PubMed Health⌕ Search

PubMed · 12656293

Fast transport simulation with an adaptive grid refinement.

Abstract

One of the main difficulties in transport modeling and calibration is the extraordinarily long computing times necessary for simulation runs. Improved execution time is a prerequisite for calibration in transport modeling. In this paper we investigate the problem of code acceleration using an adaptive grid refinement, neglecting subdomains, and devising a method by which the Courant condition can be ignored while maintaining accurate solutions. Grid refinement is based on dividing selected cells into regular subcells and including the balance equations of subcells in the equation system. The connection of coarse and refined cells satisfies the mass balance with an interpolation scheme that is implicitly included in the equation system. The refined subdomain can move with the average transport velocity of the subdomain. Very small time steps are required on a fine or a refined grid, because of the combined effect of the Courant and Peclet conditions. Therefore, we have developed a special upwind technique in small grid cells with high velocities (velocity suppression). We have neglected grid subdomains with very small concentration gradients (zero suppression). The resulting software, MODCALIF, is a three-dimensional, modularly constructed FORTRAN code. For convenience, the package names used by the well-known MODFLOW and MT3D computer programs are adopted, and the same input file structure and format is used, but the program presented here is separate and independent. Also, MODCALIF includes algorithms for variable density modeling and model calibration. The method is tested by comparison with an analytical solution, and illustrated by means of a two-dimensional theoretical example and three-dimensional simulations of the variable-density Cape Cod and SALTPOOL experiments. Crossing from fine to coarse grid produces numerical dispersion when the whole subdomain of interest is refined; however, we show that accurate solutions can be obtained using a fraction of the execution time required by uniformly fine-grid solutions.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Frieder Haefner, Siegrun Boy. Fast transport simulation with an adaptive grid refinement.. https://doi.org/10.1111/j.1745-6584.2003.tb02590.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Determination of free sulfite in wine by zone electrophoresis with isotachophoresis sample pretreatment on a column-coupling chip.

This work deals with the determination of free sulfite in wine by zone electrophoresis (ZE) with on-line isotachophoresis (ITP) sample pretreatment on a column-coupling (CC) chip with conductivity detection. A rapid pre-column conversion of sulfite to hydroxymethanesulfonate (HMS), to minimize oxidation losses of the analyte, was included into the developed analytical procedure, while ITP and ZE were responsible for specific analytical tasks in the separations performed on the CC chip. ITP, for example, eliminated the sample matrix from the separation compartment and, at the same time, provided a selective concentration of HMS before its transfer to the ZE stage of the separation. On the other hand, ZE served as a final separation (destacking) method and it was used under the separating conditions favoring a sensitive conductivity detection of HMS. In this way, ITP and ZE cooperatively contributed to a 900 microg/l concentration detectability for sulfite as attained for a 60 nl load of wine (a 15-fold wine dilution and the use of a 0.9 microl sample injection channel of the chip) and, consequently, to the determination of free sulfite when this was present in wine at the concentrations as low as 3 mg/l. The separations were carried out in a closed separation compartment of the chip with suppressed hydrodynamic and electroosmotic flows. Such transport conditions, minimizing fluctuations of the migration velocities of the separated constituents, made a frame for precise migration and quantitation data as achieved for HMS in both the model and wine samples. Ninety percent recoveries, as typically obtained for free sulfite in wine samples, indicate promising potentialities of the present method as far as the accuracies of the provided analytical results are concerned.

Calibration↗

Identification and characterization of Se-methyl selenomethionine in Brassica juncea roots.

The present work shows the identification and characterization of Se-methyl selenomethionine (SeMMet) as an important Se species in Brassica juncea roots when grown in the presence of Se-methionine (SeMet) as the Se source. SeMMet was isolated by liquid chromatography employing two different liquid chromatographic mechanisms: reversed-phase ion-pairing using heptafluorobutyric acid as counter ion and cation exchange using a pyridinium formate gradient (pH 3). Inductively coupled plasma mass spectrometry was used for the detection of Se. SeMMet was characterized by electrospray quadrupole time-of-flight MS in both a synthesized standard and in the roots extract using collision-induced dissociation of the selected ion. Preliminary evidence suggests that Brassica juncea may also produce dimethylselenonium propionate, although to a much lesser extent.

Calibration↗

Influence of the extraction mode on the yield of some furanocoumarins from Pastinaca sativa fruits.

Analysis of plant material is an important task in chemotaxonomical investigations, in search of plants with pharmacological activity or in standardisation of plant drugs. The choice of optimal conditions for the analysis of plant material and effect of extraction method on the yield of furanocoumarins from Pastinaca sativa fruits were examined. The following extraction methods were used in experiments: exhaustive extraction in Soxhlet apparatus, ultrasonification (USAE) at 25 and 60 degrees C, microwave-assisted solvent extraction in open and closed system (MASE) and accelerated solvent extraction (ASE). In most cases, the yield of furanocoumarins was highest by use of ASE method as well as by ultrasonification at 60 degrees C.

Calibration↗