PubMed Health⌕ Search

PubMed · 10547521

Digital imaging update.

Abstract

The source did not provide an abstract. Follow the original record for more information.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M Abelson. 1999. Digital imaging update.. https://doi.org/10.1016/s0889-5406(99)70001-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Effect of filler fraction and filler surface treatment on wear of microfilled composites.

OBJECTIVES: The aim of this study was to determine the effect of filler content and surface treatment on the wear of microfilled composites. METHODS: Four microfilled composites with different filler contents (A=20, B=25, C=30, and D=35 vol.%) were made with a light-cured resin (Bis-GMA/UDMA/TEGDMA). The surface treatment of the colloidal silica in each varied: F=functional silane, NF=non-functional silane, U=untreated. Silux Plus served as a control. Specimens were made in steel molds and cured in a light curing unit Triad II (40s/side). Abrasion and attrition wear were evaluated in vitro in a wear tester (OHSU oral wear simulator) with an abrasive slurry (poppy seeds + PMMA) and a human enamel antagonist. The average of five specimens was computed and compared using a ANOVA/Tukey's test at P < or = 0.05. The surface of the wear patterns and the distribution of filler particles were examined using a scanning electron microscope and digital imaging. RESULTS: As filler volume increased, wear was reduced regardless of filler treatment. Amounts of wear for specimens C and D were significantly lower than specimens A and B. Composites with functional silane treated microfiller (Group F) produced significantly less wear than those with non-functional microfiller (Group NF) at 30 and 35 vol.%, and less than the untreated microfiller (Group U) at 30 vol.%. Scanning electron microscopy of specimens of group NF showed large filler agglomerates (size > 1 microm) in the resin matrix, while specimens of group F and U showed fewer agglomerates. Digital imaging analysis revealed small filler clusters (size < or = 1 microm) in the resin matrix of all specimens. SIGNIFICANCE: Wear resistance of microfilled composites is enhanced by higher filler volumes irrespective of surface treatment, but good filler/matrix adhesion is needed to minimize wear.

Analog-Digital Conversion↗

Relative value of analog and digital teaching files.

RATIONALE AND OBJECTIVES: This study was performed to determine if it is financially reasonable for radiology residency programs that create and maintain their own teaching files to switch from analog teaching files (ATFs) to digital teaching files (DTFs). MATERIALS AND METHODS: Radiology residency program directors were surveyed electronically about the monetary value and importance of conventional ATFs and DTFs. The costs for maintaining each type of file were calculated at the authors' institution. RESULTS: Surveys were sent to the program directors of all 197 accredited radiology residencies. Responses were received from 48 (24%). DTFs were scored as more important than ATFs, but the difference was not significant (P = .22). DTFs were rated as less complete (P = .01) but more current (P << .001) than ATFs. DTFs included the American College of Radiology Learning File (85%), in-house productions (77%), and other commercially available products (63%). Thirty percent of respondents had a DTF integrated into a picture archiving and communication system, and 28% reported having a technician dedicated to the teaching file. Program directors ascribed total median dollar values of $250 and $3,000 per year to their ATFs and DTFs, respectively. The annual costs at the authors' institution were much higher than these ascribed values: $44,720 ($91 per case) for maintaining a DTF produced in house and $24,601 ($50 per case) for maintaining an ATF, excluding physician time. CONCLUSION: Program directors are more willing to pay for a DTF than an ATF. For both, the costs of maintenance are great and the relative monetary value is low.

Analog-Digital Conversion↗

Circulating nitrite anions are a directly acting vasodilator and are donors for nitric oxide.

Inhaled nitric oxide (NO) is a pulmonary vasodilator, but also acts systemically, causing negative cardiac inotropic effects and a fall in systemic vascular resistance. Circulating metabolites of NO are presumed to be responsible. We questioned the role of nitrite anions and the manner in which they might contribute to these effects. Nitrite and nitrate anions coexist in blood, while circulating levels of dissolved NO are very low. Nitrate anions are not biologically active, but nitrite anions may have a biological role through the release of NO. In vitro, at 37 degrees C and in aerated Krebs bicarbonate solution, the steady-state concentration of dissolved NO was proportional to the concentration of NO in the gas. Nanomolar concentrations of dissolved NO coexisted with micromolar concentrations of nitrite anions. The idea of an equilibrium between the two in solution was also supported by the observed release of NO from nitrite anions in the absence of gas. With rings of precontracted pig pulmonary arteries (prostaglandin F(2alpha); 10 micromol/l), the steady-state concentration of dissolved NO causing 50% relaxation (EC(50)) was 0.84+/-0.25 nmol/l, corresponding to a gaseous concentration of 2.2 p.p.m. The EC(50) of nitrite was 4.5+/-0.7 micromol/l, a concentration normally found in plasma. The estimated concentration of dissolved NO derived from this nitrite was 4.5 pmol/l, some 100 times lower than would be needed to cause relaxation. The rate of exhalation of NO was increased and pulmonary vascular resistance was reduced by the addition of nitrite solution to the perfusate of isolated perfused and ventilated pig lungs, but only when millimolar concentrations were achieved. Thus circulating nitrite anions are a direct vasodilator, only being a carrier of effective amounts of "free" NO at higher than physiological concentrations.

Analog-Digital Conversion↗