Cyclodextrins as electrode modifiers.

A Ferancová; J Labuda

doi:10.1007/s002160100752

Home/Archive/PubMed

PubMed · 11393226

Cyclodextrins as electrode modifiers.

A Ferancová·J Labuda

View original source ↗Export metadata ↓

Abstract

Complexation abilities and analytical applications of working electrodes with attached cyclodextrins (CDs) are reviewed. For the immobilization of CDs, their adsorption and formation of self-assembled monolayers, preparation of polymer films, as well as incorporation within plasticized membranes and composites such as carbon paste and gels are considered. Some electrochemical investigations of the CD interactions in solution are also reported with respect to their use at CD modified electrodes.

Explore related subjects

Adsorption Cyclodextrins Electrodes Electrophoresis Gold Membranes, Artificial Models, Molecular Molecular Structure Polymers Stereoisomerism Journal Article Research Support, Non-U.S. Gov't Review

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

A Ferancová, J Labuda. 2001. Cyclodextrins as electrode modifiers.. https://doi.org/10.1007/s002160100752

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

PubMed2002

Bioelectronic device consisting of cytochrome c/poly-L-aspartic acid adsorbed hetero-Langmuir-Blodgett films.

A bioelectronic device consisting of protein-adsorbed hetero-Langmuir-Blodgett (LB) films was investigated. Four kinds of functional molecules, cytochrome c, viologen, flavin, and ferrocene, were used as a secondary electron acceptor (A2), a first electron acceptor (A1), a sensitizer (S), and an electron donor (D), respectively. To fabricate the cytochrome c adsorbed hetero-LB film, poly-L-aspartic acid was used as the bridging molecule. The hetero-LB film was fabricated by subsequently depositing ferrocene, flavin, and viologen onto the pretreated ITO glass. Cytochrome c-adsorbed hetero-LB films were prepared by the adsorption of cytochrome c onto the poly-L-aspartic acid treated-LB films by intermolecular electrostatic attraction. Finally, the MIM (metal/insulator/metal) structured molecular device was constructed by depositing aluminum onto the surface of the cytochrome c-adsorbed hetero-LB films. Hetero-LB films were analyzed by Atomic Force Microscopy (AFM), and cytochrome c adsorption onto the films confirmed. The photoswitching function was achieved and the photoinduced unidirectional flow was in accordance with the rectifying characteristics of the molecular device. The direction of energy flow was in accordance with the energy level profile across molecular films. Based on the measurement of the transient photocurrent of the molecular device efficient directional flow of photocurrent through the redox potential difference was observed. The photodiode characteristics of the proposed bio-electronic device were verified and the proposed molecular array mimicking the photosynthetic reaction center could be usefully applied as a model system for the development of the bio-molecular photodiode.

Adsorption↗

PubMed2002

A new fluid distribution system for scale-flexible expanded bed adsorption.

A new fluid distribution system designed for expanded bed adsorption was introduced and studied in a 150-cm diameter column. Based on fluid application through a rotating distributor, it eradicates the need for perforated plates, meshes, or local mixers. The effect of rotation rate on column performance was examined by fluidizing a 30-cm high bed of supports with tap water and introducing pulses of dye or acetone tracer. Linear bed expansion was seen as the superficial fluid velocity was raised from 170 x h(-1) to 450 cm x h(-1) (3000 L x h(-1) to 8000 L x h(-1)), and there was little change in expansion characteristics as distributor rotation rate was increased from 2.5 to 10 rpm. The distributor was observed to generate a flow pattern suitable for expanded bed adsorption when the supports were fluidized at a superficial fluid velocity of 283 cm center dot h(-1) and dye pulses introduced. At a rotation rate of 2.5 rpm, no significant dead zones were observed, and a discrete band was formed that moved up through the bed. Furthermore, the pattern of dye movement could be used to calculate interstitial linear fluid velocities of 460 cm x h(-1) and 572 cm x h(-1) at the column wall and center, respectively, indicating a parabolic flow profile. The distributor rotation rate giving the best operating conditions was found to be 2.5 rpm when the bed was fluidized at a flow velocity of 283 cm x h(-1) and the residence time distribution of acetone tracer examined. Under these conditions, the coefficient of axial dispersion was 6.1 x 10(-6) m(2) x s(-1) and 29 theoretical plates were measured. When the rotation rate was raised to 10 rpm, the coefficient of axial dispersion increased to 8.08 x 10(-6) m(2) x s(-1) and the number of theoretical plates decreased to 22.

Adsorption↗