Immunoplatelet counting: a proposed new reference procedure.

Abstract

Given the high degree of interoperator error and poor precision of manual platelet counting, it has recently been proposed that an immunoplatelet counting method could become the new reference procedure. Platelets are identified immunologically with a suitable monoclonal antibody, and the platelet count is derived from the ratio of fluorescent platelet events to collected red blood cell (RBC) events that are also counted by a reliable and calibrated standard impedance counter (RBC ratio). In this study, we have set up a rapid and simple method for immunoplatelet counting and simultaneously compared the RBC ratio with the bead ratio derived from two different preparations of commercial calibration beads (Trucount and FlowCount beads). Comparison of the level of imprecision of the RBC ratio with either the manual count or bead ratios revealed a superior coefficient of variation of < 5% even in samples with a platelet count < 20 x 10(9)/l. The RBC ratio correlated extremely well with the existing manual phase reference method (r2 = 0.93) and especially well with three different commercial impedance counters and a dual-angle optical counter (r2 = 0.98-0.99). However, at < 100 x 10(9)/l, the correlation of the RBC ratio with the dual-angle optical count (ADVIA 120) (r2 = 0.96) was superior to all impedance counters. This suggests that automated optical counting methods may be more accurate at determining platelet counts in thrombocytopenic samples. As the RBC ratio is rapid, cheap and relatively easy to perform, we propose that this method could replace the manual count as a new international reference method.