Plasma arc curing lights for orthodontic bonding.

Abstract

Xenon plasma arc lights were introduced recently for light-cured orthodontic bonding. Compared with a conventional tungsten-quartz-halogen light source, these high-intensity lights promise a dramatic reduction in curing time. The purpose of this in vitro investigation was to evaluate bond strength with 2 commercially available plasma arc lights and reduced curing intervals. Brackets were bonded to 150 extracted human teeth (75 premolars, 75 incisors) with a composite adhesive. Intervals of 2 and 6 seconds were used for curing with the plasma arc lights; a control group was bonded with a halogen light source and 20 seconds of light exposure per bracket. Bond strength testing was performed with a universal testing machine. A substantial reduction in curing time was possible with both plasma arc units. Significantly lower bond strength values were found for premolar brackets bonded with plasma arc curing lights and the shortest curing interval of 2 seconds compared with the longer curing time of 6 seconds or the standard curing time with the halogen light. Although 2 seconds of curing might be adequate to achieve acceptable bond strength values for the incisors, the Weibull analysis indicated a higher probability of bond failure for premolar brackets in particular. Six seconds of curing time is recommended for bonding stainless steel brackets with xenon plasma arc light sources.