PubMed Health⌕ Search

PubMed · 10176359

Evolving issues in laser safety.

Abstract

The approach to laser safety has come a long way since the 1960s when the first guidelines were issued by defense research organizations in the US and the UK, and then by the American Conference of Governmental Industrial Hygienists. Although the search for 'eye-safe' numbers continues in a few laboratories, this work is almost exclusively centered on deriving retinal thresholds for ultra-short (sub-nanosecond) lasers. Setting limits in this temporal region has been difficult, since there are conflicting data sets and there is a limited amount of data to extrapolate to other spectral regions. In the standards arena, the concentrated efforts have been in terms of product classification and attempts to resolve the eternal question of 'how safe is safe?'. Recent efforts to revise safety standards have not always taken into account the historical rationale for the maximum permissible exposures and forget that safety factors were already factored into the limits and further safety factors are quite unnecessary. Finally, the study of accidents raises the question of whether our approach to eye protection and enclosures are adequate and whether separate standards and guidance is needed for different applications.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D H Sliney. 1997. Evolving issues in laser safety.. https://doi.org/10.2351/1.4745473

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Catheter tracking for MR fluoroscopy: design of a transmit/receive coil for use with a nasogastric tube.

A coil tuned to 21.3 MHz was incorporated into a nasogastric tube and used as a marker of tube position during magnetic resonance (MR) imaging in a 0.5-T scanner. Catheter tracking was investigated with the coil used in both transmit/receive and in receive-only modes. Data acquired from this coil were overlaid on images obtained using the body coil of the scanner. Visualization of the full length of the catheter with local high signal at the tip was achieved with a temporal resolution of approximately 1 second. J. Magn. Reson. Imaging 2001;13:127-130.

Equipment Design↗

Use of multicoil arrays for separation of signal from multiple slices simultaneously excited.

Increased acquisition efficiency has been achieved by exciting several slices simultaneously. The mixed data were unfolded to produce separate slices using the spatial encoding information inherent in a multicoil receiver system. Each coil yields a linear combination of signals from all excited slices weighted by the sensitivity of each coil. A matrix inversion provides a solution to unfold these images.

Equipment Design↗

Application of the SUSHI method to the design of gradient coils.

An approach to potential improvements in magnetic field shielding for a gradient coil system with cylindrical geometry is presented, utilizing "supershielding" conditions for the currents on both the primary and the secondary coils. It is demonstrated that the field can be strongly suppressed everywhere outside a cylindrical shield coil radius, even though the finite-length active shield only partially surrounds a primary coil. The supershielding method, which is aimed at controlling eddy currents, still has sufficient freedom to maintain the desired magnetic field behavior inside the imaging volume. The trade-off is an additional primary current oscillation and increased current peaks and field energy. This method has been applied to design short transverse and axial gradient coils, giving substantially improved shielding compared to an apodization method. Magn Reson Med 45:147-155, 2001.

Equipment Design↗