PubMed Health⌕ Search

PubMed · 11537062

Life support systems for Mars transit.

Abstract

The long-held human dream of travel to the stars and planets will probably be realized within the next quarter century. Preliminary analyses by U.S. scientists and engineers suggests that a first trip to Mars could begin as early as 2016. A proposal by U.S.S.R. space planners has suggested that an effort involving the cooperation and collaboration of many nations could begin by 2011. Among the major considerations that must be made in preparation for such an excursion are solidification of the scientific, economic and philosophical rationales for such a trip made by humans, and realistic evaluations of current and projected technical capabilities. Issues in the latter category include launch and propulsion systems, long term system stability and reliability, the psychological and physiological consequences of long term exposure to the space environment, the development and use of countermeasures to deleterious human physiological responses to the space environment, and life support systems that are both capable of the immense journey and reliable enough to assure their continued operation for the duration of the voyage. Many of the issues important in the design of a life support system for a Mars trip are based on reasonably well understood data: the human requirements for food, oxygen and water. However, other issues are less well-defined, such as the demands that will be made on the system for personal cleanliness and hygiene, environmental cleanliness, prevention or reduction of environmental toxins, and psychological responses to the environment and to the diet. It is much too early to make final decisions about the characteristics of the long-duration life support system needed for travel to Mars, or for use on its surface. However, it is clear that life support systems will evolve during the next few decades form the relatively straightforward systems that are used on Shuttle and Soyuz, to increasingly more complex and regenerative systems. The Soviet Union has an operating life support system on Mir that can apparently evolve, and the United States is currently planning the one for Space Station Freedom that will use partial regeneration. It is essential to develop concepts now for life support systems on an advanced Space Station, the lunar outpost (to be launched in about 2004) and the lunar base. Such concepts will build on current technology and capabilities. But because of the variety of different technologies that can be developed, and the potential for coordinating the functions of very diverse sub-systems within the same life support system, the possibility of developing an efficient, reliable mixed process system is high. It is likely that a life support system for Mars transit and base will use a composite of physical, chemical, and biological processes. The purpose of this paper is to explore the potentially useful structural elements of a life support system for use on a Mars trip, and to identify the features that, at this time, appear to be most appropriate for inclusion in the system.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R D MacElroy, M Kliss, C Straight. 1992. Life support systems for Mars transit.. https://doi.org/10.1016/0273-1177(92)90022-p

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Exploiting the pressure effect on lipase-catalyzed wax ester synthesis in dense carbon dioxide.

The present work focuses on the thermodynamic interpretation of the lauryl oleate biosynthesis in high-pressure carbon dioxide. Lipase-catalyzed lauryl oleate production by oleic acid esterification with 1-dodecanol over immobilized lipase from Rhizomucor miehei (Lipozyme RM IM) was successfully performed in a sapphire window batch stirred tank reactor (BSTR) using dense CO(2) as reaction medium. The experiments were planned to elucidate the pressure effect on the reaction performance. With increasing the pressure up to 10 MPa, the catalytic efficiency of the studied enzyme improved rising up to a maximum and decreased at higher pressure values. Kinetic observations, exhibiting that dense CO(2) expanded reaction mixture in subcritical conditions led to higher performance than when diluted in a single supercritical phase, were elucidated by phase-equilibrium arguments. The experimental results were justified with emphasis on thermodynamic interpretation of the studied system. Particularly, the different reaction performances obtained were related to the position of the operating point with respect to the location of liquid-vapor phase boundaries of the reactant fatty acid/alcohol/CO(2) ternary system. The outlook for exploitation of CO(2) expanded phase at lower pressure compared to supercritical phase, with heterogeneous system in which the solid catalyst particles are exposed to dense CO(2) expanded reaction mixture, in developing new biotransformation schemes is promising.

Carbon Dioxide↗

Tailoring porous silica films through supercritical carbon dioxide processing of fluorinated surfactant templates.

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.

Carbon Dioxide↗

Electron photoemission from charged films: absolute cross section for trapping 0-5 eV electrons in condensed CO2.

The electron trapping or attachment cross section of carbon dioxide (CO2) condensed as thin films on a spacer of Ar is obtained using a simple model for electron trapping in a molecular film and then charge releasing from the same film by photon absorption. The measurements are presented for different electron exposures and impact energies, film thicknesses, and probing photon energies. The cross section for trapping an electron of incident energy between 0 and 5 eV reveals three different attachment processes characterized by a maximum at about 0.75 eV, a structured feature around 2.25 eV, and a shoulder around 3.75 eV. From the measurement of their dependence with the probing photon energy, the two lowest processes produce traps having a vertical electron binding energy of approximately 3.5 eV, whereas the highest one yields a slightly higher value of approximately 3.7 eV. The 0.75 eV maximum corresponds to the formation of vibrational Feshbach resonances in (CO2)n- anion clusters. The 2.25 eV feature is attributed to the formation of a vibrationally excited 2Piu anion in (CO2)n- clusters, followed by fast decay into its vibrational ground state without undergoing autodetachment. Finally, 3.75 eV shoulder is assigned to the well-known dissociative electron attachment process from 2Piu anion state producing the O- anion in the gas phase and the (CO2)nO- anions in clusters.

Carbon Dioxide↗