PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 10310288

Biomedical engineering in Germany (West).

G E Baugut
View original source ↗Export metadata ↓

Abstract

A research project is described that has developed a model for 11 Biomedical Engineering developments in German hospitals. Funded by the Federal Minister for Research and Technology and contractually evaluated within a cost-effectiveness study, data have been collected and analyzed. Based on this study, some observations on the further quantitative and qualitative department of Biomedical Engineering in German hospitals have been made.

Explore related subjects

Biomedical EngineeringCost-Benefit AnalysisGermany, WestMaintenance and Engineering, HospitalPilot ProjectsJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G E Baugut. Biomedical engineering in Germany (West).. https://doi.org/10.1097/00004669-198307000-00004

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗