PubMed Health⌕ Search

PubMed · 11885233

Study on gutta-percha points using scanning electron microscopy and analysis with electron microprobe.

Abstract

A comparative study of the apical morphology and contour was performed with the scanning electron microscope at 45x, 70x and 300x, while the chemical composition of eight gutta-percha point brands was surveyed with an EDAX 9100 electron microprobe. They were classified according to their apical morphology as conical (25%) and truncate (75%), based on their contour as regular (50%) and irregular (50%) and according to their surface as without defects (50%) and with defects (50%). The analysis of inorganic compounds revealed the presence of varying proportions of Zn, Ba, Si, Mg. Ca, P, Cl and Al, possibly implying that the presence of Ba and Al could interfere with postendodontic repair or at least irritate the periapical area if inadvertently overfilled.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J Fernández Monjes, H Lopreite, B M Maresca, L Sierra. 1994. Study on gutta-percha points using scanning electron microscopy and analysis with electron microprobe.. https://pubmed.ncbi.nlm.nih.gov/11885233/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

X-ray spectrometry.

Explore the source record for details and available documents.

Electron Probe Microanalysis↗

Qualitative and quantitative determination of micro-inclusions by automated SEM/EDX analysis.

With the help of an automated SEM/EDX analysis system non-metallic micro-inclusions in steel can be detected on a metallographically prepared surface area. The system makes it possible to determine position, size, shape and composition of each particle. Usually more than 1000 inclusions are found on one scan area. Therefore a new offline evaluation method has been developed to classify the large amount of inclusions and calculate specific size and shape data. A summary sheet is created to show the area contents and the mean values of all important properties for each class. Size and XY distributions as well as binary and ternary phase diagrams are drawn to depict the results. The strengths of this analytical technique are demonstrated by evaluation of an LC (low-carbon) steel. Alumina, common spinel, sulfide and oxisulfide inclusions could be identified as dominant inclusion types in LC steel.

Electron Probe Microanalysis↗

Raman microscopy of selected tungstate minerals.

A series of tungstate bearing minerals including scheelite, stolzite, ferberite, hübnerite, wolframite, russellite, tungstenian wulfenite and cuprotungstite have been analyzed by Raman microscopy. The results of the Raman spectroscopic analysis are compared with published data. These minerals are closely related and often have related paragenesis. Raman microscopy enables the selection of individual crystals of these minerals for spectroscopic analysis even though several of the minerals can be found in the same matrix because of the pargenetic relationships between the minerals. The Raman spectra are assigned according to factor group analysis and related to the structure of the minerals. These minerals have characteristically different Raman spectra. The nu1(Ag) band is observed at 909 cm(-1) and although the corresponding nu1(Bu) vibration should be inactive a minor band is observed around 894 cm(-1). The bands at 790 and 881 cm(-1) are associated with the antisymmetric and symmetric Ag modes of terminal WO2. The band at 695 cm(-1) is interpreted as an antisymmetric bridging mode associated with the tungstate chain. The nu4(Eg) band was absent for scheelite. The bands at 353 and 401 cm(-1) are assigned as either deformation modes or as r(Bg) and delta(Ag) modes of terminal WO2. The band at 462 cm(-1) has an equivalent band in the infrared at 455 cm(-1) assigned as delta(as)(Au) of the (W2O4)n chain. The band at 508 cm(-1) is assigned as nu(sym)(Bg) of the (W2O4)n chain.

Electron Probe Microanalysis↗