PubMed Health⌕ Search

PubMed · 12818496

Interaction forces between particles containing grafted or adsorbed polymer layers.

Abstract

The interaction forces between particles containing grafted or adsorbed polymer layers have been investigated using rheological and surface force measurements. Polystyrene latex dispersions with grafted poly(ethylene oxide) (PEO) chains (M=2000) were used for the rheological measurements. Results were also obtained for latex dispersions stabilised with adsorbed graft copolymers of poly(methyl methacrylate-methacrylic acid) with methoxy capped PEO chains (M=750). The relative viscosity eta(r)-volume fraction phi curves for the latex dispersions with grafted PEO chains were established for three particle radii of 77.5, 306 and 502 nm. For comparison the eta(r)-phi curve was calculated using the Dougherty-Krieger equation. This allows one to obtain the adsorbed layer thickness delta as a function of phi. The results showed a decrease of delta with increase of phi, which was attributed to the interpenetration and/or compression of the PEO chains on increasing phi. Viscoelastic measurements as a function of phi showed a change from predominantly viscous to predominantly elastic response at a critical volume fraction, which indicated the onset of the strong steric repulsion when the polymer layers begin to overlap. A similar trend was obtained with the latex particles containing adsorbed graft copolymer layers. A scaling law was used to fit the elastic part of the logG'-log phi curve (where G' is the elastic modulus). This fit could be used to estimate the compressibility of the PEO chains. The correlation of the rheology of concentrated sterically stabilised dispersions with interparticle interactions was investigated by measuring the energy-distance curves for the graft copolymer that was adsorbed on smooth mica sheets. Using de Gennes scaling theory, it was possible to calculate the energy of interaction between the polymer layers. The high frequency modulus of the latex dispersions was obtained as a function of the volume fraction and the results were compared with those calculated from the potential of the mean force. The trends in the variation of the modulus with volume fraction were similar for the experimental rheological results and those calculated using the directly measured interaction forces. The above results demonstrated the powerful use of rheological measurements for studying the interaction between sterically stabilised dispersions in concentrated systems.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tharwat Tadros. 2003-07-01. Interaction forces between particles containing grafted or adsorbed polymer layers.. https://doi.org/10.1016/s0001-8686(03)00042-3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

Dual radiolabeling to study protein adsorption competition in relation with hemocompatibility.

Human fibrinogen (Fg) and albumin (HSA) were labeled with (3)H and (14)C, respectively. Dual counting allowed the adsorbed amount of the two proteins to be determined simultaneously. Single adsorption, adsorption of the two proteins in competition, but also exchange (substitution by molecules of the same nature) and displacement (desorption under the action of the other protein) experiments were performed on two model surfaces, glass and polystyrene (PS), as well as on pure polyvinylchloride (PVC-s) and on PVC from blood bag (PVC-b). As expected, the adsorbed amount of a single protein is higher on a hydrophobic compared to a hydrophilic surface. When the two proteins are adsorbed in competition, they are found in equal proportion on glass, while HSA is twice more abundant than Fg on PS and PVC-s and about six times more abundant on PVC-b. This trend is related to an increase of the water contact angle of the substrates. For PVC-b, the contact angle is affected by the presence of aliphatic components exposed at the extreme surface, as determined by angle-resolved X-ray photoelectron spectroscopy. In exchange and displacement experiments, the first adsorbed molecules remain dominating on PS while they can be removed from glass. Given the known importance of HSA and Fg adsorption for the fate of materials placed in contact with blood, the method described in this paper may be used as a first approach to orient the design of surfaces with improved hemocompatibility.

Adsorption↗

Effective immobilization of subunit protein in mesoporous silica modified with ethanol.

Ethoxylated FSM-type mesoporous silica (folded-sheet mesoporous material) with a pore diameter of 6.2 nm (FSM6.2) remarkably enhances rigidly of the structure in aqueous solutions. The esterified material could be used successfully as an adsorbent to accommodate subunit protein, methemoglobin (Fe(3+)). Furthermore, methemoglobin (Fe(3+)) in the pores of ethoxy-FSM is maintained a peroxidase activity similar to the native, indicating methemoglobin retains its fore subunit structure in the pores of FSM6.2.

Adsorption↗