PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 11760062

Development of a personal isocyanate sampler based on DBA derivatization on solid-phase microextraction fibers.

R Batlle·A Colmsjö·U Nilsson
View original source ↗Export metadata ↓

Abstract

The design and evaluation of a portable diffusive sampler for isocyanates is described. The sampler employs dibutylamine (DBA) loaded onto 60-microm polydimethylsiloxane-divinylbenzene (PDMS-DVB) solid-phase microextraction (SPME) fibers. The DBA-isocyanate derivative is then desorbed by sonication and analyzed by LC-MS using atmospheric pressure chemical ionization (APCI). The samplers are calibrated (i.e. the uptake rate is calculated) by exposing them to a known concentration of hexamethylene diisocyanate (HDI) in a standard gas-generation chamber. The uptake rate for the proposed method, at room temperature (25 degrees C), is 1.13 pg (min ppb(v))(-1) and the method detection limit is 3.2 microg m(-3), equivalent to less than 10% of the airborne time-weighted average (TWA) exposure limits recommended by both the National Institute for Occupational Safety and Health (NIOSH) and the American Conference of Governmental Industrial Hygienists (ACGIH). Practical points that should be considered when using the SPME device as a diffusive sampler are discussed.

Explore related subjects

Air Pollutants, OccupationalButylaminesEnvironmental MonitoringGas Chromatography-Mass SpectrometryGasesHumansIsocyanatesOccupational ExposureJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R Batlle, A Colmsjö, U Nilsson. 2001. Development of a personal isocyanate sampler based on DBA derivatization on solid-phase microextraction fibers.. https://doi.org/10.1007/s002160101023

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Exposure to mercury in the mine of Almaden.

OBJECTIVES: To describe the process for obtaining mercury and the historical exposure of Almadén miners to mercury. METHODS: Information on every workplace and historical data on production, technological changes in the productive process and biological and environmental values of mercury was collected. A job-exposure matrix was built with these values and the exposure to inorganic mercury was estimated quantitatively as mug/l of urine mercury. A cumulative exposure index was calculated for every worker by adding the estimates for every year in the different workplaces. RESULTS: In the mine, the highest exposures occurred during drilling, with values up to 2.26 mg/m3 in air, 2194 microg/l in urine and 374 microg/l in blood. Furnace operation and cleaning were the tasks with the highest values in metallurgy, peaking up to 3.37 mg/m3. The filling of bottles with mercury by free fall gave values within a range of 1.13-2.43 mg/m3 in air; these values dropped to 0.32-0.83 mg/m3 after introducing a new ventilation system. The toxicity effects of high doses of inorganic mercury on the central nervous and urinary systems have been known for decades. CONCLUSIONS: The exposure of the workers in Almadén mines to mercury has been very high. The extremely high content cinnabar ore of the mine explains the increased concentrations of mercury in air at the work places. This, together with inadequate working conditions, explains the high mercury levels found in blood and urine during the study period.

Air Pollutants, Occupational↗
PubMed2007

Influence of start-up on PCDD/F emission of incinerators.

This study aims to evaluate the influence of start-up on polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) concentration in the stack flue gas of incinerators and its contributing PCDD/F emission. The PCDD/F emission of the first sample among three consecutive stack flue gas samples of five intermittent incinerators, which sampled at a stable combustion condition after start-up, is 2-3 times higher than the mean of the others. For verifying the PCDD/F characteristics of incinerators during start-up, one continuous MSWI was investigated for two years. The elevated PCDD/F emissions of the MSWI during start-up could reach 96.9 ng I-TEQN m(-3) and still maintained a high PCDD/F emission (40 times higher than the Taiwan emission limit) even 18 h after the injection of activated carbon, indicating the memory effect. Taking the MSWI for example, which consists of four incinerators, the estimated annual PCDD/F emission from normal operational conditions was 0.112 g I-TEQ. However, one start-up procedure can generate approximately 60% of the PCDD/F emissions for one whole year of normal operations. And the PCDD/F emission, which is the result of the start-ups of four incinerators, was at least two times larger than that of a whole year's normal operations, without consideration for the PCDD/F emission contributed by the long lasting memory effect.

Air Pollutants, Occupational↗