PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 11710050

Decomposable hollow biopolymer-based capsules.

C Schüler·F Caruso
View original source ↗Export metadata ↓

Abstract

Decomposable hollow capsules based on deoxyribonucleic acid (DNA) and a low molecular weight organic molecule, a naturally occurring polyamine, spermidine (SP), were formed by applying the layer-by-layer adsorption strategy to colloid particles, viz., assembling DNA/SP multilayers on colloids and subsequently removing the templated core. For comparison, hollow capsules from the higher molecular weight biopolymers, alginate (ALG) and poly(lysine) (PL), were also prepared. The multilayers were first formed on polystyrene spheres, and their growth was followed by microelectrophoresis. The preparation of hollow capsules, derived from multilayer coating melamine formaldehyde core particles and then decomposing the core by acid treatment, was verified by atomic force microscopy and transmission electron microscopy. In contrast to the hollow ALG/PL capsules, the hollow DNA/SP capsules displayed a high sensitivity to salt solutions: Decomposition of the DNA/SP multilayers occurred after exposure to sodium chloride solutions. The hollow capsules prepared are attractive for the encapsulation and release of various substances; for example, the release of encapsulated compounds, such as dyes or drugs, can occur when loaded DNA/SP capsules are exposed to environmental (salt) conditions that decompose them, e.g., in the bloodstream.

Explore related subjects

AlginatesBiocompatible MaterialsBiodegradation, EnvironmentalBiopolymersCapsulesColloidsDNADrug CarriersMacromolecular SubstancesMicroscopy, Atomic ForcePolylysineSpermidineStatic ElectricityComparative StudyJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

C Schüler, F Caruso. 2001. Decomposable hollow biopolymer-based capsules.. https://doi.org/10.1021/bm010052w

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Protein engineering of Acidovorax facilis 72W nitrilase for bioprocess development.

Hydroxycarboxylic acid monomers can be used to prepare industrially important polymers. Enzymatic production of such hydroxycarboxylic acids is often preferred to chemical production since the reactions are run at ambient temperature, do not require strongly acidic or basic reaction conditions, and produce the desired product with high selectivity at high conversion. However, native enzymes often do not perform desired reactions with the efficiency required for commercial applications. Protein engineering was used to significantly increase the specific activity of nitrilase from Acidovorax facilis 72W for the conversion of 3-hydroxyvaleronitrile to 3-hydroxyvaleric acid. Overexpression of engineered nitrilase enzymes in Escherichia coli, combined with immobilization of whole cells in alginate beads that can be recycled many times has facilitated the development of a commercially viable bioprocess for production of 3-hydroxyvaleric acid.

Alginates↗
PubMed2007

Zeta-potentials of alginate-PLL capsules: a predictive measure for biocompatibility?

Alginate-poly-L-lysine (PLL) microencapsulation of cells is a promising approach to prevent rejection in the absence of immunosuppression. Clinical application, however, is hampered by insufficient insight in factors influencing biocompatibility of the capsules. By now, it has been accepted that not only the chemical composition of the materials applied but also other factors contribute to bioincompatibility. The zeta-potential serves as a measure for the electrical charge of the surface and has been shown to be a predictive value for the interfacial reactions between the biomaterial and the surrounding tissue in other applications. In the present study, we have assessed the streaming potential of alginate-PLL capsules composed of either low-, intermediate-, or high-guluronic (G) alginate to calculate the zeta-potential. The zeta-potentials of the capsules were compared to the biological response against the capsules at 4 weeks after implantation in the rat. We show that high-G and low-G alginates provoke a more severe response in the rat than capsules prepared of intermediate-G alginate. This correlates with a higher zeta-potential of the high-G and low-G alginates and by a change in zeta-potential at lower pH. These lower pH-levels are common directly after implantation as the consequence of a host-response associated with mandatory surgery. Our results suggest that we should not only consider the capsule properties under physiological circumstances to explain bioincompatibility but also the capsule features during common pathophysiological situations.

Alginates↗
PubMed2007

Effect of immersion disinfection with Perform-ID on alginate, an alginate alternative, an addition-cured silicone and resultant type III gypsum casts.

OBJECTIVE: This study investigated the effect of a commonly used immersion disinfectant upon three different impression materials and any subsequent effects on the abrasion resistance, hardness and surface detail reproduction of gypsum casts. DESIGN: A laboratory study. MATERIALS AND METHODS: Under standardised conditions a total of 120 impressions were made of a ruled test block using irreversible hydrocolloid (Alginoplast), an 'alginate alternative' addition-cure silicone (Position Penta) and a conventional addition-cure silicone (President). The impressions were examined for surface detail reproduction prior to and after disinfection with Perform-ID. The type III casts were evaluated for surface detail reproduction, surface hardness and abrasion resistance. RESULTS: (1) None of the disinfected alginate specimens could reproduce the 50 microm line. (2) Casts produced from the disinfected alginate were significantly less hard than from disinfected Position Penta and President (P <0.001). (3) Disinfection significantly affected the abrasion resistance of casts made from Position Penta (P = 0.029). (4) Disinfection did not significantly affect President or its subsequent casts (P >0.05). CONCLUSION: If disinfecting with Perform-ID, the impression should be made with a conventional addition-cured silicone if good surface detail reproduction of the impression material and a hard and abrasion resistant type III gypsum cast are required.

Alginates↗