PubMed Health⌕ Search

PubMed · 12102316

Cosolvent effects on sorption isotherm linearity.

Abstract

Sorption-desorption hysteresis, slow desorption kinetics, and other nonideal phenomena have been attributed to the differing sorptive characteristics of the natural organic polymers associated with soils and sediments. In this study, aqueous and mixed solvent systems were used to investigate the effects of a cosolvent, methanol, on sorption isotherm linearity with natural organic matter (NOM), and to evaluate whether these results support, or weaken, the rubbery/glassy polymer conceptualization of NOM. All of the sorption isotherms displayed some nonlinear character. Our data indicates that all of the phenanthrene and atrazine isotherms were nonlinear up to the highest equilibrium solution concentration to solute solubility in water or cosolvent ratios (Ce/Sw,c) used, approximately 0.018 and 0.070, respectively. Isotherm linearity was also observed to increase with volumetric methanol content (fc). This observation is consistent with the NOM rubbery/glassy polymer conceptualization: the presence of methanol in NOM increased isotherm linearity as do solvents in synthetic polymers, and suggests that methanol is interacting with the NOM, enhancing its homogeneity as a sorptive phase so that sorption is less bimodal as fc increases. When the equilibrium solution concentration was normalized for solute solubility in water or methanol-water solutions, greater relative sorption magnitude was observed for the methanol-water treatments. This observation, in conjunction with the faster sorption kinetics observed in the methanol-water sediment column systems, indicates that the increase in relative sorption magnitude with fc may be attributed to the faster sorption kinetics in the methanol-water systems, and hence, greater relative sorptive uptake for the rubbery polymer fraction of NOM at similar time scales.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Dermont C Bouchard. 2002. Cosolvent effects on sorption isotherm linearity.. https://doi.org/10.1016/s0169-7722(01)00213-3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

Dual radiolabeling to study protein adsorption competition in relation with hemocompatibility.

Human fibrinogen (Fg) and albumin (HSA) were labeled with (3)H and (14)C, respectively. Dual counting allowed the adsorbed amount of the two proteins to be determined simultaneously. Single adsorption, adsorption of the two proteins in competition, but also exchange (substitution by molecules of the same nature) and displacement (desorption under the action of the other protein) experiments were performed on two model surfaces, glass and polystyrene (PS), as well as on pure polyvinylchloride (PVC-s) and on PVC from blood bag (PVC-b). As expected, the adsorbed amount of a single protein is higher on a hydrophobic compared to a hydrophilic surface. When the two proteins are adsorbed in competition, they are found in equal proportion on glass, while HSA is twice more abundant than Fg on PS and PVC-s and about six times more abundant on PVC-b. This trend is related to an increase of the water contact angle of the substrates. For PVC-b, the contact angle is affected by the presence of aliphatic components exposed at the extreme surface, as determined by angle-resolved X-ray photoelectron spectroscopy. In exchange and displacement experiments, the first adsorbed molecules remain dominating on PS while they can be removed from glass. Given the known importance of HSA and Fg adsorption for the fate of materials placed in contact with blood, the method described in this paper may be used as a first approach to orient the design of surfaces with improved hemocompatibility.

Adsorption↗

Effective immobilization of subunit protein in mesoporous silica modified with ethanol.

Ethoxylated FSM-type mesoporous silica (folded-sheet mesoporous material) with a pore diameter of 6.2 nm (FSM6.2) remarkably enhances rigidly of the structure in aqueous solutions. The esterified material could be used successfully as an adsorbent to accommodate subunit protein, methemoglobin (Fe(3+)). Furthermore, methemoglobin (Fe(3+)) in the pores of ethoxy-FSM is maintained a peroxidase activity similar to the native, indicating methemoglobin retains its fore subunit structure in the pores of FSM6.2.

Adsorption↗