PubMed Health⌕ Search

PubMed · 12547522

Solid phase speciation of arsenic by sequential extraction in standard reference materials and industrially contaminated soil samples.

Abstract

Availability, mobility, (phyto)toxicity and potential risk of contaminants is strongly affected by the manner of appearance of elements, the so-called speciation. Operational fractionation methods like sequential extractions have been applied for a long time to determine the solid phase speciation of heavy metals since direct determination of specific chemical compounds can not always be easily achieved. The three-step sequential extraction scheme recommended by the BCR and two extraction schemes based on the phosphorus-like protocol proposed by Manful (1992, Occurrence and Ecochemical Behaviours of Arsenic in a Goldsmelter Impacted Area in Ghana, PhD dissertation, at the RUG) were applied to four standard reference materials (SRM) and to a batch of samples from industrially contaminated sites, heavily contaminated with arsenic and heavy metals. The SRM 2710 (Montana soil) was found to be the most useful reference material for metal (Mn, Cu, Zn, As, Cd and Pb) fractionation using the BCR sequential extraction procedure. Two sequential extraction schemes were developed and compared for arsenic with the aim to establish a better fractionation and recovery rate than the BCR-scheme for this element in the SRM samples. The major part of arsenic was released from the heavily contaminated samples after NaOH-extraction. Inferior extraction variability and recovery in the heavily contaminated samples compared to SRMs could be mainly contributed to subsample heterogeneity.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Samuel Van Herreweghe, Rudy Swennen, Carlo Vandecasteele, Valérie Cappuyns. 2003. Solid phase speciation of arsenic by sequential extraction in standard reference materials and industrially contaminated soil samples.. https://doi.org/10.1016/s0269-7491(02)00332-9

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Deficient arsenic methylation and global proteomic reprogramming in human keratinocytes during arsenic-induced skin carcinogenesis.

Chronic inorganic arsenic (iAs) exposure affects > 220 million people worldwide and skin cancer is a hallmark of long-term iAs exposure. Limited information exists regarding arsenic methylation by human keratinocytes and how methylation influences skin carcinogenesis. Inorganic arsenite (iAsIII) and its methylated metabolites disrupt diverse zinc finger proteins, leading to differential toxicity patterns. We examined arsenic methylation capacity in non-malignant human keratinocytes and interrogated proteomic remodeling across three stages of iAsIII induced malignant transformation using the well-established preclinical HaCaT model. Arsenic methylation was assessed by hydride generation cryotrapping inductively coupled-mass spectrometry and global proteomic changes were analyzed by tandem-mass tagging liquid chromatography-tandem mass spectrometry. Primary, hTERT-immortalized and HaCaT human keratinocytes exhibited negligible arsenic methylation, with iAsIII comprising at least 98.5% of total intracellular arsenic, attributable to minimal expression of arsenite methyltransferase. Proteomic profiling identified over 275 differentially expressed proteins at each stage of transformation, including multiple zinc finger proteins implicated in cell cycle control, RNA metabolism, and genome stability. Ingenuity® Pathway Analysis revealed progressive, coordinated disruption of cancer-associated pathways and regulatory networks over the transformation timeline, including zinc-coordinating upstream regulators that may explain widespread pathway dysregulation. Collectively, our findings suggest that iAsIII promotes skin carcinogenesis by disrupting C3H1- and C4-type zinc finger protein-centered regulatory networks that coordinate cancer-associated signaling and metabolic pathways in human keratinocytes, highlighting key candidates for future mechanistic studies.

Arsenic↗

Hydrogeochemical characteristics of the Tinto and Odiel Rivers (SW Spain). Factors controlling metal contents.

The Tinto and Odiel Rivers are strongly affected by acid mine drainage (AMD) due to the intense sulphide mining developed in their basins over the past 5000 years. In this study the results obtained from a weekly sampling in both rivers, before their mouth in the Ría of Huelva, over three and a half years of control are analysed. In the Tinto River, the concentrations of sulphates, Al, Cd, Co, Li and Zn are double to those of the Odiel as a consequence of lower dilution. However, the concentration of Fe in the Odiel River is 20 times lower, since the precipitation of Fe oxyhydroxysulphates caused by neutralisation processes is more intense. Lower As, Cr, Cu and Pb concentrations are also found in the Odiel River as, to a greater or lesser extent, they are sorbed and/or coprecipitated with Fe. Other elements such as Be, Mn, Ni and Mg show similar values in both systems, which is ascribed to lithological factors. The seasonal evolution of contaminants is typical of rivers affected by AMD, reaching a maximum in autumn due to the dissolution of evaporitic salts precipitated during the summer. Nevertheless, in the Tinto River, Ca, Na and Sr show a strong increase during the summer, probably due to a greater water interaction with marly materials, through which the last reach of the river flows. Barium has a different behaviour from the rest of the metals and its concentration seems to be controlled by the solubility of barite. Iron, As and Pb show different behaviours in both rivers, those for Fe and As possibly linked to the prevalence of different dissolved species of Fe. The different Pb pattern is probably due to the control of Pb solubility by anglesite or other minerals rich in Pb in the Tinto River.

Arsenic↗