon are in good agreement with the theoretical predictions. Kinetic studies of the chemical assembly of SWNTs by atomic force microscopic (AFM), electrochemical, and Raman spectroscopic methods reveal that two distinct assembly kinetics exist: a relatively fast step that is dominated by the surface reaction, and a successive slow step that is governed by bundle formation.

Journal Article↗
PubMed2005

Formation mechanism of nonspherical gold nanoparticles during seeding growth: roles of anion adsorption and reduction rate.

A small section of nonspherical particles can be observed in the further growth of spherical gold colloids exposed to a mixture of NH2OH and HAuCl4. The concentration ratio of [NH2OH]:[HAuCl4] is critical for the formation of nonspherical particles as higher ratios produce lower yields and smaller of such particles. These concentrations also affect the reaction kinetics; the reaction rate increases with [NH2OH], while independent of [HAuCl4], which we believe is due to the specific adsorption of AuCl4- onto gold surface. These nonspherical particles come from the preferential growth of {111} facets as indicated by their TEM images and electron diffraction patterns. We propose this preferential growth is ascribed to the preferential adsorption of AuCl4- on {111} facets, and some competition which determines the yield of nonspherical particles exists between the AuCl4- adsorption and the AuCl4- reduction, faster reduction counteracting the effect of this preferential adsorption and thus suppressing nonspherical particle. This result probably provides some guidance to develop a shape-controlled synthesis of gold particles without any additives.

Journal Article↗
PubMed2005

Controllable interconnection of single-walled carbon nanotubes under ac electric field.

We demonstrated the controllable interconnection of single-walled carbon nanotubes (SWNTs) under alternating current (ac) electric field. The interconnected carbon nanotubes were found to be parallel with the electric flux and increased abruptly with deposition time following a self-accelerating process. Theoretical simulation indicates that the alignment and the interconnection of carbon nanotubes were induced by the dielectrophoresis force and the electric field redistribution at the nanotube apexes.

Letter↗
PubMed2005

Nano-welding by scanning probe microscope.

A novel method, nano-welding, analogous to spot welding at the nanoscale level using scanning probe microscopy (SPM) is presented. Using SPM oxidation of the underlying silicon, single-walled carbon nanotubes (SWNTs) have been immobilized to the surface at point sites along their lengths by the nano-welding. It is shown that this nano-welding process nearly has no structural damage to the SWNTs. This immobilization makes the SPM manipulation of SWNTs controllable and desirable, which is helpful for the construction of SWNT-based nanodevices.

Journal Article↗
PubMed2005

Surfactant-resisted assembly of Fe-containing nanoparticles for site-specific growth of SWNTs on Si surface.

This paper describes a facile approach to the site-specific growth of single-walled carbon nanotubes (SWNTs) on silicon surfaces by chemical vapor deposition (CVD). The approach is based on the use of a surfactant as a resist to define patterns of silicon oxide nanodomains onto which nanoparticles of iron hydroxide (Fe(OH)3), 1-5 nm diameter, could be deposited. In base growth mode, the SWNTs can grow from the oxide nanodomains. By controlling the location of oxide nanodomains, site-specific growth could be obtained. The iron hydroxide nanoparticles were prepared by hydrolysis of ferric chloride (FeCl3). Patterned hydroxylated silicon oxide nanodomains were created by scanning probe oxidation (SPO) of silicon substrates modified with aminopropyltrimethoxysilane (APTMS, H2N(CH2)3Si(OCH3)3). Due to electrostatic interaction, Fe(OH)3 nanoparticles can be selectively deposited on hydroxyl groups present on silicon oxide nanodomains. To inhibit the assembly of the nanoparticles on a APTMS-coated silicon surface, sodium dodecyl sulfate (SDS) was introduced, which restricted deposition to the hydroxylated nanodomains. A model mechanism for the selective deposition mechanism has been proposed. It was possible to convert the patterned Fe(OH)3 nanoparticles to iron oxide, which served as a catalyst for the site-specific growth of SWNTs. Raman spectroscopy and AFM were used to characterize the nanotubes on the Si substrate. This will offer the possibility for future integration with conventional microelectronics as well as the development of novel devices.

Journal Article↗
PubMed2005

CVD growth of N-doped carbon nanotubes on silicon substrates and its mechanism.

In the present study, we report the chemical vapor deposition (CVD) of nitrogen-doped (N-doped) aligned carbon nanotubes on a silicon (Si) substrate using ferrocene (Fe(C5H5)2) as catalyst and acetonitrile (CH3CN) as the carbon source. The effect of experimental conditions such as temperature, gaseous environment, and substrates on the structure and morphology of N-doped carbon nanotubes arrays is reported. From XPS and EELS data, it was found that the nitrogen content of the nanotubes could be determined over a wide range, from 1.9% to 12%, by adding the addition of hydrogen (H2) to the reaction system. It was also shown by SEM that N-doped carbon nanotube arrays could be produced on Si and SiO2 substrates at suitable temperatures, although at different growth rates. Using these concentrations, it was possible to produce three-dimensional (3D) carbon nanotubes architectures on predetermined Si/SiO2 patterns. The mechanism underlying the effect of nitrogen containing carbon sources on nanotube formation was explored using X-ray photoelectron spectroscopy (XPS).

Acetonitriles↗
PubMed2005

Ribbon- and boardlike nanostructures of nickel hydroxide: synthesis, characterization, and electrochemical properties.

We report the synthesis, characterization, and electrochemistry properties of ribbon- and boardlike nanostructures of nickel hydroxide, which crystallize in different phases. The ribbonlike nanostructures (nanoribbons) of nickel hydroxide were synthesized by treating amorphous alpha-Ni(OH)2 with high concentrations of nickel sulfate. These nanoribbons crystallized in a new phase had typical widths of 5-25 nm, thicknesses of 3-9 nm, and lengths of up to a few micrometers. After further treatment in alkali at 60 degrees C, the nanoribbons converted to boardlike nanostructures (nanoboards), which crystallized in the beta-phase with the average length-width-thickness ratio of 20:6:1. The crystal structures, Raman spectra, and electrochemical properties of these nanostructures of nickel hydroxide are described in this paper. For comparison, the amorphous alpha-Ni(OH)2 has also been investigated. Moreover, the intermediate product between the nanoribbons and the nanoboards displays a unique structure, which implied an interesting transformation process. The nanoribbons with the new phase show some unique features in Raman spectra, two new peaks located at 3534 and 3592 cm(-1) in the OH stretching region, indicating the new chemical environment of the hydroxyl groups. The nanoboards exhibit the highest specific capacity, which is close to the theoretical capacity of beta-Ni(OH)2. It suggests that the boardlike nanostructure is helpful in improving the electrochemical performance of nickel hydroxide. Because of their unique structures and properties, the nanoribbons and nanoboards of nickel hydroxide may give a new perspective for applications in the areas of catalysts and rechargeable batteries.

Journal Article↗
PubMed2005

Electric-field-enhanced assembly of single-walled carbon nanotubes on a solid surface.

We report a novel electric-field-enhanced chemical assembly approach for fabricating highly aligned SWNT arrays on a solid surface with remarkably improved efficiency and packing density, which is very important for the real applications of carbon nanotube arrays. With the enhancement of the electric field, the assembling kinetics of SWNTs is remarkably speeded up to effectively decrease the assembling time, and the packing density can even exceed the saturated density of conventional assembly method by four times within only half an hour. The molecular dynamics simulation results illustrated the alignment of SWNTs with their long axes along the electric flux in solution, leading to the increase of packing density and efficiency through overcoming the steric hindrance of the "giant" carbon nanotubes.

Journal Article↗
PubMed2005

Thermochemical hole burning on a triethylammonium bis-7,7,8,8-tetracyanoquinodimethane charge-transfer complex using single-walled carbon nanotube scanning tunneling microscopy tips.

The present article describes a thermochemical hole burning (THB) effect on a charge-transfer complex triethylammonium bis-7,7,8,8-tetracyanoquinodimethane (TEA(TCNQ)(2)) using single-walled carbon nanotube (SWNT) scanning tunneling microscopy (STM) tips, which demonstrates the possibility of optimizing the THB storage materials and the writing tips for ultrahigh-density data storage. TEA(TCNQ)(2) is proven to be a high-performance THB storage material, which gives deeper holes and larger hole depth-to-diameter ratio as compared to the previous materials dipropylammonium bis-7,7,8,8-tetracyanoquinodimethane and N-methyl-N-ethylmorpholinium bis-7,7,8,8-tetracyanoquinodimethane. Instead of conventional Pt/Ir STM tips, SWNT tips made by a unique chemical assembly technique we developed have been shown to be excellent writing tips for greatly decreasing the hole sizes and increasing the storage density. Possible reasons for the improvements on the storage performance were discussed.

Journal Article↗
PubMed2005

Reproducible patterning of single au nanoparticles on silicon substrates by scanning probe oxidation and self-assembly.

This paper describes a rational approach for reproducibly patterning single Au nanoparticles, 15-20-nm diameter, on silicon wafer substrates. The approach uses scanning probe oxidation (SPO) to pattern silicon oxide nanodomain arrays on silicon substrates modified with octadecyltrimethoxysilane (OTS). It was usually found using aminopropyltrimethoxysilane (APS) that Au nanoparticles only assembled at the domain boundaries probably because of asymmetrically distributed hydroxyl groups. To generate uniformly distributed hydroxyl groups on oxide domains, we employed a two-step treatment to etch and oxidize the substrate. With this treatment, oxide domains consistently attached Au nanoparticles to maximum capacity. Single Au nanoparticles were readily patterned by fabricating oxide nanodomains with a diameter below 30 nm. We also investigated the deposition of APS on OTS monolayers, which resulted in the assembly of Au nanoparticles outside of the oxide domains, and proposed two alternative methods to inhibit it.

Journal Article↗
PubMed2005

Single-walled carbon nanotube-based coaxial nanowires: synthesis, characterization, and electrical properties.

We report herein the template-directed synthesis, characterization, and electric properties of single-walled carbon nanotube- (SWNT-) based coaxial nanowires, that is, core (SWNT)-shell (conducting polypyrrole and polyaniline) nanowires. The SWNTs were first dispersed in aqueous solutions containing cationic surfactant cetyltrimethylammonium bromide (CTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonyl phenyl ether (O pi-10). Each individual nanotube (or small bundle) was then encased in its own micellelike envelope with hydrophobic surfactant groups orientated toward the nanotube and hydrophilic groups orientated toward the solution. And thus a hydrophobic region within the micelle/SWNT (called a micelle/SWNT hybrid template) was formed. Insertion and growth of pyrrole or aniline monomers in this hybrid template, upon removal of the surfactant, produce coaxial structures with a SWNT center and conducting polypyrrole or polyaniline coating. Raman and Fourier transform infrared (FTIR) spectroscopy and scanning (SEM) and transmission (TEM) electron microscopy were used to characterize the composition and the structures of these coaxial nanowires. The results revealed that the micellar molecules used could affect the surface morphologies of the resulting coaxial nanowires but not the molecular structures of the corresponding conducting polymers. Electric properties testing indicated that the SWNTs played the key roles in the conducting polymer/SWNT composites during electron transfer in the temperature range 77 K to room temperature. Compared with the SWNT network embedded in the conducting polymers, the composites within which SWNTs were coated perfectly by the identical conducting polymers exhibited higher barrier heights during electron transfer.

Aniline Compounds↗