Bioreactor development for tissue-engineered cartilage.

F Wu; N Dunkelman; A Peterson; T Davisson; R De La Torre; D Jain

doi:10.1111/j.1749-6632.1999.tb08523.x

Home/Archive/PubMed

PubMed · 10415587

Bioreactor development for tissue-engineered cartilage.

F Wu·N Dunkelman·A Peterson·T Davisson·R De La Torre·D Jain

View original source ↗Export metadata ↓

Abstract

The development of tissue engineered cartilage is emerging as a potential treatment for the repair of cartilage defects. By seeding chondrocytes onto poly-glycolic acid (PGA) biodegradable scaffolds within a convective-flow bioreactor, the synthesis of tissue-engineered articular cartilage has been recently demonstrated. The ability to cultivate and manipulate this cell-polymer construct to possess specific dimensions, as well as biochemical and biomechanical properties is critical for potential application as an in vivo therapy of damaged articular surfaces. Bioreactor design requirements for stages from research to development to commercialization are discussed. Advantages and limitations to various bioreactor designs are critiqued. These studies illustrate the ability to synthesize tissue-engineered cartilage under convective-flow conditions for potential human tissue repair.

Explore related subjects

Bioreactors Cartilage Cell Adhesion Culture Techniques Equipment Design Humans Journal Article Research Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

F Wu, N Dunkelman, A Peterson, T Davisson, R De La Torre, D Jain. 1999-06-18. Bioreactor development for tissue-engineered cartilage.. https://doi.org/10.1111/j.1749-6632.1999.tb08523.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2025

Unraveling the ecological success of Iodidimonas in a bioreactor treating oil and gas produced water.

UNLABELLED: Iodidimonas sp., a bacterium found in bioreactors treating oil and gas produced water as well as iodide-rich brines, has garnered attention for its unique ability to oxidize iodine. However, little is known about the metabolic capabilities that enable Iodidimonas sp. to thrive in certain unique ecological niches. In this study, we isolated, characterized, and sequenced three strains belonging to the Iodidimonas genus from the sludge of a membrane bioreactor used for produced water treatment. We investigated the genomic features of these isolates and compared them with the four publicly available isolate genomes from this genus, as well as a metagenome-assembled genome from the source bioreactor. Our Iodidimonas isolates had several genes associated with mitigating salinity, heavy metal, and organic compound stress, which likely help these bacteria to survive in produced water. Phenotyping tests revealed that while the isolates could utilize a wide variety of simple carbon substrates, they failed to degrade aliphatic or aromatic hydrocarbons, consistent with the lack of genes associated with common hydrocarbon degradation pathways in their genomes. We hypothesize that these microbes may lead a scavenging lifestyle in the bioreactor and similar iodide-rich brines. IMPORTANCE: Occupying a niche habitat and having few representative isolates, the genus Iodidimonas is a relatively understudied alphaproteobacterial group. Its ability to corrode pipes in iodine production facilities has economic implications, and its ability to generate potentially carcinogenic iodinated organic compounds during treatment of oil and gas produced water may cause environmental and health concerns with the recycling of treated water. Therefore, detailed characterization of the metabolic potential of the Iodidimonas isolates in this study both sheds light on their adaptation to the environmental conditions they inhabit and has environmental and economic significance.

Bioreactors↗

PubMed2002

Effect of particle-particle shearing on the bioleaching of sulfide minerals.

The biological leaching of sulfide minerals, used for the production of gold, copper, zinc, cobalt, and other metals, is very often carried out in slurry bioreactors, where the shearing between sulfide particles is intensive. In order to be able to improve the efficiency of the bioleaching, it is of significant importance to know the effect of particle shearing on the rate of leaching. The recently proposed concept of ore immobilization allowed us to study the effect of particle shearing on the rate of sulfide (pyrite) leaching by Thiobacillus ferrooxidans. Using this concept, we designed two very similar bioreactors, the main difference between which was the presence and absence of particle-particle shearing. It was shown that when the oxygen mass transfer was not the rate-limiting step, the rate of bioleaching in the frictionless bioreactor was 2.5 times higher than that in a bioreactor with particle friction (shearing). The concentration of free suspended cells in the frictionless bioreactor was by orders of magnitude lower than that in the frictional bioreactor, which showed that particle friction strongly reduces the microbial attachment to sulfide surface, which, in turn, reduces the rate of bioleaching. Surprisingly, it was found that formation of a layer of insoluble iron salts on the surface of sulfide particles is much slower under shearless conditions than in the presence of particle-particle shearing. This was explained by the effect of particle friction on liquid-solid mass transfer rate. The results of this study show that reduction of the particle friction during bioleaching of sulfide minerals can bring important advantages not only by increasing significantly the bioleaching rate, but also by increasing the rate of gas-liquid oxygen mass transfer, reducing the formation of iron precipitates and reducing the energy consumption. One of the efficient methods for reduction of particle friction is ore immobilization in a porous matrix.

Bioreactors↗

PubMed2002

Simulation of algae growth in a bench-scale bubble column reactor.

The growth of the marine red microalga Porphyridium sp. in a bubble-column photobioreactor was simulated. The proposed model constitutes a dynamic integration of the kinetics of photosynthesis and photoinhibition with the fluid dynamics of the bubble column, including the effects of shear stress on the kinetics of growth. The kinetic data used in the model were obtained in independent experiments run in a thin-film photobioreactor with defined light/dark cycles. The maintenance term was modified to take into account the effects of liquid flow in the bioreactor on the growth rate. A hybrid method proposed for the approximate solution of the equations gave an appreciable reduction of the calculation time. Extrapolations of the model indicated the possibility of predicting the optimal diameter for an assembly of bubble column photobioreactors. Satisfactory fit was found with the experimental results of biomass growth in a 13-liter bubble column.

Bioreactors↗