PubMed · 10290154
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
K G Russell. 1988. Waste disposal: current developments.. https://pubmed.ncbi.nlm.nih.gov/10290154/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Capturing the spatiotemporal distribution of pollutants in industrial parks remains challenging for regional air quality models because of their coarse resolution (3 km), resulting in uncertainties in local emission quantification. To address this, we developed the Integrated Multiscale Air Quality Modelling System for Industry (IAQMS-Industry), coupling the regional Nested Air Quality Prediction Modelling System (NAQPMS) with a city-scale chemical transport model. This framework integrates point-source locations and Gaussian plume dispersion to simulate particulate matter with a diameter smaller than 2.5 micrometres (PM2.5) at 100 m resolution. Applied to the Beijing Yi Zhuang and Tangshan industrial parks and evaluated against observations. The coupled model achieved a normalized mean bias (NMB) ranging from 3.1 % to 6.2 %, improving upon NAQPMS (-16.9 % to -7.7 %). Spatial analysis revealed that coarse regional grids underestimated the PM2.5​ concentrations at industrial sites by smoothing gradients, whereas IAQMS-Industry successfully resolved spatial patterns. Industrial point emissions accounted for 22.9 %-26.4 % of PM2.5 in the coupled model, which was significantly greater than the regional model estimates of 1.6 %-13.7 %. These findings indicate that regional models overestimate pollutant dispersion processes in industrial parks while underestimating local industrial impacts. By explicitly resolving point-source dynamics and linking them to regional transport, IAQMS-Industry provides a robust tool for designing targeted emission controls in industrial cities and balancing local air quality improvements with minimized regional pollution outflow. This study underscores the necessity of multiscale modelling for accurate source apportionment and informed environmental governance in industrial zones.
Catalytic incineration is one of the cost-effective technologies to solve the troublesome volatile organic compounds (VOCs). However, some sulfur containing VOCs, such as dimethyl sulfide, may deactivate the Pt catalyst that is commonly used in the catalytic incineration process. This paper provides information on the poisoning effect of (CH3)2S. The catalytic incineration of (CH3)2S, typically emitted from the petrochemical industry, over a Pt/Al(2)O(3) fixed bed catalytic reactor was studied. The effects of operating parameters including inlet temperature, space velocity, (CH3)2S concentration, O2 concentration and catalyst size were characterized. Catalytic incineration on a mixture of (CH3)2S with CH(3)SH was also tested. The results show that the conversions of (CH3)2S increase as the inlet temperature increases and the space velocity decreases. The higher the (CH3)2S concentration is, the lower its conversion is. The O2 concentration has a positive effect on the conversion of (CH3)2S. (CH3)2S has a poisoning effect on the Pt/Al(2)O(3) catalyst, especially at lower temperatures. The conversion of (CH3)2S is significantly suppressed by the existence of CH(3)SH.
Explore the source record for details and available documents.