PubMed · 11700731
Miniaturized multichannel electrospray ionization emitters on poly(dimethylsiloxane) microfluidic devices.
Abstract
A multichannel electrospray ionization (ESI) emitter was fabricated as part of a poly(dimethylsiloxane) (PDMS) microfluidic device using a three-layer photoresist process which also produces a self-alignment system to make a bonding between the top and bottom PDMS parts. The prototype device (2 cm high x 5 cm wide x 5 cm long) had 16-channels (30 microm wide x 50 microm deep) with emitters of 1 mm length and 60 degrees point angle. The PDMS emitter tips enabled interfacing the device to ESI-mass spectrometry; a stable electrospray from the tips was performed with limits of detection under 1 microM for reference peptides (adrenocorticotropic hormone fragment 1-17, angiotensin I and III).
Explore related subjects
Keep this discovery
Explore connections, maps & timelines
J S Kim, D R Knapp. 2001. Miniaturized multichannel electrospray ionization emitters on poly(dimethylsiloxane) microfluidic devices.. https://doi.org/10.1002/1522-2683(200110)22%3A18%3C3993%3A%3Aaid-elps3993%3E3.0.co%3B2-x
Cite the original work for its findings. Save a collection to share your selection of sources.