PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 12875407

Three-component competitive adsorption model for flow-through PAC systems. 2. Model application to a PAC/membrane system.

Qilin Li·Benito J Mariñas·Vernon L Snoeyink·Carlos Campos
View original source ↗Export metadata ↓

Abstract

A three-component competitive adsorption kinetic model, developed and validated in part 1 of this study, was applied to a continuous-flow PAC/membrane system to study the effects of various system and operating parameters on organic removal. The model quantitatively describes the two competitive adsorption mechanisms that occur during adsorption of trace organic compounds by powdered activated carbon (PAC) in flow-through systems where the PAC is retained in the system: pore blockage and direct competition for adsorption sites. Model simulations were conducted to investigate the effects of influent water composition, membrane cleaning water quality, PAC pore size distribution, and system operation conditions such as hydraulic retention time, membrane cleaning interval, and PAC dosing method on treatment efficiency. Effects of these factors on adsorption capacity as well as surface diffusion rate and consequent removal of the trace organic compound were discussed. It was found that optimal operating conditions for maximum trace organic compound removal must be determined on the basis of the adsorption properties and concentrations of the competing compounds in the influent. For the conditions investigated in this study, the small strongly competing compound, p-DCB, had greater impact on atrazine removal than the large pore-blocking compound, PSS-1.8k. Various process design and operating parameters had complex and interrelated effects on the impact of competitive adsorption and corresponding trace contaminant removal efficiency in hybrid PAC/membrane systems.

Explore related subjects

AdsorptionAtrazineCarbonCarcinogensChlorobenzenesHerbicidesKineticsMembranes, ArtificialModels, TheoreticalWater MovementsWater PollutantsWater PurificationJournal ArticleResearch Support, Non-U.S. Gov'tResearch Support, U.S. Gov't, Non-P.H.S.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Qilin Li, Benito J Mariñas, Vernon L Snoeyink, Carlos Campos. 2003-07-01. Three-component competitive adsorption model for flow-through PAC systems. 2. Model application to a PAC/membrane system.. https://doi.org/10.1021/es020990j

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2026

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗
PubMed2007

Dual radiolabeling to study protein adsorption competition in relation with hemocompatibility.

Human fibrinogen (Fg) and albumin (HSA) were labeled with (3)H and (14)C, respectively. Dual counting allowed the adsorbed amount of the two proteins to be determined simultaneously. Single adsorption, adsorption of the two proteins in competition, but also exchange (substitution by molecules of the same nature) and displacement (desorption under the action of the other protein) experiments were performed on two model surfaces, glass and polystyrene (PS), as well as on pure polyvinylchloride (PVC-s) and on PVC from blood bag (PVC-b). As expected, the adsorbed amount of a single protein is higher on a hydrophobic compared to a hydrophilic surface. When the two proteins are adsorbed in competition, they are found in equal proportion on glass, while HSA is twice more abundant than Fg on PS and PVC-s and about six times more abundant on PVC-b. This trend is related to an increase of the water contact angle of the substrates. For PVC-b, the contact angle is affected by the presence of aliphatic components exposed at the extreme surface, as determined by angle-resolved X-ray photoelectron spectroscopy. In exchange and displacement experiments, the first adsorbed molecules remain dominating on PS while they can be removed from glass. Given the known importance of HSA and Fg adsorption for the fate of materials placed in contact with blood, the method described in this paper may be used as a first approach to orient the design of surfaces with improved hemocompatibility.

Adsorption↗
PubMed2007

Effective immobilization of subunit protein in mesoporous silica modified with ethanol.

Ethoxylated FSM-type mesoporous silica (folded-sheet mesoporous material) with a pore diameter of 6.2 nm (FSM6.2) remarkably enhances rigidly of the structure in aqueous solutions. The esterified material could be used successfully as an adsorbent to accommodate subunit protein, methemoglobin (Fe(3+)). Furthermore, methemoglobin (Fe(3+)) in the pores of ethoxy-FSM is maintained a peroxidase activity similar to the native, indicating methemoglobin retains its fore subunit structure in the pores of FSM6.2.

Adsorption↗