PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 12510764

Microfluidic actuation using electrochemically generated bubbles.

Susan Z Hua·Frederick Sachs·David X Yang·Harsh Deep Chopra
View original source ↗Export metadata ↓

Abstract

Bubble-based actuation in microfluidic applications is attractive owing to elementary microfabrication requirements. In the present study, the mechanical and chemical characteristics of electrochemically generated bubble valves were studied. By generating electrochemical bubbles as valves directly inside the channel, valves could be closed and opened in milliseconds. Whereas bubble inflation (or valve closing) rate increases with applied voltage, small microfluidic dimensions accelerate bubble deflation rates. It is found that bubbles need not collapse fully to restore full flow, and the channel opens when its hydraulic resistance equals that between the bubble and the wall--a process requiring only milliseconds. Since only picomoles of salt are needed to generate bubbles, pH gradients that are invariably associated with electrochemical reactions were readily suppressed by using a small amount of buffer, as visualized by a pH-sensitive fluorescent dye. A range of common laboratory reagents and electrolytes in varying concentrations, including weak to strong acids and bases, as well as nonaqueous/aqueous mixtures were successfully tested. Using such bubble valves, an eight-way multiplexer was fabricated and tested.

Explore related subjects

BuffersElectrochemistryFluorescenceFluorescent DyesHydrogen-Ion ConcentrationMicrochemistryTime FactorsJournal ArticleResearch Support, Non-U.S. Gov'tResearch Support, U.S. Gov't, Non-P.H.S.Research Support, U.S. Gov't, P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Susan Z Hua, Frederick Sachs, David X Yang, Harsh Deep Chopra. 2002-12-15. Microfluidic actuation using electrochemically generated bubbles.. https://doi.org/10.1021/ac0259818

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2003

Analysis of synthetic anti-diabetic drugs in adulterated traditional Chinese medicines by high-performance capillary electrophoresis.

Four synthetic anti-diabetic drugs, acetohexamide (ACE), chlorpropamide (CHL), glibenclamide (GLI) and tolbutamide (TOL), which can be found as adulterants in traditional Chinese medicines (TCMs) were assayed simultaneously using high-performance capillary electrophoresis (HPCE) in 4 min with UV detection at 200 nm. The electrolyte was a buffer solution containing 100 mM phosphate buffer (NaH2PO4/Na2B4O7, pH 7.5). Applied voltage was 15.0 kV and temperature was 30 degrees C. 2-(4-Hydroxyphenyl) ethyl ammonium chloride (HEA) was used as an internal standard. The effects of buffer concentration, pH and supplied voltage on separation were investigated. The relative standard deviations (R.S.D.) of these anti-diabetic drugs for intra-day and inter-day analyses were 0.23-4.27 and 1.23-6.33%, respectively. The recoveries of the synthetic drug adulterants in traditional Chinese medicinal formula ranged from 81.3 to 105.5%. GLI was found and determined in a real sample of TCM.

Buffers↗
PubMed2003

Effects of relative humidity and buffer additives on the contact printing of microarrays by quill pins.

DNA microarrays printed with quill pins exhibit significant variation in probe DNA spots. Interspot variations and nonuniform distribution of probe within spots are major sources of experimental uncertainty in microarray analysis. To gain better insight into the sources of variation, we analyzed 450 consecutive depositions printed at relative humidities between 40 and 80% using three print buffers. Increasing relative humidity improved printing performance by delaying pin failure but did not reduce the variability in spot characteristics. Adding either betaine or dimethyl sulfoxide (DMSO) to the print buffer also improved quill pin performance. Least interspot variation was observed with the DMSO additive printed at 80% relative humidity, but this additive also resulted in the greatest intraspot variation. Least intraspot variation was observed with 1.5M betaine printed at 60% relative humidity, but these conditions produced microarrays with high interspot variability. Evaporation of printing solution from the quill reservoir appeared to be the primary cause of interspot and intraspot variations. Our studies indicate that relative humidity and printing solution additives reduce evaporation. Based on the spot variability requirements for a particular application, humidity and additives may be chosen to optimize either inter- or intraspot variability.

Buffers↗
PubMed2003

A new enzyme model for enantioselective esterases based on molecularly imprinted polymers.

An efficient enzyme model exhibiting enantioselective esterase activity was prepared by using molecular imprinting techniques. The enantiomerically pure phosphonic monoesters 4 L and 5 L were synthesized as stable transition-state analogues. They were used as templates connected by stoichiometric noncovalent interactions to two equivalents of the amidinium binding site monomer 1. After polymerization and removal of the template, the polymers were efficient catalysts for the hydrolysis of certain nonactivated amino acid phenylesters (2 L, 2 D, 3 L, 3 D) depending on the template used. Imprinted catalyst IP4 (imprinted with 4 L) enhanced the hydrolysis of the corresponding substrate 2 L by a factor of 325 relative to that of a buffered solution. Relative to a control polymer containing the same functionalities, prepared without template 4 L, the enhancement was still about 80-fold, showing the highest imprinting effect up to now. In cross-selectivity experiments a strong substrate selectivity of higher than three was found despite small differences in the structure of the substrate and template. Plots of initial velocities of the hydrolysis versus substrate concentration showed typical Michaelis-Menten kinetics with saturation behavior. From these curves, the Michaelis constant K(M) and the catalytic constant k(cat) can be calculated. The enantioselectivity shown in these values is most interesting. The ratio of the catalytic efficiency k(cat)/K(M), between the hydrolysis of 2 L- and 2 D-substrate with IP4, is 1.65. This enantioselectivity derives from both selective binding of the substrate (K(M)L/K(M)D=0.82), and from selective formation of the transition state (k(cat)L/k(cat)D=1.36). Thus, these catalysts give good catalysis as well as high imprinting and substrate selectivity. Strong competitive inhibition is caused by the template used in imprinting. This behavior is also quite similar to the behavior of natural enzymes, for which these catalysts are good models.

Buffers↗