PubMed Health⌕ Search
Home/Archive/PubMed

PubMed · 1306220

[Home oxygen therapy using liquid oxygen system].

W Hida·M Sakurai·S Okabe·Hajime·Kurosawa·Y Kikuchi·T Takishima
View original source ↗Export metadata ↓

Abstract

Home oxygen therapy (HOT) for patients with chronic respiratory failure has been believed to increase the quality of life and to improve the prognosis of such patients. In Japan, HOT for chronic respiratory failure has been supported by health insurance since March 1985. Since then, patients with HOT have increased progressively, and it has been reported that there are now over 20,000 patients with HOT. The oxygen concentrator which extracts oxygen from atmospheric air has been commonly used as the oxygen delivery system. Recently the liquid oxygen system has provided an attractive, convenient source of oxygen. Since April 1990, HOT using liquid oxygen system has been supported by health insurance, and its use will become widespread in Japan. A major characteristic of this system is that oxygen condensed into a liquid form allows storage of a larger supply. This system consists of two parts: stationary type which stores the liquid oxygen, and a portable type which can easily be refilled with oxygen a larger source. In the present study, we examined the efficacy of portable liquid oxygen in 50 patients with chronic pulmonary diseases including patients with chronic respiratory failure who had PaO2 < 55 mmHg during air breathing. We measured changes of ten minutes walking distance (10 MD) and blood gas analysis with and without portable liquid oxygen. We also performed on estimation of efficacy of liquid oxygen by questionnaires in patients receiving liquid oxygen for HOT. We did not find a significant improvement of 10 MD with portable liquid oxygen, but found a significant improvement of arterial oxygen tension at the end of walking.(ABSTRACT TRUNCATED AT 250 WORDS)

Explore related subjects

Carbon DioxideChronic DiseaseFemaleHome Care ServicesHumansMaleMiddle AgedOxygenOxygen Inhalation TherapyQuality of LifeRespiratory InsufficiencyEnglish AbstractJournal Article

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W Hida, M Sakurai, S Okabe, Hajime, Kurosawa, Y Kikuchi, T Takishima. 1992. [Home oxygen therapy using liquid oxygen system].. https://pubmed.ncbi.nlm.nih.gov/1306220/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

PubMed2007

Exploiting the pressure effect on lipase-catalyzed wax ester synthesis in dense carbon dioxide.

The present work focuses on the thermodynamic interpretation of the lauryl oleate biosynthesis in high-pressure carbon dioxide. Lipase-catalyzed lauryl oleate production by oleic acid esterification with 1-dodecanol over immobilized lipase from Rhizomucor miehei (Lipozyme RM IM) was successfully performed in a sapphire window batch stirred tank reactor (BSTR) using dense CO(2) as reaction medium. The experiments were planned to elucidate the pressure effect on the reaction performance. With increasing the pressure up to 10 MPa, the catalytic efficiency of the studied enzyme improved rising up to a maximum and decreased at higher pressure values. Kinetic observations, exhibiting that dense CO(2) expanded reaction mixture in subcritical conditions led to higher performance than when diluted in a single supercritical phase, were elucidated by phase-equilibrium arguments. The experimental results were justified with emphasis on thermodynamic interpretation of the studied system. Particularly, the different reaction performances obtained were related to the position of the operating point with respect to the location of liquid-vapor phase boundaries of the reactant fatty acid/alcohol/CO(2) ternary system. The outlook for exploitation of CO(2) expanded phase at lower pressure compared to supercritical phase, with heterogeneous system in which the solid catalyst particles are exposed to dense CO(2) expanded reaction mixture, in developing new biotransformation schemes is promising.

Carbon Dioxide↗
PubMed2007

Tailoring porous silica films through supercritical carbon dioxide processing of fluorinated surfactant templates.

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.

Carbon Dioxide↗
PubMed2007

Electron photoemission from charged films: absolute cross section for trapping 0-5 eV electrons in condensed CO2.

The electron trapping or attachment cross section of carbon dioxide (CO2) condensed as thin films on a spacer of Ar is obtained using a simple model for electron trapping in a molecular film and then charge releasing from the same film by photon absorption. The measurements are presented for different electron exposures and impact energies, film thicknesses, and probing photon energies. The cross section for trapping an electron of incident energy between 0 and 5 eV reveals three different attachment processes characterized by a maximum at about 0.75 eV, a structured feature around 2.25 eV, and a shoulder around 3.75 eV. From the measurement of their dependence with the probing photon energy, the two lowest processes produce traps having a vertical electron binding energy of approximately 3.5 eV, whereas the highest one yields a slightly higher value of approximately 3.7 eV. The 0.75 eV maximum corresponds to the formation of vibrational Feshbach resonances in (CO2)n- anion clusters. The 2.25 eV feature is attributed to the formation of a vibrationally excited 2Piu anion in (CO2)n- clusters, followed by fast decay into its vibrational ground state without undergoing autodetachment. Finally, 3.75 eV shoulder is assigned to the well-known dissociative electron attachment process from 2Piu anion state producing the O- anion in the gas phase and the (CO2)nO- anions in clusters.

Carbon Dioxide↗