PubMed Health⌕ Search

PubMed · 11051505

Nonlinear interactions that could explain distortion product interference response areas.

Abstract

Suppression and/or enhancement of third- and fifth-order distortion products by a third tone that can have a frequency more than an octave above and a level more than 40 dB below the primary tones have recently been measured by Martin et al. [Hear. Res. 136, 105-123 (1999)]. Contours of iso-suppression and iso-enhancement that are plotted as a function of third-tone frequency and level are called interference response areas. After ruling out order aliasing, two possible mechanisms for this effect have been developed, a harmonic mechanism and a catalyst mechanism. The harmonic mechanism produces distortion products by mixing a harmonic of one of the primary tones with the other primary tone. The catalyst mechanism produces distortion products by mixing one or more intermediate distortion products that are produced by the third tone with one or more of the input tones. The harmonic mechanism does not need a third tone and the catalyst mechanism does. Because the basilar membrane frequency response is predicted to affect each of these mechanisms differently, it is concluded that the catalyst mechanism will be dominant in the high-frequency regions of the cochlea and the harmonic mechanism will have significant strength in the low-frequency regions of the cochlea. The mechanisms are dependent on the existence of both even- and odd-order distortion, and significant even- and odd-order distortion have been measured in the experimental animals. Furthermore, the nonlinear part of the cochlear mechanical response must be well into saturation when input tones are 50 or more dB SPL.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

P F Fahey, B B Stagner, B L Lonsbury-Martin, G K Martin. 2000. Nonlinear interactions that could explain distortion product interference response areas.. https://doi.org/10.1121/1.1308048

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Effects of gamma irradiation on mechanical properties of defatted trabecular bone allografts assessed by speed-of-sound measurement.

New sterilization methods for human bone allografts may lead to alterations in bone mechanical properties, which strongly influence short- and medium-term outcomes. In many sterilization procedures, bone allografts are subjected to gamma irradiation, usually with 25 KGy, after treatment and packaging. We used speed-of-sound (SOS) measurements to evaluate the effects of gamma irradiation on bone. All bone specimens were subjected to the same microbial inactivation procedure. They were then separated into three groups, of which one was treated and not irradiated and two were exposed to 10 and 25 KGy of gamma radiation, respectively. SOS was measured using high- and low-frequency ultrasound beams in each orthogonal direction. SOS and Young modulus were altered significantly in the three groups, compared to native untreated bone. Exposure to 10 or 25 KGy had no noticeable effect on the study variables. The impact of irradiation was small compared to the effects of physical or chemical defatting. Reducing the radiation dose used in everyday practice failed to improve graft mechanical properties in this study.

Acoustics↗

Objective and subjective evaluation of the acoustic comfort in classrooms.

The acoustic comfort of classrooms in a Brazilian public school has been evaluated through interviews with 62 teachers and 464 pupils, measurements of background noise, reverberation time, and sound insulation. Acoustic measurements have revealed the poor acoustic quality of the classrooms. Results have shown that teachers and pupils consider the noise generated and the voice of the teacher in neighboring classrooms as the main sources of annoyance inside the classroom. Acoustic simulations resulted in the suggestion of placement of perforated plywood on the ceiling, for reduction in reverberation time and increase in the acoustic comfort of the classrooms.

Acoustics↗

Analysis of effective radiating area, power, intensity, and field characteristics of ultrasound transducers.

OBJECTIVE: To characterize the ultrasound fields produced by a cohort of transducers from a single manufacturer via hydrophone and Schlieren technology. DESIGN: Descriptive study. SETTING: Measurement laboratory. PARTICIPANTS: Seven same-model ultrasound transducers from a single manufacturer. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Effective radiating area (ERA), total power, spatial average intensity (SAI), beam nonuniformity ratio (BNR), and Schlieren beam widths at 1.0 and 3.3 MHz. RESULTS: Values for ERA (1.0 MHz range, 3.62-4.38 cm(2); 3.3 MHz range, 3.74-4.76 cm(2)), total power (1.0 MHz range, 5.0-5.6 W; 3.3 MHz range, 4.7-5.7 W), SAI (1.0 MHz range, 1.2-1.4 W/cm(2); 3.3 MHz range, 1.0-1.5 W/cm(2)), and BNR (1.0 MHz range, 2.79-5.85; 3.3 MHz range, 2.51-4.56) fell within manufacturer's specifications and U.S. Food and Drug Administration (FDA) regulations. Schlieren analysis showed significantly larger beam widths at 3.3 MHz compared with 1.0 MHz and a large degree of variability in the ultrasound fields generated by the different transducers. There were no significant correlations between beam widths and ERA values. CONCLUSIONS: ERA and total power values in a test cohort exist within a range that met FDA regulations. Individual variability in ERA and total power resulted in 50% variability in SAI. This variability may help explain previous reports of heating differences between transducers.

Acoustics↗