Simple method for carbon determination in microbiological experiments.

B Novák

doi:10.1016/s0044-4057(76)80022-6

Home/Archive/PubMed

PubMed · 1037054

Simple method for carbon determination in microbiological experiments.

B Novák

View original source ↗Export metadata ↓

Abstract

A wet combustion method for the carbon determination was developed. It has been proved that the method can be successfully used for the determination of biochemical changes in microbe cultures, the soil, in composts, in farmyard manures etc. The samples are combusted in evacuated flasks by means of chromic sulphuric mixture, and the CO(2) evolved is determined interferometrically.

Explore related subjects

Carbon Methods Soil Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

B Novák. 1976. Simple method for carbon determination in microbiological experiments.. https://doi.org/10.1016/s0044-4057(76)80022-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2025

Phenotypic profiling of carbon utilization of Pectobacterium brasiliense (Pbr1692).

Pectobacterium brasiliense 1692 (Pbr1692) is a necrotrophic pathogen that infects many crops such as potatoes and ornamental plants and derives nutrients from degraded plant tissue. Previous studies have identified Pbr1692 genes required for ecological fitness and virulence, however there is a lack of information on nutrient utilization in Pbr1692. Carbon source utilization profiling in Pbr1692 could provide a platform to decipher its metabolic flexibility and adaptation. This study assessed the nutrient utilization of Pbr1692 in different carbon sources, using Biolog Phenotypic Microarray (PM). An array of carbon sources utilized by Pbr1692 were identified, 32 carbohydrates and 8 carboxylic acids were among the preferred carbon nutrients utilized by Pbr1692. The PM results also revealed that the citric acid cycle, amino acid metabolism, and pentose phosphate metabolic pathways might be used to produce energy for Pbr1692. In addition, growth of Pbr1692 cells in minimal medium supplemented with citric acid, glucose, and aspartic acid retained the typical rod shape, suggesting that nutrient variation did not influence Pbr1692 cell morphology adaptation. This study provides an understanding on the adaptation of Pbr1692 and lays a foundation for understanding carbon metabolism of Pbr1692.

Carbon↗

PubMed1992

Supercritical fluid extraction of polychlorinated biphenyls and pesticides from soil. Comparison with other extraction methods.

A comparison is made of supercritical fluid extraction (SFE) with two other techniques widely used for the extraction of polychlorinated biphenyls (PCBs) and organochlorine pesticides in soil. Extraction conditions for the SFE of PCBs and pesticides were first determined. An experimental approach was set up to determine the influence of different extraction parameters such as pressure, extraction time, static and dynamic extraction, restrictor type and collection solvent for off-line SFE. The use of carbon dioxide at 50 degrees C and 20 MPa, 10 min static followed by 20 min dynamic extraction with collection in iso-octane were been found to be the optimum conditions. Two types of soil, with a low and high content of organic carbon, respectively, spiked with 16 PCBs and organochlorine pesticides with a wide range of volatility and polarity at a level of 5 ng/g dry matter, were used as test materials. Conventional solvent extraction gives a good extraction yield for soil with a low content of organic carbon, but for peat soil the recoveries decrease dramatically to 30% for DDE, DDT and PCB 138 and 153. The recoveries with Soxhlet extraction are good, but an extra clean-up step before analysis is necessary. SFE gives good extraction yields for PCBs and organochlorine pesticides, varying between 85 and 105% with a reproducibility of 5% for each component for both types of soil. SFE is a fast, clean and reproducible method for the extraction of PCBs and organochlorine pesticides from these two soil matrices.

Carbon↗

PubMed1992

Retention of C60 and C70 fullerenes on reversed-phase high-performance liquid chromatographic stationary phases.

The separation of C60 and C70 fullerenes on four different polysiloxane stationary phases was examined. It was determined that polar solvents can be used as mobile phases effectively for the separation of fullerene molecules. Unlike previously published work, a polymeric octadecyl siloxane (ODS) stationary phase provided higher separation factors for C70/C60 than did monomeric ODS stationary phases or phenyl substituted stationary phases. For example, for a methanol-diethyl ether (50:50, v/v) mobile phase and C60, k' approximately 5.0 separation factors, alpha = 3.3, were achieved with polymeric ODS compared to alpha = 2.2, with a monomeric ODS stationary phase. A linear solvation energy relationship (LSER) was used to model the importance of solvent interactions and stationary phase interaction to solute retention.

Carbon↗