PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 10344771

Preparation for TEM of layered samples with fragile microstructure and weak layer interface.

A K Westman·L Y Wei·F Barre
View original source ↗Export metadata ↓

Abstract

The objective of this work was to prepare for transmission electron microscopy (TEM) a layered structure of materials with fragile microstructure. The samples consisted of two layers of different materials, silicon nitride and borosilicate glass, loosely bonded together. The low strength of the sample resulted in fragmentation during more conventional preparation. However, it was possible to prepare the fragments by mounting them in a titanium specimen carrier with aluminium strips as support. After grinding and polishing, a technique of low-angle ion milling was used to obtain electron beam transparent areas at the nitride/glass interface.

Explore related subjects

Microscopy, ElectronTissue EmbeddingJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A K Westman, L Y Wei, F Barre. 1999-05-01. Preparation for TEM of layered samples with fragile microstructure and weak layer interface.. https://doi.org/10.1002/(sici)1097-0029(19990501)45%3A3%3C198%3A%3Aaid-jemt7%3E3.0.co%3B2-e

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2006

Synthesis of soluble phosphate polymers by RAFT and their in vitro mineralization.

Soluble linear (non-cross-linked) poly(monoacryloxyethyl phosphate) (PMAEP) and poly(2-(methacryloyloxy)ethyl phosphate) (PMOEP) were successfully synthesized through reversible addition-fragmentation chain transfer (RAFT)-mediated polymerization and by keeping the molecular weight below 20 K. Above this molecular weight, insoluble (cross-linked) polymers were observed, postulated to be due to residual diene (cross-linkable) monomers formed during purification of the monomers, MOEP and MAEP. Block copolymers consisting of PMAEP or PMOEP and poly(2-(acetoacetoxy)ethyl methacrylate) (PAAEMA) were successfully prepared and were immobilized on aminated slides. Simulated body fluid studies revealed that calcium phosphate (CaP) minerals formed on both the soluble polymers and the cross-linked gels were very similar. Both the PMAEP polymers and the PMOEP gel showed a CaP layer most probably brushite or monetite based on the Ca/P ratios. A secondary CaP mineral growth with a typical hydroxyapatite (HAP) globular morphology was found on the PMOEP gel. The soluble PMOEP film formed carbonated HAP according to Fourier transform infrared (FTIR) spectroscopy. Block copolymers attached to aminated slides showed only patchy mineralization, possibly due to the ionic interaction of negatively charged phosphate groups and protonated amines.

Microscopy, Electron↗
PubMed2005

Porous structure of natural and modified clinoptilolites.

The evaluation of the pore-size distribution (PSD) of natural and modified mesoporous zeolites, i.e., clinoptilolites is presented. We demonstrate the SEM results showing that the pores of fracture-type from 25-50 nm to 100 nm in size between clinoptilolite grains, as well as pores between crystal aggregates up to 500 nm in size are present in the studied material. The detailed distribution of pore sizes and tortuosity factor of the above-mentioned materials are determined from the adsorption-desorption isotherms of nitrogen measured volumetrically at 77 K. To obtain the reliable pore size distribution (PSD) of the above-mentioned materials both adsorption and desorption branches of the experimental hysteresis loop are described simultaneously by recently developed corrugated pore structure model (CPSM) of Androutsopoulos and Salmas. Evaluated pore size distributions are characterized by well-defined smooth peaks placed in the region of the mesoporosity. Moreover, the mean pore diameter calculated from the classical static measurement of nitrogen adsorption at 77 K correspond very well to the pore diameters from SEM, showing the applicability of the CPSM for characterization of the porosity of natural zeolites. We conclude that classical static adsorption measurements combined with the proper modeling of the capillary condensation/evaporation phenomena are a powerful method which can be applied for pore structure characterization of natural and modified clinoptilolites.

Microscopy, Electron↗