PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 12541701

[A simple method for preparing reversed-phase electrochromatographic column and its evaluation].

J L Zhang·T H Zhou
View original source ↗Export metadata ↓

Abstract

The packed column was prepared with a simple method by combination of vacuum filling and pressure compressing. The reproducibility of efficiency and retention time was evaluated. The mixture of thiourea and three aromatic compounds was used. RSD values of retention time were smaller than 2.2% and RSD values of efficiency were smaller than 7.5%. The influence of voltage, phosphate concentration, acetonitrile volume fraction and column temperature on the electroosmotic flow and capacity factor of neutral compounds was investigated. Acetonitrile concentration had significant effect on the electroosmotic flow and capacity factor of neutral compounds. High concentration of acetonitrile improved the elution ability. Low concentration of acetonitrile improved the resolution. Voltage, phosphate concentration, and column temperature also had effects on the electroosmotic flow and capacity factor of neutral compounds, but the effects were smaller than the concentration of acetonitrile. These results gave a guide to select separation conditions in capillary reversed-phase electrochromatography.

Explore related subjects

BenzeneChromatography, Micellar Electrokinetic CapillaryElectricityElectrophoresis, CapillaryTolueneEnglish AbstractJournal ArticleResearch Support, Non-U.S. Gov't

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J L Zhang, T H Zhou. 2000. [A simple method for preparing reversed-phase electrochromatographic column and its evaluation].. https://pubmed.ncbi.nlm.nih.gov/12541701/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Blue-shifting hydrogen bond in the benzene-benzene and benzene-naphthalene complexes.

Ab initio complete optimizations at MP2/6-31++G** level have been performed in the T-shaped geometry of the benzene-benzene and benzene-naphthalene complexes. To check the effect of the basis set superposition error (BSSE), optimizations have been done in the BSSE corrected and BSSE uncorrected potential energy surfaces. The BSSE effect in the calculation of the Hessian has also been evaluated to check its influence in the frequency values. Quantum theory atoms in molecules (QTAIM) calculations have also been performed on both dimers. Intermolecular energies differ around a 25% when the optimization is performed with or without counterpoise corrected gradients. The influence of BSSE is also noticeable in the distances. Frequency shifts show big changes because of the BSSE. Thus, uncorrected values are up 350% larger than corrected ones. The hypotheses given in the literature to explain the origin of the blue-shifting hydrogen bond do not seem to give a suitable explanation for all characteristics of the behavior found in the studied systems.

Benzene↗
PubMed2007

Effect of cluster size in kiloelectronvolt cluster bombardment of solid benzene.

Emission of benzene molecules by 5-keV cluster bombardment of a range of carbon projectiles from C6H6 to C180 is studied by a coarse-grained molecular dynamics (MD) technique. This approach permits calculations that are not feasible using more complicated potential energy functions, particularly as the interesting physics associated with the ion impact event approaches the mesoscale. These calculations show that the highest ejection yields are associated with clusters that deposit their incident energy 15-20 A below the surface. The highest yield for the projectiles is produced by the C20 and C60 projectiles. The results from the MD simulations are also compared favorably to an analytical model based on fluid dynamics to describe the energy deposition. The analytical model is then utilized to extend the range of the calculations to higher incident energies. The issue of the relative amount of chemical fragmentation and intact molecular desorption is also examined for the benzene crystal. These results show that damage accumulation at high-incident fluence should not be problematic and that it should be possible to perform molecular depth profiling via secondary ion mass spectrometry experiments. In general, the approach presented here illustrates the power of combining a simplified MD method with analytical strategies for describing a length scale that is difficult to achieve with traditional MD calculations.

Benzene↗
PubMed2007

Membrane introduction/laser photoionization time-of-flight mass spectrometry.

Two-photon resonance enhanced multiphoton ionization (REMPI) has been shown to be a unique ionization method for mass spectrometry, exhibiting both high sensitivity and chemical selectivity. Because REMPI is a gas-phase method, its applications have been limited either to direct analysis of vapor phase samples, or in conjunction with an initial laser desorption or other vaporization step. We describe here for the first time a combination of membrane introduction mass spectrometry (MIMS) and REMPI with time-of-flight mass spectrometry (TOF-MS), which allows for the direct analysis of trace amounts of organic compounds in water samples. The objective of our research was the detection of very low levels of aromatic contaminants, particularly benzene, toluene, and xylene (BTX), in aqueous solutions without interference due to the water. We have measured limits of detection (LOD) for selected aromatics in water below 1 part-per-trillion with an averaging time of less than 10 s using a continuous sample flow.

Benzene↗