PubMed Health⌕ Search

PubMed · 13950658

Temperature and lambda phage reproduction.

Abstract

Groman, Neal B. (University of Washington, Seattle) and Grace Suzuki. Temperature and lambda phage reproduction. J. Bacteriol. 84:431-437. 1962.-The effect of temperature on lambda phage production in Escherichia coli K-12 was studied, and a temperature-phage yield relationship established. Phage yield declines slowly below optimal temperature and rapidly above the optimum. An extensive comparison of phage reproduction at 37 and 44 C was made when it was observed that at 44 C phage yield was reduced to 2 to 5% that at 37 C in the absence of any significant effect on bacterial growth. The reduced yield is manifest rather uniformly in every infected cell, and the reduction is due primarily to a speed-up of the lytic process. Temperature shift-up and shift-down experiments established that the temperature-affected step or process is initiated about 25 min after adsorption. This is close to the time the first intracellular phage appears. The data indicate that heat inactivation, lysogenization or major blocks in adsorption, penetration, replication, and maturation make minor contributions, if any, to the depression of the yield. Phenotypic adaptation of phage and host to the production of a greater yield at 44 C was not observed. There was no correlation observed between the enhanced thermoresistance of free lambdavir, tr(1) phage and ability to reproduce at 44 C.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

N B GROMAN, G SUZUKI. 1962. Temperature and lambda phage reproduction.. https://doi.org/10.1128/jb.84.3.431-437.1962

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Three-dimensional porous nano-hydroxyapatite@gelatin composite as efficient adsorbent for uranyl ion removal from low-level radioactive wastewater.

The contamination of water resources by uranyl (UO22+) ions poses significant environmental and health risks, requiring the development of efficient and sustainable remediation strategies. Adsorption-based techniques have emerged as promising approaches in the field of UO22+ removal, but the design of cost-effective, high-capacity, and environmentally friendly adsorbents remains challenging. In this study, a three-dimensional porous nano-hydroxyapatite@gelatin (nHAP@Ge) composite was synthesized through glutaraldehyde cross-linking, combining the structural stability of Ge with the high uranium affinity of nHAP. The optimized nHAP@Ge, with a nHAP:Ge mass ratio of 1:0.5, exhibited exceptional UO22+ removal efficiency (97 %), along with high adsorption capacity (364.03 mg/g). Systematic characterizations using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) methods revealed that the porous structure and surface functional groups (-OH, Ca2+, and PO43-) of the material synergistically contributed to binding UO22+ species. Furthermore, the incorporation of nHAP into the Ge framework resulted in enhanced thermal stability while significantly improving the UO22+ adsorption performance. This work presents a scalable, eco-friendly, and recyclable strategy for the effective treatment of uranium-contaminated water, with potential applications in nuclear wastewater treatment and environmental remediation.

Adsorption↗

Adsorption of biopolymers at hydrophilic cellulose-water interface.

The extent of adsorption (Gamma2(1)) of bovine serum albumin (BSA), beta-lactoglobulin, lysozyme, gelatin, and DNA from aqueous solution onto the hydrophilic surface of cellulose has been measured as function of biopolymer concentration at different temperatures, pHs, and ionic strengths, and in the presence of a high concentration of inorganic salts and denaturants. In all cases, the value of Gamma2(1) increases with the increase of biopolymer concentration (X2) in bulk and it attains a maximum value at a critical mole fraction concentration X2m. The value of Gamma2m depends upon the nature of protein, temperature, pH, and ionic strength, as well as the nature of neutral salts present in excess. Gamma2m for proteins at a fixed physicochemical condition stands in the following order: Gelatin>betalactoglobulin>lysozyme>BSA. The isotherms for adsorption of DNA nucleotides on cellulose surface at pH 4.0 have been compared at different temperatures and ionic strengths, and in the presence of high concentration of inorganic salts LiCl, NaCl, KCl, and Na2SO4. Values of Gamma2m for different systems have been evaluated and critically compared. At pH 6.0 and 8.0, Gamma2(1) values of DNA nucleotides on cellulose are all negative due to the excess positive hydration of cellulose. At pH 4.0, adsorption of nucleotides of acid, alkali, and heat-denatured DNA widely differ from each other and in the presence of excess concentration of urea becomes negative. The probable mechanisms of biopolymer-cellulose adsorption in terms of polymer hydration, steric interaction, London-van der Waals, hydrophobic, and other types of interactions have been discussed qualitatively. The standard free energy change for the adsorption of protein and DNA nucleotides on the cellulose surface at the state of adsorption saturation has been calculated in kJ per kg of cellulose using an integrated form of the Gibbs adsorption equation. The relation between DeltaG degrees and maximum affinities between biopolymers and the polysaccharide interface have been discussed for various systems.

Adsorption↗

In vitro interaction of human fibroblasts and platelets with a shape-memory polyurethane.

Physicochemical and mechanical properties, in vitro cytotoxicity, cytocompatibility, and platelet adhesion were investigated on a shape-memory polyether-based polyurethane (MM-5520 SMPu) using the polyether-based Pellethane 2363-80AE (Pell-2363 SPU) as reference. MM-5520 SMPu and Pell-2363 SPU showed similar average molecular weights and different surface properties, with a higher hydrophilicity and roughness for the SMPu. By tensile tests and dynamic mechanical analysis, the peculiar characteristics of the MM-5520 SMPu were evidenced: strong temperature-dependent behavior for SMPu compared with SPU, and a high shape recovery. MM-5520 SMPu did not show any cytotoxic effect on the adhesion and proliferation of human skin fibroblasts and gingival fibroblasts, and a good cytocompatibility was observed with both cell types, as demonstrated by cell counting and scanning electron microscopy observations. SMPu compared with SPU showed higher adsorption of extracellular matrix proteins such as fibronectin, fibrinogen, and collagens. Proteins adsorbed onto SMPu significantly enhanced the adhesion and proliferation of human fibroblasts. The interaction of SMPu with platelets was studied with platelet rich plasma. Fewer platelets adhered to the SMPu, with minor morphological variations than onto the SPU. The cytocompatibility and hemocompatibility of MM-5520 SMPu combined with its unique properties such as change in shape or in stiffness, depending on practical requirements, make this shape-memory material potentially advantageous for biomedical applications.

Adsorption↗