PubMed · 13578613
The source did not provide an abstract. Follow the original record for more information.
Explore connections, maps & timelines
A L CHAPMAN. 1958. Accident prevention.. https://pubmed.ncbi.nlm.nih.gov/13578613/
Cite the original work for its findings. Save a collection to share your selection of sources.
KEEP EXPLORING
Published data on accidents in human crowds that occurred over the past decade show that one of the fatal consequences of crowding was asphyxia, that is by crushing. Here a study was made of our ability to predict human crowd pressures at barriers and thereby be able to take preventive action before crushing causes injury. Utilizing the standard forward-backward autoregressive modeling techniques for spectral analysis of a measured signal, predictions of pressures generated by very high densities of pedestrians have been formulated. The study suggests that several minutes are available for corrective action to be taken to avoid an accident involving crushing of pedestrians.
More than two out of three of all fatal crashes in Maine occur on rural, two-lane collector or arterial roads. Head-on crashes on these roads account for less than 5% of the crashes, but they are responsible for almost half of all fatalities. Data analyzed in this study was provided by Maine Department of Transportation and covers all head-on crashes for 2000-2002 during which period there were 3,136 head-on crashes reported. Out of these, 127 were fatal crashes and 235 produced incapacitating but not fatal injuries. These two categories made up over 75% of the crash cost. A clear majority of head-on crashes on two-lane, rural roads in Maine were caused by drivers making errors or misjudging situations. Illegal/unsafe speed was a factor in 32% of the crashes while driver inattention/distraction was a primary factor in 28%. Fatigue was responsible for around one in 40 crashes and one in 12 fatal crashes. Alcohol or drugs was a factor in one in 12 crashes and one in nine fatal head-on crashes. Less than 8% of fatalities involved someone overtaking another vehicle, and only around 14% involved a driver intentionally crossing the centerline. Two in three fatal head-on crashes occurred on straight segments and 67% of these happened on dry pavement. There is a clear trend towards higher speed limits leading to a higher percentage of crashes becoming fatal or having incapacitating injuries. There is also a clear trend - if one keeps speeds constant and AADT within a certain range - that wider shoulders give higher crash severities. Also, for higher-speed roads, more travel lanes (than two) increase crash severity. In summary, there seems to be two major reasons why people get across the centerline and have head-on collisions: (a) people are going too fast for the roadway conditions; or (b) people are inattentive and get across the centerline more or less without noticing it. The latter category of crashes could probably be reduced if centerline rumble-strips were installed. More or less all head-on collisions could be eliminated if median barriers were installed. In-vehicle technology could also be used to significantly reduce the incidence of lane departures. Furthermore, today's speed limits should be better enforced since a high percentage of serious crashes involve illegal speeding. This should be combined with lowered speed limits for targeted high-crash segments.
Slipping and falling are common phenomena in both workplaces and our daily activities. The risks associated with slipping and falling are related to the materials of footwear/floor, contamination condition, and geometric design of the sole. Shoe soles of various tread design are very common. Tread pattern of the shoe affects friction especially under liquid-contaminated conditions. Verification of the effects of tread groove depth is significant in assisting designers in designing proper footwear for workers exposed to slippery floor conditions. In this study, we measured the friction coefficients using the Neolite footwear pads on the terrazzo, steel, and vinyl floors under three liquid-contaminated conditions. A Brungraber Mark II slipmeter was used. The footwear pads had tread grooves with a width of either 3 or 9mm. The depth of the tread grooves ranged from 1 to 5mm. The results showed that tread groove depth affected the friction coefficients significantly. Higher friction values were recorded for footwear pads with deeper tread grooves on wet and water-detergent-contaminated floors. The averaged coefficient of friction (COF) gain per tread groove depth increase in millimeter under these two surface conditions ranged from 0.018 to 0.108, depending on the tread groove width, floor, and contaminant.