PubMed · 10314994
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
C B Spearman. 1975. The Bourdon regulator.. https://pubmed.ncbi.nlm.nih.gov/10314994/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
The chemistry of technetium in certain high-level nuclear waste (HLW) tanks at the Hanford Site complicates the treatment and vitrification of HLW. A major problem is the presence, in certain tanks, of unidentified, lower-valent technetium species, which are difficult to remove from the waste by current separation processes. Radiolytic reduction of TcO4- in alkaline solutions containing selected organic compounds, approximating the conditions in HLW, was investigated to determine the classes of compounds that can be formed under these conditions. Insoluble TcO2 x xH2O is the primary radiolysis product with the majority of organic compounds investigated, including citrate, dibutyl phosphate, and aminopolycarboxylates. X-ray absorption fine structure (XAFS) measurements show that TcO2 x xH2O has a one-dimensional chain structure consisting of edge-sharing TcO6 octahedra with bridging oxide and trans water ligands. When diols, such as ethylene glycol, are present, only soluble, Tc(IV) alkoxide compounds are produced. The XAFS and UV-visible spectra of these compounds provide evidence for a binuclear structure similar to (H2EDTA)2Tc2(mu-O)2. The properties of the Tc(IV) alkoxide complexes were determined and are consistent with those observed for the soluble, lower-valent technetium complexes that complicate the treatment of HLW at the Hanford site.
Increased demands on energy savings and quality control in metallurgical processes have created incentives for new methods to monitor and control the process. In this paper we will present a field trial that shows the potential of tunable diode-laser spectroscopy (TDLS) for simultaneous contact free measuring and monitoring of the oxygen concentration as well as the gas temperature in a reheating furnace during production. The field trials were carried out at an oil-fueled reheating furnace during 7 weeks of production. The tunable diode-laser spectrometer was measuring in situ across the preheating zone and the soaking zone in the furnace. During the campaign the oxygen concentration and the gas temperature in the furnace environment were simultaneously monitored and instantaneous variations in these parameters could easily be recorded and subsequently correlated to actual changes in the process. Furthermore, the much shorter response-time of the TDLS technique compared with conventional measurement methods such as thermocouples and extractive gas analyzers was also demonstrated during the trials. The results show the potential for the TDLS technique to be used for energy savings as well as product quality improvements by controlling the burners in the reheating furnace. The results show that it would be possible to control and optimize the oxygen concentration with TDLS in the control loop of the reheating furnace.
The feasibility of codigestion of the organic fraction of municipal solid waste, primary sludge, and waste activated sludge was evaluated in mesophilic (37 degrees C), laboratory-scale digesters. In a first experiment, different startup strategies were compared using four digesters, operated under continuously mixed conditions. After two weeks, the experiment was continued under minimally mixed conditions. Results demonstrated that reducing the level of mixing improved digester performance. Therefore, in a second experiment, six digesters were operated to compare performance under continuous mixing and reduced mixing levels at various loading rates and solids levels. The continuously mixed digesters exhibited unstable performance at the higher loading rates, while the minimally mixed digesters performed well for all loading rates evaluated. In a third experiment, it was demonstrated that an unstable, continuously mixed digester was quickly stabilized by reducing the mixing level. These experiments confirmed that continuous mixing was not necessary for good performance and was inhibitory at higher loading rates. In addition, reduction of mixing levels may be used as an operational tool to stabilize unstable digesters.