PubMed Health⌕ Search

PubMed · 12350105

Laser-based non-fluorescence detection techniques for liquid separation systems.

Abstract

Over the last two decades, the possibility to use lasers for detection purposes in column liquid chromatography (LC) and capillary electrophoresis (CE) received much attention in the analytical chemistry literature. Most attention has been devoted to laser-induced fluorescence. The present review covers developments on non-fluorescence techniques for LC and CE. The techniques considered are thermal lens spectrometry, photoacoustic detection, refractive index detection including refractive index backscattering, Raman spectroscopy and degenerate four-wave mixing (a special mode of transientholographic spectroscopy). The paper starts with an outline of the characteristics of lasers; it ends with an overall evaluation and a discussion of the perspectives of the techniques dealt with.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T de Beer, N H Velthorst, U A Th Brinkman, C Gooijer. 2002-09-20. Laser-based non-fluorescence detection techniques for liquid separation systems.. https://doi.org/10.1016/s0021-9673(02)01038-5

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Practical all-fiber source of high-power, 120-fs pulses at 1 micrometre.

Amplification of femtosecond pulses at 1.03 micrometre in a standard Yb-doped single-mode fiber is reported. A pulse energy of 8 nJ and an average power of 400 mW are obtained, limited by available pump power. To our knowledge these are the highest pulse energy and average power obtained from an integrated, single-mode fiber amplifier. After dechirping, 120-fs, 6-nJ pulses are obtained. A practical fiber-based source with performance comparable with that of a bulk solid-state laser is thus demonstrated, and scaling to substantially higher powers will be possible.

Lasers↗

Generation of 50-fs, 5-nJ pulses at 1.03 micrometre from a wave-breaking-free fiber laser.

We report the generation of 6-nJ chirped pulses from a mode-locked Yb fiber laser at 1.03 micrometre. A linear anomalous-dispersion segment suppresses wave-breaking effects of solitonlike pulse shaping at high energies. The dechirped pulse duration is 50 fs, and the energy is 5 nJ. This laser produces twice the pulse energy and average power, and approximately five times the peak power, of the previous best mode-locked fiber laser. It is to our knowledge the first fiber laser that directly offers performance similar to that of solid-state lasers such as Ti:sapphire.

Lasers↗

Amplification of xenon NMR and MRI by remote detection.

A technique is proposed in which an NMR spectrum or MRI is encoded and stored as spin polarization and is then moved to a different physical location to be detected. Remote detection allows the separate optimization of the encoding and detection steps, permitting the independent choice of experimental conditions and excitation and detection methodologies. In the initial experimental demonstration of this technique, we show that taking dilute 129Xe from a porous sample placed inside a large encoding coil and concentrating it into a smaller detection coil can amplify NMR signal. In general, the study of NMR active molecules at low concentration that have low physical filling factor is facilitated by remote detection. In the second experimental demonstration, MRI information encoded in a very low-field magnet (4-7 mT) is transferred to a high-field magnet (4.2 T) to be detected under optimized conditions. Furthermore, remote detection allows the utilization of ultrasensitive optical or superconducting quantum interference device detection techniques, which broadens the horizon of NMR experimentation.

Lasers↗