PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 11476935

Low-reflection-coefficient liquid interfaces for system characterization.

T J Hall·E L Madsen·F Dong·I R Medina·G R Frank
View original source ↗Export metadata ↓

Abstract

The use of liquid brominated hydrocarbons to form a planar reflecting interface with water is described. Gravity-based planar reflecting surfaces with known reflection coefficients can be used in system characterization for quantitative ultrasonics, and a set of surfaces with a range of reflection coefficients allows calibration of the output power and receiver gain of ultrasonic imaging systems. The substances reported here are immiscible in water and form interfaces with water, resulting in a broad range of acoustic reflection coefficients. Reflection coefficients were measured at temperatures from 18-24 degrees C for "pure" substances and for mixtures of two brominated hydrocarbons. Results show that reflection coefficients are weakly dependent on temperature and that, at a specific temperature, a significant range of arbitrarily small reflection coefficients is available, in the case of the mixtures, by the appropriate choice of weight-percents of the two brominated hydrocarbons.

Explore related subjects

Hydrocarbons, BrominatedReference StandardsSurface PropertiesTemperatureUltrasonographyWaterJournal ArticleResearch Support, Non-U.S. Gov'tResearch Support, U.S. Gov't, Non-P.H.S.Research Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T J Hall, E L Madsen, F Dong, I R Medina, G R Frank. 2001. Low-reflection-coefficient liquid interfaces for system characterization.. https://doi.org/10.1016/s0301-5629(01)00391-x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2002

Flash photolytic generation and study of p-quinone methide in aqueous solution. An estimate of rate and equilibrium constants for heterolysis of the carbon-bromine bond in p-hydroxybenzyl bromide.

Flash photolysis of p-hydroxybenzyl acetate in aqueous perchloric acid solution and formic acid, acetic acid, biphosphate ion, and tris(hydroxymethyl)methylammonium ion buffers produced p-quinone methide as a short-lived species that underwent hydration to p-hydroxybenzyl alcohol in hydronium ion catalyzed (k(H(+)) = 5.28 x 10(4) M(-1) s(-1)) and uncatalyzed (k(uc) = 3.33 s(-1)) processes. The inverse nature of the solvent isotope effect on the hydronium ion-catalyzed reaction, k(H(+))/k(D(+)) = 0.41, indicates that this process occurs by rapid and reversible protonation of the quinone methide on its carbonyl carbon atom, followed by rate-determining capture of the p-hydroxybenzyl carbocation so produced by water, while the magnitude of the rate constant on the uncatalyzed process indicates that this reaction occurs by simple nucleophilic addition of water to the methylene group of the quinone methide. p-Quinone methide also underwent hydronium ion-catalyzed and uncatalyzed nucleophilic addition reactions with chloride ion, bromide ion, thiocyanate ion, and thiourea. The solvent isotope effects on the hydronium ion-catalyzed processes again indicate that these reactions occurred by preequilibrium mechanisms involving a p-hydroxybenzyl carbocation intermediate, and assignment of a diffusion-controlled value to the rate constant for reaction of this cation with thiocyanate ion led to K(SH) = 110 M as the acidity constant of oxygen-protonated p-quinone methide. In a certain perchloric acid concentration range, the bromide ion reaction became biphasic, and least-squares analysis of the kinetic data using a double-exponential function provided k(Br(-)) = 3.8 x 10(8) M(-1) s(-1) as the rate constant for nucleophilic capture of the p-hydroxybenzyl carbocation by bromide ion, k(ionz) = 8.5 x 10(2) s(-1) for ionization of the carbon-bromine bond of p-hydroxybenzyl bromide, and K = 4.5 x 10(5) M(-1) as the equilibrium constant for the carbocation-bromide ion combination reaction, all in aqueous solution at 25 degrees C. Comparisons are made of the reactivity of p-quinone methide with p-quinone alpha,alpha-bis(trifluoromethyl)methide as well as p-quinone methide with o-quinone methide.

Hydrocarbons, Brominated↗
PubMed2001

Raman and infrared spectra, conformational stability, ab initio calculations and assignment of fundamentals for 1-bromo-3-fluoropropane.

The infrared and Raman spectrum of 1-bromo-3-fluoropropane is reported in the gas, liquid, amorphous solid and annealed polycrystalline states. Only one of the five possible conformers is stable in the crystal, designated the C conformer. The disordered phases show the presence of several other conformers of higher energy, due entirely to conformers designated B and D. Ab initio calculations were performed as rhf/4-31g*/MIDI-4*, rhf/6-31g* and mp2/6-31g* (both frozen core and full electron correlation) for all five conformers. The scaled harmonic force field obtained using the mp2 = full/6-31g* level of the theory is reported for the most stable conformer together with an assignment of fundamentals and potential energy distributions for local symmetry coordinates. Selected computational results are reported for all conformers together with scaled and unscaled wavenumbers and infrared and Raman intensities. The temperature dependent Raman spectrum is reported from room temperature to -100 degrees C. Only three of the five possible conformers can be identified in this spectrum, and there is no evidence of the other two. The energy differences between conformers in the liquid phase were found experimentally to be 132+/-27, 232+/-46 and 106+/-30 cm(-1), respectively between the D and C, B and C and D and B conformers. These differences are substantially less than the differences calculated ab initio at the highest level of the theory used, suggesting that energy differences were decreased by large dipole-dipole interactions present in the liquid but not in the gas.

Hydrocarbons, Brominated↗
PubMed1998

[Determination of tetradecyl pyridyl bromide in waste water by flame atomic absorption spectrometry].

A indirect method for the determination of tetradecyl pyridyl bromide (TPB) was established (TPB) by flame atomic absorption spectrometry (FAAS). TPB was combined with cadmium tetrathocyanate to make neutral ion association compounds, which are extracted into xylene. The concentration of TPB can be indirectly determined by the absorption of cadmium in xylene layer with flame atomic absorption spectrometry. The linear range of TPB is 0.03-0.80 mg/L. The sensitivity is 0.0212 mg/L x 1%. When the method was applied to the analysis of waste water, the recovery is from 98% to 104% and the RSD is less than 9.16%.

Hydrocarbons, Brominated↗