PubMed Health⌕ Search

PubMed · 11710040

beta-Casein adsorption at the silicon oxide--aqueous solution interface.

Abstract

Neutron reflectometry was used to investigate the time-dependent beta-casein adsorption at the silica-aqueous solution interface. The transient and steady-state structural characteristics of the adsorbed layer were determined from reflectivity curves, fitted to three-layer and two-layer models. The results show that the beta-casein adsorption to silica is very slow. The adsorption process involves the formation of an inner dense protein layer with a mean thickness of about 30 A onto which a more hydrated outer layer is self-associated. The surface excess and the total layer thickness of the asymmetric bilayer were, after 5 h adsorption time, estimated to be about 6.5 mg/m2 and 105 A, respectively. The adsorption behavior observed on silica contrasts with that previously reported for hydrophobic substrates, where beta-casein adsorption is much more rapid and the final surface excess is less than half of that observed for silica. Rinsing the silica surface with protein-free buffer resulted in a substantial desorption; much more pronounced than observed for hydrophobic substrates. This behavior suggests a weak adsorption affinity for a fraction of the adsorbed casein molecules; most likely the outer self-associated casein molecules in the adsorbed bilayer. The comparative desorption from hydrophobic surfaces was shown to be marginal. The difference between the layer structures adopted on hydrophobic and hydrophilic surfaces is also mirrored in the effects that the addition of a specific proteolytic enzyme (endoproteinase Asp-N) has on the adsorbed layer properties. The rinsing and endoproteinase cleavage processes result together in more than 80% reduction of the originally adsorbed mass at the silica surface. Only a thin but dense adsorbed layer remains after these treatments. The corresponding reduction reported for the hydrophobic adsorbent system was only about 20%. It is concluded that beta-casein adsorption on silica results in the formation of an asymmetric surface bound bilayer that stands in strong contrast to the monolayer structure formed at hydrophobic surfaces. This finding support the previous results obtained by using ellipsometry. The study also shows that neutron reflection, despite its limitations in time resolution, can be used for studying dynamic interfacial phenomena in protein systems.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

F Tiberg, T Nylander, T J Su, J R Lu, R K Thomas. 2001. beta-Casein adsorption at the silicon oxide--aqueous solution interface.. https://doi.org/10.1021/bm0155221

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

Dual radiolabeling to study protein adsorption competition in relation with hemocompatibility.

Human fibrinogen (Fg) and albumin (HSA) were labeled with (3)H and (14)C, respectively. Dual counting allowed the adsorbed amount of the two proteins to be determined simultaneously. Single adsorption, adsorption of the two proteins in competition, but also exchange (substitution by molecules of the same nature) and displacement (desorption under the action of the other protein) experiments were performed on two model surfaces, glass and polystyrene (PS), as well as on pure polyvinylchloride (PVC-s) and on PVC from blood bag (PVC-b). As expected, the adsorbed amount of a single protein is higher on a hydrophobic compared to a hydrophilic surface. When the two proteins are adsorbed in competition, they are found in equal proportion on glass, while HSA is twice more abundant than Fg on PS and PVC-s and about six times more abundant on PVC-b. This trend is related to an increase of the water contact angle of the substrates. For PVC-b, the contact angle is affected by the presence of aliphatic components exposed at the extreme surface, as determined by angle-resolved X-ray photoelectron spectroscopy. In exchange and displacement experiments, the first adsorbed molecules remain dominating on PS while they can be removed from glass. Given the known importance of HSA and Fg adsorption for the fate of materials placed in contact with blood, the method described in this paper may be used as a first approach to orient the design of surfaces with improved hemocompatibility.

Adsorption↗

Effective immobilization of subunit protein in mesoporous silica modified with ethanol.

Ethoxylated FSM-type mesoporous silica (folded-sheet mesoporous material) with a pore diameter of 6.2 nm (FSM6.2) remarkably enhances rigidly of the structure in aqueous solutions. The esterified material could be used successfully as an adsorbent to accommodate subunit protein, methemoglobin (Fe(3+)). Furthermore, methemoglobin (Fe(3+)) in the pores of ethoxy-FSM is maintained a peroxidase activity similar to the native, indicating methemoglobin retains its fore subunit structure in the pores of FSM6.2.

Adsorption↗