PubMed · 10238633
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
M N Villecco. 1978. Some lessons drawn from the redesign process.. https://pubmed.ncbi.nlm.nih.gov/10238633/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The trickle-bed air biofilter (TBAB) performance for the removal of high-strength styrene was evaluated under different gas flow rates and influent concentrations. Under pseudo-steady-state conditions, the elimination capacity increased but the removal efficiency decreased with the increase of styrene loading. More than 90 and 80% removal efficiencies were achieved for influent styrene loadings below 32 and 55g/m(3)/h, respectively. The TBAB appears to be an effective treatment process for controlling high-strength styrene emission under low-to-medium loading conditions, and the effectiveness could be maintained over 140 days of laboratory operation.
We report the formation of a three-dimensionally ordered array of air bubbles of monodisperse pore size in a polymer film through a templating mechanism based on thermocapillary convection. Dilute solutions of a simple, coil-like polymer in a volatile solvent are cast on a glass slide in the presence of moist air flowing across the surface. Evaporative cooling and the generation of an ordered array of breath figures leads to the formation of multilayers of hexagonally packed water droplets that are preserved in the final, solid polymer film as spherical air bubbles. The dimensions of these bubbles can be controlled simply by changing the velocity of the airflow across the surface. When these three-dimensionally ordered macroporous materials have pore dimensions comparable to the wavelength of visible light, they are of interest as photonic band gaps and optical stop-bands.
A two stage intervention study was carried out to establish the degree to which a newly developed, electrostatic air cleaning (EAC) system can improve indoor air quality (IAQ) by reducing the number of airborne fine particles. The IAQ and how employees in a city centre office (49 m2) perceived it, was monitored from May until November 1998. The number of fine particles, PM3 (0.3-3.0 microm); number of coarse particles, PM7 (3.0-7.0 microm); number of small positive and negative air ions; relative humidity and temperature were recorded in and out of doors. To assess the employees' perception of any changes in their work environment, a questionnaire was completed. Number of particles, relative humidity and temperature were also recorded in a nearby office, equipped with an identical air processor, where no interventions were made. The results from the first intervention (Stage 1), comparing number of airborne particles outdoors to indoors, gave a 19% reduction for PM3 and a 67% reduction for PM7 (P < 0.001). The reduction in PM3 was inconsistent and not statistically significant (P = 0.3). The reduction in PM7 from outdoors and the removal of PM7 created indoors was achieved by optimizing the existing air moving equipment. The results from the second intervention (Stage 2--with EAC units installed) comparing indoor to outdoor values, gave a further reduction in PM3 of 21% (P < 0.001) and a further 3% reduction for PM7 (P > 0.05). Therefore, at the end of Stage 2, the total reductions in particles from outdoors to indoors were 40% for PM3 and 70% for PM7 (P < 0.001). The Stage 2 results strongly suggest that electrostatic forces, created by the EAC unit(s) improved the removal of PM3, with no further significant improvement in the reduction of PM7. The questionnaire indicated an improvement in the IAQ, as perceived by the employees. The results suggest that the EAC system is effective in reducing PM3 and thereby improving IAQ in an urban office.